Daily Papers

Native GPU kernel generation turns high-level tensor programs into executable, efficient low-level code. Existing Large Language Models (LLMs) struggle with this task, while execution-based reinforcement learning suffers from sparse rewards, reward hacking, and training instability. We present MusaCoder, a full-stack training framework for native GPU kernel generation on CUDA and MUSA backends. MusaCoder combines progressive kernel-oriented data synthesis, diversity-preserving rejection fine-tuning, and execution-feedback Reinforcement Learning (RL) through MooreEval, a distributed verifier and reward environment. To stabilize RL, MusaCoder introduces PrimeEcho for first-turn-anchored multi-turn rewards, Buffered Dynamic Retry for recovering signals from all-failed hard samples, and MirrorPop for off-policy sequence filtering. Experiments on KernelBench and a MUSA-ported variant show that MusaCoder outperforms strong open-source and proprietary baselines in both correctness and empirical speedup, with the 9B model matching or exceeding frontier closed-source models and the 27B model establishing a new state of the art. These results demonstrate not only the effectiveness of full-stack execution-feedback training for native kernel generation, but also the capability of Moore Threads GPUs to support the complete LLM post-training stack, providing a practical foundation for large-model training and optimization on emerging accelerators.

In production large language model (LLM) deployments, high API availability guarantees do not equate to conversational continuity. When a primary provider experiences an outage or strict rate-limiting, naive stateless failover mechanisms successfully maintain uptime but silently discard conversation history, severely disrupting the user experience. To rigorously quantify and resolve this failure mode, we introduce two novel metrics: Continuity Preservation Rate (CPR) and Continuity Latency Overhead (CLO). We propose a stateful, multi-provider proxy architecture utilizing a History-Forwarding strategy to seamlessly reconstruct conversational state across heterogeneous LLM endpoints during failover events. Furthermore, we release continuity-bench, https://github.com/Vishal-sys-code/continuity-bench, an open evaluation harness designed to stress-test context preservation under high-concurrency provider failure conditions. Our empirical evaluation (N=750 failover events) demonstrates that our stateful proxy achieves a 99.20\% CPR [95\% CI: 98.27\%, 99.63\%], cleanly transferring deep conversational context to fallback providers, compared to a near-0\% preservation rate for standard stateless architectures. Finally, we characterize failover latency distributions, identifying the critical necessity of asynchronous exponential backoff with jitter to prevent cascading retry storms against strict-limit fallback APIs. Our results provide a principled foundation for building robust, state-preserving multi-model inference systems.

Large Language Model (LLM) serving systems remain fundamentally fragile, where frequent hardware faults in hyperscale clusters trigger disproportionate service outages in the software stack. Current recovery mechanisms are prohibitively slow, often requiring up to 10 minutes to reinitialize resources and reload massive model weights. We introduce KevlarFlow, a fault tolerant serving architecture designed to bridge the gap between hardware unreliability and service availability. KevlarFlow leverages 1) decoupled model parallelism initialization, 2) dynamic traffic rerouting, and 3) background KV cache replication to maintain high throughput during partial failures. Our evaluation demonstrates that KevlarFlow reduces mean-time-to-recovery (MTTR) by 20x and, under failure conditions, improves average latency by 3.1x, 99th percentile (p99) latency by 2.8x, average time-to-first-token (TTFT) by 378.9x, and p99 TTFT by 574.6x with negligible runtime overhead in comparison to state-of-the-art LLM serving systems.

Tool-using automation systems, from scripts and CI bots to agentic assistants, fail in recurring patterns. Common failures include unsafe side effects, invalid arguments, uncontrolled retries, and leakage of sensitive outputs. Many mitigations are model-centric and prompt-dependent, so they are brittle and do not generalize to non-LLM callers. We present Policy-First Tooling, a model-agnostic permission layer that mediates tool invocation through explicit constraints, risk-aware gating, recovery controls, and auditable explanations. The paper contributes a compact policy DSL, a runtime enforcement architecture with actionable rationale and fix hints, and a reproducible benchmark based on trace replay with controlled fault and misuse injection. In 225 controlled runs across five policy packs and three fault profiles, stricter packs improve violation prevention from 0.000 in P0 to 0.681 in P4, while task success drops from 0.356 to 0.067. Retry amplification decreases from 3.774 in P0 to 1.378 in P4, and leakage recall reaches 0.875 under injected secret outputs. These results make safety to utility trade-offs explicit and measurable.

Speculative decoding mitigates the latency of sequential generation in autoregressive Large Language Models (LLMs) by interleaving draft generation with target verification. However, existing parallel drafting backends often suffer from rapid accuracy degradation over long horizons, leading to high rejection rates during verification and suboptimal wall-clock speedups. We observe that drafting errors are not uniformly distributed but typically stem from localized high-uncertainty tokens that destabilize downstream generation trajectories. Motivated by this token error pattern, we propose CURE, a budget-aware dynamic repair tree designed to repair errors at uncertainty focal points without incurring prohibitive tree-verification overheads. Specifically, our method uses predictive confidence margins to dynamically locate candidate error tokens within a block-parallel draft, expands bounded repair paths only at these fragile nodes, and employs a novel repair resynchronization mechanism to realign draft states post-verification. Evaluations on code-generation benchmarks (HumanEval, MBPP, and LiveCodeBench-lite) and mathematical reasoning benchmark (GSM8K) demonstrate that CURE increases the average accepted length by 4.2-7.5% over parallel baselines without repair, translating to an end-to-end speedup of 2.66-3.49times over target-only decoding. Furthermore, we provide a plug-and-play repair module compatible with standard parallel drafting frameworks. We also characterize the trade-off between draft compute and verification efficiency.

Large language model (LLM) agents have shown strong decision-making capabilities in long-horizon interactive tasks, yet they still struggle to effectively leverage failed trajectories: full retries incur high interaction costs, while experience retrieval tends to dilute critical experience signals. To address this, we propose PivoARL, a self-feedback retry framework for experience exploitation in LLM agents. PivoARL identifies the pivotal erroneous turn through structured reflection and performs local retry only from the corresponding pivotal state, thereby reusing the correct prefix and reducing redundant interactions. From an information-gain perspective, we further show that pivotal retry concentrates useful experience signals near the error boundary, mitigating the signal dilution caused by state-agnostic experience utilization. Based on this insight, we design a pivotal-aware credit assignment mechanism that rewards correct prefixes while isolating erroneous suffixes, and optimize reflection quality through implicit reflection returns. We conduct a systematic evaluation on 4 agent tasks and 7 search-based QA benchmarks. Results show that PivoARL achieves significant improvements on Pass@2/3 across all tasks, with an average gain of about 11.5\% over MetaRL. Moreover, benefiting from contrastive preference signals induced by pivotal turns, PivoARL also consistently improves Pass@1 on over 80\% of the tasks. On Minesweeper environment, PivoARL improves over GiGPO by more than 45\% and reduces interaction turns by about 42\% on average compared with full-retry methods. Code is available at https://github.com/yuki-younai/PivoARL.

Large language model (LLM) agents are increasingly used for multi-step, stateful tool-use tasks, yet production reliability remains limited. Unlike static software repair, agent repair must recover dynamic trajectories whose early decisions can propagate into later errors and external state changes. Existing automatic remedies address only part of this problem: blind retry adds no diagnosis, outcome feedback says whether a run failed but not where or why, and self-reflection often lacks grounded evidence to prevent the same failure from recurring. We present AgentTether, a run-time repair framework that automates post-run diagnosis and guided recovery without modifying the underlying agent or environment. AgentTether abstracts each run into Transition Units, links them through a dependency-aware Critical Transition Graph, and localizes failure-critical subtrajectories by combining an offline normal-behavior model with a run-local graph detector. It then converts the localized cause into behavior-scoped guidance backed by cross-iteration Repair Memory, and can optionally apply guarded run-time intervention to keep the correction active during re-execution. The same design can be deployed as an offline diagnostic-and-guidance tool or as an online repair layer. We evaluate AgentTether on 261 tau-bench tasks across three domains with Qwen3.7-max, and test cross-model transfer on Banking with GPT-5.4. On the hardest Banking domain, AgentTether repairs 59.04% (49/83) of initially failed Qwen3.7-max tasks and 65.12% (56/86) of initially failed GPT-5.4 tasks. Overall, AgentTether improves repair effectiveness while reducing agent turns and end-to-end approach tokens, suggesting a practical reliability layer that can wrap existing agent deployments, reduce wasted re-execution, and improve recovery without retraining the agent.

Terminal agents have shown strong abilities in complex coding tasks. However, they often struggle to recover from errors during long-running execution (e.g., command errors, faulty implementations), eventually leading to task failures. To this end, we present ReTerm, a self-improving terminal agent trained by learning how to recover from its own failed terminal tasks. To support its training, we construct a customized data pipeline and produce ReTerm-10K, a high-quality dataset that provides effective recovery demonstrations for SFT cold start. Furthermore, we propose ReTerm-GRPO, an online RL algorithm that forks from the agent's own failure states to generate multiple independent self-recovery attempts. By learning from whether these attempts successfully complete the task, the agent self-improves through its own recovery experience. Built on Qwen3.5-9B, our ReTerm-9B achieves 34.8% Pass@1 on Terminal-Bench 2.0, improving over the base model by 14.6 points. Further analysis shows that our method achieves consistently higher recovery rates across diverse error categories compared with standard GRPO training. All code, data and model are released at https://github.com/twothsnd/ReTerm.

Coding agents powered by large language models (LLMs) repeatedly alternate between model inference and tool calls, creating long-lived sessions with reusable key-value (KV) states and asynchronous request resumptions. Logical readiness, however, does not ensure efficient admission in a shared serving system. Through direct trace analysis and trace-driven replay, we identify two mismatches: reusable KV states reside across storage tiers and incur unequal computational costs for state preparation, while requests with heterogeneous context lengths can decode inefficiently together. Our central insight is that exploiting admission flexibility can improve serving performance while preserving request progress. We present Coda, a coding-agent serving system that realizes this insight through a readiness-informed admission layer incorporating two mechanisms. Tiered-Aging state admission exploits bounded flexibility in admission order to improve admission efficiency and preserve request progress. Compatibility-Aware execution admission exploits flexibility in attention grouping within each model iteration to reduce mixed-context interference and improve shared decoding efficiency. For multi-worker configurations, Coda introduces a separate routing layer that considers KV-state residency, worker load, and request-to-worker context-length compatibility to guide efficient request placement. We evaluate Coda across different models and workloads against state-of-the-art coding-agent serving systems and vLLM. Across the single-worker and multi-worker experiments, Coda improves output-token and SLO-compliant throughput by 20.3% and 70.5% on average, with peak gains of 29.3% and 140.2%.

Many applications must provide low-latency LLM service to users or risk unacceptable user experience. However, over-provisioning resources to serve fluctuating request patterns is often prohibitively expensive. In this work, we present a best-effort serving system that employs deep reinforcement learning to adjust service quality based on the task distribution and system load. Our best-effort system can maintain availability with over 10x higher client request rates, serves above 96% of peak performance 4.1x more often, and serves above 98% of peak performance 2.3x more often than static serving on unpredictable workloads. Our learned router is robust to shifts in both the arrival and task distribution. Compared to static serving, learned best-effort serving allows for cost-efficient serving through increased hardware utility. Additionally, we argue that learned best-effort LLM serving is applicable in wide variety of settings and provides application developers great flexibility to meet their specific needs.

Diffusion-based large language models (dLLMs) promise to break the sequential latency bottleneck of autoregressive agents through parallel decoding, but recent evaluations show this efficiency does not transfer to embodied agentic competence: dLLM-backed agents repeatedly fall into retry loops, re-issuing an action long after it has failed. We give a mechanistic account of this failure and a training-free remedy. We trace the retry loop to the adaptivity of masked decoding: the sampler commits the positions it is most confident about and defers the uncertain ones, and at a failure state the context already offers a confident fill for the deferred decision, i.e. the failed action itself, so the retry is committed without the failure feedback ever being confronted. We model the resulting distortion of the action distribution as a task-blind corruption: contextually salient actions (e.g., the action just taken) receive inflated probability by a factor that depends on the state and the action but not on the task. Under this model, we analyse an invariance proposition: the task-blind factor cancels exactly from the reverse conditional, i.e. the likelihood of the task given the state and a candidate action, which coincides with the task posterior of an idealized uncorrupted model. Masked dLLMs evaluate the reverse conditional natively, unlike autoregressive models, by masking the task tokens and denoising, at the cost of a few parallel passes per candidate. We instantiate the rule as Reflect Reverse and evaluate it on four multi-turn embodied benchmarks, where it improves task success and progression rates over forward-scoring baselines.

Multi-agent systems (MAS) are increasingly capable of tackling complex real-world tasks, yet their reliance on inter-agent coordination, tool use, and long-horizon reasoning makes error recognition particularly challenging. Minor errors can propagate across agents, escalating into task failures while producing long, intertwined execution trajectories that impose significant costs for both human developers and automated systems to debug and analyze. Our key insight is that, despite surface differences in failure trajectories (e.g., logs), MAS errors often recur with similar structural patterns. This paper presents CORRECT, the first lightweight, training-free framework that leverages an online cache of distilled error schemata to recognize and transfer knowledge of failure structures across new requests. This cache-based reuse allows LLMs to perform targeted error localization at inference time, avoiding the need for expensive retraining while adapting to dynamic MAS deployments in subseconds. To support rigorous study in this domain, we also introduce CORRECT-Error, a large-scale dataset of over 2,000 annotated trajectories collected through a novel error-injection pipeline guided by real-world distributions, and further validated through human evaluation to ensure alignment with natural failure patterns. Experiments across seven diverse MAS applications show that CORRECT improves step-level error localization up to 19.8% over existing advances while at near-zero overhead, substantially narrowing the gap between automated and human-level error recognition.

Efficient KV cache management in LLMs is crucial for long-context tasks like RAG and summarization. Existing KV cache compression methods enforce a fixed pattern, neglecting task-specific characteristics and reducing the retention of essential information. However, we observe distinct activation patterns across layers in various tasks, highlighting the need for adaptive strategies tailored to each task's unique demands. Based on this insight, we propose DynamicKV, a method that dynamically optimizes token retention by adjusting the number of tokens retained at each layer to adapt to the specific task. DynamicKV establishes global and per-layer maximum KV cache budgets, temporarily retaining the maximum budget for the current layer, and periodically updating the KV cache sizes of all preceding layers during inference. Our method retains only 1.7% of the KV cache size while achieving ~85% of the Full KV cache performance on LongBench. Notably, even under extreme compression (0.9%), DynamicKV surpasses state-of-the-art (SOTA) methods by 11% in the Needle-in-a-Haystack test using Mistral-7B-Instruct-v0.2. The code will be released.

Large Language Models (LLMs) present a critical trade-off between inference quality and computational cost: larger models offer superior capabilities but incur significant latency, while smaller models are faster but less powerful. Existing serving strategies often employ fixed model scales or static two-stage speculative decoding, failing to dynamically adapt to the varying complexities of user requests or fluctuations in system performance. This paper introduces , a novel framework that reimagines LLM inference as an adaptive routing problem solved through multi-level speculative decoding. dynamically constructs and optimizes inference "paths" (chains of models) based on real-time feedback, addressing the limitations of static approaches. Our contributions are threefold: (1) An adaptive model chain scheduling mechanism that leverages performance profiling (execution times) and predictive similarity metrics (derived from token distribution divergence) to continuously select the optimal sequence of draft and verifier models, minimizing predicted latency per generated token. (2) A multi-level collaborative verification framework where intermediate models within the selected chain can validate speculative tokens, reducing the verification burden on the final, most powerful target model. (3) A synchronized state management system providing efficient, consistent KV cache handling across heterogeneous models in the chain, including precise, low-overhead rollbacks tailored for asynchronous batch processing inherent in multi-level speculation. Preliminary experiments demonstrate the validity of our method.

LLM-based workflows compose specialized agents to execute complex tasks, and these agents usually share substantial context, allowing KV-Cache reuse to save computation. Existing approaches either manage KV-Cache at agent level and fail to exploit the reuse opportunities within workflows, or manage cache at the workflow level but assume that each workflow calls a static sequence of agents. However, practical workflows are typically dynamic, where the sequence of invoked agents and thus induced cache reuse opportunities depend on the context of each task. To serve such dynamic workflows efficiently, we build a system dubbed PBKV (Prediction-Based KV-Cache Management). For each workflow, PBKV predicts the agent invocations in several future steps by fusing the guidance from historical workflows and context of the target workflow. Based on the predictions, PBKV estimates the reuse potential of cache entries and keeps the high-potential entries in GPU memory. To be robust to prediction errors, PBKV utilizes the predictions conservatively during both cache eviction and prefetching. Experiments on three workflow benchmarks show that PBKV achieves up to 1.85times speedup over LRU on dynamic workflows, and up to 1.26times speedup over the SOTA baseline KVFlow on the static workflow.

Existing agent benchmarks mainly evaluate final task success or tool-call correctness, providing limited insight into whether agents can reliably diagnose and recover from intermediate execution failures. This limitation becomes particularly critical in multi-turn parallel tool-use scenarios, where errors may propagate across dependent branches and trigger cascading failures. We introduce ParaRecover, a process-level benchmark for evaluating error localization and recovery in multi-turn parallel tool-use agents. Built upon a fine-grained taxonomy of 14 error types covering planning dependencies, tool selection, and argument matching, the benchmark comprises 10,626 instances spanning two difficulty levels. To enable finegrained, process-oriented evaluation, we further propose the SDE rubric, which measures structural integrity, diagnostic reasoning, and evolutionary strategy during agent execution.Experiments across more than ten mainstream LLMs reveal that even state-of-the-art models still struggle with multi-turn error propagation,implicit tool-use failures, and precise replanning. Moreover, we demonstrate that the SDE rubric provides effective supervision signals for improving agents' reflective recovery capabilities. Our data and code are available at https://github.com/gbw206/ParaRecover.

We address the problem of runtime trajectory anomaly detection, a critical capability for enabling trustworthy LLM agents. Current safety measures predominantly focus on static input/output filtering. However, we argue that ensuring LLM agents reliability requires auditing the intermediate execution process. In this work, we formulate the task of Trajectory Anomaly Detection. The goal is not merely detection, but precise error localization. This capability is essential for enabling efficient rollback-and-retry. To achieve this, we construct TrajBench, a dataset synthesized via a perturb-and-complete strategy to cover diverse procedural anomalies. Using this benchmark, we investigate the capability of models in process supervision. We observe that general-purpose LLMs, even with zero-shot prompting, struggle to identify and localize these anomalies. This reveals that generalized capabilities do not automatically translate to process reliability. To address this, we propose TrajAD, a specialized verifier trained with fine-grained process supervision. Our approach outperforms baselines, demonstrating that specialized supervision is essential for building trustworthy agents.

Mainstream LLM serving systems reuse prefix work mainly through paged or radix key-value (KV) caches. This is highly effective for high-throughput, high-concurrency serving, but it manages only one positional fragment of execution state: the KV cache. We study the opposite regime: low-latency, small-batch, on-device physical-AI serving, where interactive LLM agents, speech systems, and robot policies repeatedly branch, reset, interrupt, and re-enter under tight responsiveness budgets. We introduce execution-state capsules, a graph-bound checkpoint and restore mechanism for the complete restorable state at a committed boundary. FlashRT is a white-box, backend-facing kernel runtime whose evaluated NVIDIA CUDA backend runs captured graph plans over contiguous static buffers with no block-table indirection. Because the live state is a closed set of named buffers, a capsule can snapshot, restore, fork, or roll back the whole execution boundary, including KV, recurrent state, convolution state, MTP state, and metadata. This moves reuse from token-addressed KV fragments to graph-bound execution-state boundaries. On an RTX 5090, capsule restore is byte-exact at the stored-state level and token-identical under greedy decode. A KV-only ablation diverges, showing that recurrent state is load-bearing. GPU-resident snapshot and restore are sub-millisecond, and TTFT speedup over cold prefill grows from 3.9x at 2k tokens to 27x at 16k tokens. On Jetson AGX Thor and DGX Spark, the same correctness and structural properties hold. Capsules are not a replacement for high-throughput KV-cache serving; they define a complementary latency-first serving point for explicit execution-state reuse.

State-space models (SSMs) maintain a fixed-size recurrent state, but reading and writing it at every decoding step can bottleneck hybrid models. This eager state management causes large state I/O with low arithmetic intensity, leaves speculative decoding no cheap rollback, and feeds state quantization error into subsequent recurrent updates. We introduce ReplaySSM, which unrolls the recurrence to represent the state as a checkpoint and a buffer of recent SSM inputs. This separates output computation from checkpoint updates. By updating the checkpoint periodically, ReplaySSM avoids state writes on most steps and roughly halves the dominant state memory traffic. Keeping recent inputs also makes speculative rollback a buffer-pointer operation and enables output-only verification without materializing intermediate states. The same separation allows a low-precision checkpoint to serve output computation on most steps while a higher-precision checkpoint serves recurrent updates, so rounding error in the low-precision copy never enters later updates. We implement ReplaySSM in vLLM for Mamba-2 and Gated DeltaNet. At serving batch size 256, it accelerates standard decoding by 1.20--1.47times over a tuned vLLM baseline across four hybrid models, and delivers about 1.8times the throughput of vLLM's speculative decoding on the two 120B-class models. Separate state precisions also reduce output KL divergence and downstream accuracy losses compared with a shared low-precision checkpoint.

Serving systems for Large Language Models (LLMs) are often optimized to improve quality of service (QoS) and throughput. However, due to the lack of open-source LLM serving workloads, these systems are frequently evaluated under unrealistic workload assumptions. Consequently, performance may degrade when systems are deployed in real-world scenarios. This work presents BurstGPT, an LLM serving workload with 10.31 million traces from regional Azure OpenAI GPT services over 213 days. BurstGPT captures LLM serving characteristics from user, model and system perspectives: (1) User request concurrency: burstiness variations of requests in Azure OpenAI GPT services, revealing diversified concurrency patterns in different services and model types. (2) User conversation patterns: counts and intervals within conversations for service optimizations. (3) Model response lengths: auto-regressive serving processes of GPT models, showing statistical relations between requests and their responses. (4) System response failures: failures of conversation and API services, showing intensive resource needs and limited availability of LLM services in Azure. The details of the characteristics can serve multiple purposes in LLM serving optimizations, such as system evaluation and trace provisioning. In our demo evaluation with BurstGPT, frequent variations in BurstGPT reveal declines in efficiency, stability, or reliability in realistic LLM serving. We identify that the generalization of KV cache management, scheduling and disaggregation optimizations can be improved under realistic workload evaluations. BurstGPT is publicly available now at https://github.com/HPMLL/BurstGPT and is widely used to develop prototypes of LLM serving frameworks in the industry.

Large language models (LLMs) deployed in real-world agentic applications must be capable of replanning and adapting when mid-task disruptions invalidate their prior decisions. Existing dynamic benchmarks primarily measure whether LLMs can detect temporal changes in a timely manner, leaving the complementary challenge of adaptive replanning under spatio-temporal dynamics largely unexplored. We introduce STT-Arena (Spatio-Temporal Tool-Use Arena), a benchmark of 227 high-quality interactive tasks spanning nine spatio-temporal conflict types and four solvability levels. Each task is grounded in a realistic, executable environment equipped with injected spatio-temporal triggers that can abruptly invalidate an ongoing plan, forcing the model to detect the state shift and construct a revised execution strategy. Extensive evaluation of frontier LLMs reveals that even the SOTA proprietary models, including Claude-4.6-Opus, achieves less than 40\% overall accuracies, highlighting the fundamental difficulty of spatio-temporal dynamic reasoning. Systematic analysis of failure trajectories uncovers three recurring error modes of existing models: Stale-State Execution, Misdiagnosis of Dynamic Triggers, and Missing Post-Adaptation Verification. Guided by these findings, we propose an iterative trajectory refinement technique that eliminates these failure patterns from training data, and combine it with online RL to produce STT-Agent-4B which outperforms frontier LLMs on STT-Arena.

Existing guardrail systems for large language model agents operate as binary classifiers that block unsafe content, leaving organizations to discard failing outputs and retry from scratch. We introduce RAIL Guard, a closed-loop responsible AI pipeline that evaluates LLM outputs across eight measurable dimensions and iteratively remediates failing outputs through an evaluate-rewrite-reevaluate loop. We evaluate the pipeline across three experiments on four frontier LLMs and 4,276 content outputs plus 6,400 agent tool-call scenarios. Closed-loop remediation achieves 96.9% convergence versus 49.1% for block-and-retry, though the highest-convergence method reduces utility by 22.3%; feedback-driven self-repair achieves 86.6% convergence on fixable dimensions with no significant utility loss (p = 0.177). Pre-tool-call evaluation reduces unsafe agent executions by 33% (p = 0.007) with zero impact on task completion. We identify a key distinction between fixable dimensions that respond to remediation and structural dimensions (Transparency at 93.0%, Accountability at 92.8%, and Inclusivity at 82.5% failure) that require architectural rather than algorithmic solutions. The system is available as open-source SDKs.

Reusing the attention KV cache across requests is a standard way to cut prefill cost in long-context LLM serving, and production systems increasingly back the per-engine cache with a remote tier shared by every engine. We study such a tier in a disaggregated deployment of GLM-5.3, an FP8 mixture-of-experts model with multi-head latent attention (MLA), on 8xB300 nodes running prefill context parallelism (PCP8). Enabling the remote tier (LMCache with a Valkey store) left median time-to-first-token unchanged but raised the 16k-token p99 from 3.96 s to 17.3 s. Replaying a production request stream on an isolated engine, we find that a remote hit took 0.88 s against 0.31 s to recompute the prompt, and that synchronous loading turned a hit-heavy stream into an unstable queue: p99 83.32 s with the GPUs 7% busy. A two-term cost model explains both: a hit pays off only if the tier delivers more than B* = sR (2.53 GB/s for this model and GPU), and a fixed per-hit engine cost (T0 ~ 0.33 s) means that hits on prompts shorter than about 17k tokens cannot beat recompute at any bandwidth. Guided by the model, we (i) shard the MLA KV store across PCP ranks, with a proof that the existing minimum-over-ranks lookup returns the longest cached prefix and a load protocol that can never desynchronize collectives; (ii) partition the remote tier by rank, one server instance per rank with no coordination, which raises GET bandwidth 6.3x to 10.76 GB/s; (iii) add asynchronous loading to the sharded store; and (iv) fix three client bugs that caused unbounded stalls. On the hit-heavy stream, with 98.5% of prompt tokens served from the remote tier, p99 falls from 83.32 s to 0.67 s. The sharded store raises prefill throughput by 14%, and by 34% together with an upstream kernel fix. All changes are submitted upstream to LMCache.

Recent advances in large (vision) language models have enabled computer-use agents that automate digital workflows via fine-grained keyboard and mouse operations. However, such agents remain fragile in long-horizon settings, where errors accumulate and executed actions leave unintended side effects, making the ability to recover from failures critical. Yet, existing remedies remain inadequate: environment resets are infeasible in proprietary settings, action replay is prohibitively expensive over long horizons, and API-based rollback is limited to web environments, leaving model-based recovery largely unexplored. To address this gap, we present ReTrace, a scalable evaluation framework for systematically studying recovery behavior in computer-use agents. We formalize Transition-Consistent Recovery: identical downstream actions from the recovered and target states must yield identical outcomes. We operationalize this criterion through goal-oriented action replay following controlled error injection. Using ReTrace, we present the first systematic study of autonomous, model-based recovery, revealing that (i) ideal recovery can unlock model's latent task completion capabilities, (ii) current computer-use agents fail to exploit their latent recovery capabilities, and (iii) accurate model-based recovery yields measurable end-to-end gains. Together, these findings establish recovery as a fundamental capability for building reliable computer-use agents. Our code and dataset is available at https://github.com/BangProx/ReTRACE.

Tool-using large language model agents frequently replan, retry failed operations, delegate tasks, and resume after crashes. These behaviors can cause one user authorization to be requested and executed multiple times under freshly issued token identifiers, even when each individual token is single-use. We call this failure semantic replay: exceeding the execution budget of a token-independent authorization instance rather than merely reusing an old token identifier. We show that identifier-local token consumption cannot prevent fresh reissuance unless the issuer retains monotonic durable state over the authorized action, confirmation event, and remaining execution budget. We introduce CapLease, an authorization-consumption layer that follows proposal- and authority-level defenses, binds an authenticated user confirmation to a canonical action, and enforces transactional Issue-Prepare-Commit transitions. Across LLM-agent replanning, retry, delegation, concurrency, confirmation-replay, and crash-recovery scenarios, identifier-local tokens permit fresh semantic reissuance, whereas CapLease and an equally stateful Server Ledger prevent duplicate admission and, with an idempotent sink, duplicate external effects. Our results identify durable authorization state, rather than token representation alone, as the systems requirement for replay-resistant agent execution.

Diffusion language models (DLMs) iteratively refine a sequence, allowing earlier predictions to be revised as context evolves. This rollback capability distinguishes them from irreversible autoregressive generation, but makes inference costly. Every denoising update alters the global context, forcing both prompt and response states to be recomputed even though only response tokens are revisable. Key-value (KV) caching could reduce this cost, yet conventional caching assumes immutable historical states and is therefore difficult to reconcile with rollback. In this paper, we introduce Adaptive Reuse of Cached Hidden States for Efficient Rollback (Archer), a training-free KV caching method for rollback-capable DLMs. Archer asymmetrically keeps the mutable response synchronized with the current hypothesis while reusing prompt K/V within a bounded state neighborhood. Although prompt representations also change under bidirectional attention, their token identities remain fixed; bounded reuse therefore amortizes repeated prompt computation without caching mutable response states. It also delays feedback from tentative tokens, reducing premature reinforcement of transient high-confidence errors and giving rollback more opportunity to correct them. Our analysis characterizes prompt reuse as a reversibility-aligned cache boundary, bounds its state-dependent approximation error, and gives a decoder-margin condition for preserving full-refresh decisions. Existing DLM acceleration often trades quality for speed. Archer shifts this frontier, attaining the best mean performance of 33.63% together with a 2.57x mean speedup on the main suite. Across evaluated settings, it improves Pass@1 by up to 3.05 points and reaches up to 2.95x speedup. Controlled analyses connect the quality gain to delayed prompt feedback and validate state-aware refresh. Our code is available at https://github.com/Hxnng/Archer.

Large Language Model (LLM) agents can handle increasingly complex tasks, navigating long trajectories of observations and actions. As these trajectories grow, key-value (KV) cache I/O and storage become the dominant cost. Trajectories can also exceed the LLM's maximum context length, requiring control over active cache growth. Prior work uses context engineering to reduce cache size by trimming or summarizing history. However, modifying the trajectory prefix invalidates subsequent cached states and triggers costly re-prefilling of retained context. Task accuracy can also suffer when too little context is retained to limit re-prefill costs. We propose cache engineering as a new scheme. It allows agents to directly control their active KV cache without modifying the trajectory or re-prefilling retained context. Specifically, agents can proactively use drop to exclude selected cache from future attention and repos to adjust retained keys' position encodings. We formalize these cache operations and identify history dependence as a serving challenge: identical token sequences can yield different cache states under different cache operation sequences, making prefix matching insufficient for correct cache reuse. Thus, we co-design the AKV serving engine. It provides a stateless interface compatible with existing serving APIs, while internally managing stateful cache reuse, eviction, and restoration. Experiments show that a tool-response rolling-drop cache policy improves average benchmark scores by 1.7 points and reduces average cost by 27.7%, compared with conventional threshold-triggered summarization. With AKV, it achieves up to 1.2x the output throughput and a 1.5x speedup in P95 request latency. Recursive self-improvement of cache policies further reduces cost by 7.1% over expert design. Our code is at https://github.com/thu-nics/AKV.

Realistic evaluation of LLM serving systems requires online workloads, dynamic arrivals, queueing, and the serving engine's local scheduling for execution batching, but running such experiments on GPUs is expensive. Existing simulators reduce this cost, but often operate offline or in time-warped mode, re-implement serving-engine schedulers, or require accurate operator/kernel-level latency models. We present LLM-Emu, a serving-native emulator for vLLM that preserves the production HTTP, scheduling, KV-cache, and output-processing paths while replacing only GPU forward execution with profile-sampled latency and synthetic output tokens. Tested on two different GPUs, four model variants, two model families, two attention backends, and both Poisson and bursty ShareGPT workloads, LLM-Emu closely tracks real vLLM serving behavior: TPOT and ITL stay within 4.8% absolute error, E2E latency within 5.3%, and output throughput within 1.9%; TTFT is less stable, with maximum error 10.4%, reflecting its sensitivity to admission and queue state. These results suggest that lightweight, serving-native emulation can support practical online experimentation for LLM-serving systems. LLM-Emu is open sourced at https://github.com/AKafakA/llm-emu.

LLM-based evolution has emerged as a promising way to improve agents by refining non-parametric artifacts, but its wall-clock cost remains a major bottleneck. We identify that this cost comes from synchronized stage execution and imbalance inside each LLM-heavy stage. We present FlashEvolve, an efficient framework that replaces synchronized execution with asynchronous workers and queues, allowing different stages and steps to overlap. To handle data staleness introduced by asynchrony, FlashEvolve tracks artifact versions and applies different policies to update, discard, or patch stale artifacts. Unlike weight-space staleness in asynchronous RL, language-space staleness is inspectable and repairable: a stale artifact is not just delayed work, but readable evidence that the LLM can reflect on, revise, and turn into useful evolution signal. FlashEvolve further improves throughput and token efficiency with speculative stage completion and adaptive workflow control. On GEPA workloads, FlashEvolve improves proposal throughput by 3.5times on local vLLM and 4.9times on API serving over synchronous GEPA. The same design also applies to ACE and Meta-Harness.

Tool-using LLM agents are mostly evaluated assuming all tools work. When a tool times out, returns a week-stale value, or has its description poisoned in deployment, the developer needs a controlled way to reproduce the failure, test a fix, and confirm the fix worked before deployment. We present AgentCheck, an open-source web workbench that turns an MCP server into an intervention surface. AgentCheck runs an agent against its real tools and records every tool response, then re-runs the agent with the response perturbed by a fault (12 types) injector. Matching tool calls are replayed from cache, and later tool calls go live after the agent diverges. This yields a reproduce-intervene-confirm loop: the developer toggles a mitigation, re-runs against the identical fault, and sees if the failure goes away. Scoring has two parts: deterministic pass/fail rules, plus an LLM judge for interpretive labels, validated against human annotations. Across five agents, the best passes 105/120 scenarios and the weakest only 77. The failures are usually silent, confident use of incorrect tool outputs rather than crashes. On the weakest agent, a retry mitigation raises success on timeout error faults from as few as 30% of cases to 100%, whereas stale-data faults remain near 3-4 of 10 regardless of the mitigation. AgentCheck makes these failure modes reproducible, comparable, and verifiable before deployment.

Large Language Models (LLMs) are increasingly deployed in both latency-sensitive online services and cost-sensitive offline workloads. Co-locating these workloads on shared serving instances can improve resource utilization, but directly applying this approach to Prefill/Decode (P/D) disaggregated systems introduces severe load imbalance, as fluctuating request mixes alter the intrinsic P/D ratio. Existing dynamic adjustment techniques cannot keep up with the bursty traffic patterns of online services. We propose a latency-constraint disaggregated architecture, which separates cluster resources into latency-strict and latency-relaxed pools based on task latency requirements. This design enables flexible placement of offline decode tasks, mitigating P/D imbalance while preserving online performance. To fully exploit this flexibility, we propose (1) a bottleneck-based scheduler guided by a Roofline-based performance model for performance bottleneck based scheduling, and (2) a fast preemption mechanism that strictly enforces Service Level Objectives (SLOs) for online requests. Experiments on real-world traces show that compared to existing offline system approaches, our method improves offline throughput by up to 3x, while maintaining online request SLOs.

Diffusion Large Language Models (dLLMs) offer fast, parallel token generation, but their standalone use is plagued by an inherent efficiency-quality tradeoff. We show that, if carefully applied, the attributes of dLLMs can actually be a strength for drafters in speculative decoding with autoregressive (AR) verifiers. Our core insight is that dLLM's speed from parallel decoding drastically lowers the risk of costly rejections, providing a practical mechanism to effectively realize the (elusive) lengthy drafts that lead to large speedups with speculative decoding. We present FailFast, a dLLM-based speculative decoding framework that realizes this approach by dynamically adapting its speculation length. It "fails fast" by spending minimal compute in hard-to-speculate regions to shrink speculation latency and "wins big" by aggressively extending draft lengths in easier regions to reduce verification latency (in many cases, speculating and accepting 70 tokens at a time!). Without any fine-tuning, FailFast delivers lossless acceleration of AR LLMs and achieves up to 4.9times speedup over vanilla decoding, 1.7times over the best naive dLLM drafter, and 1.4times over EAGLE-3 across diverse models and workloads. We open-source FailFast at https://github.com/ruipeterpan/failfast.

Multi-agent LLM systems routinely generate multiple candidate responses that are aggregated by an LLM judge. To reduce the dominant prefill cost in such pipelines, recent work advocates KV cache reuse across partially shared contexts and reports substantial speedups for generation agents. In this work, we show that these efficiency gains do not transfer uniformly to judge-centric inference. Across GSM8K, MMLU, and HumanEval, we find that reuse strategies that are effective for execution agents can severely perturb judge behavior: end-task accuracy may appear stable, yet the judge's selection becomes highly inconsistent with dense prefill. We quantify this risk using Judge Consistency Rate (JCR) and provide diagnostics showing that reuse systematically weakens cross-candidate attention, especially for later candidate blocks. Our ablation further demonstrates that explicit cross-candidate interaction is crucial for preserving dense-prefill decisions. Overall, our results identify a previously overlooked failure mode of KV cache reuse and highlight judge-centric inference as a distinct regime that demands dedicated, risk-aware system design.

AI agents are increasingly deployed in multi-tenant cloud environments, where they execute diverse tool calls within sandboxed containers, each call with distinct resource demands and rapid fluctuations. We present a systematic characterization of OS-level resource dynamics in sandboxed AI coding agents, analyzing 144 software engineering tasks from the SWE-rebench benchmark across two LLM models. Our measurements reveal that (1) OS-level execution (tool calls, container and agent initialization) accounts for 56-74% of end-to-end task latency; (2) memory, not CPU, is the concurrency bottleneck; (3) memory spikes are tool-call-driven with a up to 15.4x peak-to-average ratio; and (4) resource demands are highly unpredictable across tasks, runs, and models. Comparing these characteristics against serverless, microservice, and batch workloads, we identify three mismatches in existing resource controls: a granularity mismatch (container-level policies vs. tool-call-level dynamics), a responsiveness mismatch (user-space reaction vs. sub-second unpredictable bursts), and an adaptability mismatch (history-based prediction vs. non-deterministic stateful execution). We propose AgentCgroup, an intent-driven eBPF-based resource controller that exploits agents ability to declare resource needs and reconstruct execution strategies, using hierarchical cgroup structures aligned with tool-call boundaries, in-kernel enforcement via sched_ext and memcg_bpf_ops, and runtime-adaptive policies. Preliminary evaluation demonstrates improved multi-tenant isolation and reduced resource waste. AgentCgroup is open-source at https://github.com/eunomia-bpf/agentcgroup

Deploying LLMs efficiently requires testing hundreds of serving configurations, but evaluating each one on a GPU cluster takes hours and costs thousands of dollars. Discrete-event simulators are faster and cheaper, but they require re-implementing the serving system's control logic -- a burden that compounds as frameworks evolve. We present Revati, a time-warp emulator that enables performance modeling by directly executing real serving system code at simulation-like speed. The system intercepts CUDA API calls to virtualize device management, allowing serving frameworks to run without physical GPUs. Instead of executing GPU kernels, it performs time jumps -- fast-forwarding virtual time by predicted kernel durations. We propose a coordination protocol that synchronizes these jumps across distributed processes while preserving causality. On vLLM and SGLang, Revati achieves less than 5% prediction error across multiple models and parallelism configurations, while running 5-17x faster than real GPU execution.

While Experience Replay - the practice of storing rollouts and reusing them multiple times during training - is a foundational technique in general RL, it remains largely unexplored in LLM post-training due to the prevailing belief that fresh, on-policy data is essential for high performance. In this work, we challenge this assumption. We present a systematic study of replay buffers for LLM post-training, formalizing the optimal design as a trade-off between staleness-induced variance, sample diversity and the high computational cost of generation. We show that strict on-policy sampling is suboptimal when generation is expensive. Empirically, we show that a well-designed replay buffer can drastically reduce inference compute without degrading - and in some cases even improving - final model performance, while preserving policy entropy.

LLM agents interact with Web services to perform tasks on users' behalf. Errors during these interactions can disrupt execution and prevent task completion, motivating external intervention. However, agents may self-recover through continued execution, raising the question of when to intervene and when to wait for self-recovery. We present an empirical study of errors and self-recovery in LLM agents. We construct ReInBench, a dataset containing 1,259 agent traces and 1,403 error events across computer-use and Web tasks. Our study examines how often and how quickly agents self-recover, how self-recovery relates to subsequent execution and task completion, and whether self-recovery can be predicted when an error occurs. We find that 725 error events self-recover, often within a few steps, with self-recovery performance differing across Execution LLMs. Self-recovery can also help agents recover from subsequent errors of the same type and support overall task completion. Intervention should therefore prioritize errors unlikely to self-recover, while allowing agents to continue when self-recovery is likely. Building on these empirical findings, we propose ReCoF, a method that predicts whether an error will self-recover to inform whether additional intervention is needed. ReCoF achieves an average relative improvement of 9.02% in Macro-F1 over the strongest baseline on ReInBench. Our code and data can be found at https://method-notes.github.io/ReCoF/.

Quantization is widely used to reduce the computational and memory demands of neural-network inference. In recurrent networks, however, the quantized state is stored and returned at the next time step, so the rule used to store that state can alter subsequent computations. Here, we introduce recurrent-state write-back to denote this rule and isolate its effect in a compact GRU encoder--decoder for fluorescence lifetime imaging, a molecular imaging modality used in quantitative biological imaging. A central task is estimating two lifetime parameters, the short-lived component τ1 and the long-lived component τ2, from high-noise time-resolved fluorescence signals. Holding the trained model fixed, replacing continuous state propagation with deterministic 4-bit state storage increases estimation errors for τ1 and τ2 by approximately 70x and 300x, respectively. Failure occurs when repeated small updates remain below the write threshold, leaving the stored state nearly fixed while the network continues to propose change. Error feedback, residual memory, and direction memory carry information from these suppressed updates across time and recover accuracy without retraining. Precision sweeps show that increasing state precision can worsen a fixed recurrent solution, while matched training shows that compatibility with the state interface can be learned. To test whether this behavior extends beyond the GRU, we repeat the post-training intervention in an independently trained LSTM, where coarse write-back reproduces the failure, error feedback restores accuracy, and state-specific interventions reveal greater sensitivity of the cell state than the hidden state. Our results establish recurrent-state write-back as a key determinant of low-precision recurrent dynamics and identify the state-storage interface as a central design consideration for quantized recurrent inference.

Agentic LLM applications interleave LLM generation requests with tool calls. These tool calls break the continuity of the workflow by creating pauses between LLM requests, bringing many challenges for the serving system, especially under multi-turn scenarios. Each pause potentially causes KV cache eviction and extra waiting time before entering the continuous batch for the following LLM request. Since these pauses happen for each call, this problem becomes increasingly severe as turn number grow for agentic programs. Previous works either fail to incorporate information from the tool call, evicting KV cache that leads to repetitive prefill or loading, or ignore the continuity of a multi-turn program, creating waiting time between turns that increases per-request latency. We present Continuum, a serving system to optimize job completion time for multi-turn agent workloads by combining tool-aware KV cache timeout with program-level scheduling. By predicting tool call durations in agentic workflows, Continuum selectively pins the KV cache in GPU memory with a time-to-live value based on total turn number. When combined with program-level first-come-first-serve, Continuum prevents scheduling bubbles, preserves multi-turn continuity, and optimizes for throughput for complex agentic workflows. By modeling the variability of tool call and agent program continuity, Continuum outperforms state-of-the-art baselines. Our evaluation on real-world agentic workloads (SWE-Bench and BFCL) with Llama-3.1 8B/70B models shows that Continuum significantly improves the average job completion times, and remains performant across different hardware setups and DRAM offloading schemes. Preview code is available at: https://github.com/Hanchenli/vllm-continuum

LLM serving systems process heterogeneous query workloads where different categories exhibit different characteristics. Code queries cluster densely in embedding space while conversational queries distribute sparsely. Content staleness varies from minutes (stock data) to months (code patterns). Query repetition patterns range from power-law (code) to uniform (conversation), producing long tail cache hit rate distributions: high-repetition categories achieve 40-60% hit rates while low-repetition or volatile categories achieve 5-15% hit rates. Vector databases must exclude the long tail because remote search costs (30ms) require 15--20% hit rates to break even, leaving 20-30% of production traffic uncached. Uniform cache policies compound this problem: fixed thresholds cause false positives in dense spaces and miss valid paraphrases in sparse spaces; fixed TTLs waste memory or serve stale data. This paper presents category-aware semantic caching where similarity thresholds, TTLs, and quotas vary by query category. We present a hybrid architecture separating in-memory HNSW search from external document storage, reducing miss cost from 30ms to 2ms. This reduction makes low-hit-rate categories economically viable (break-even at 3-5% versus 15-20%), enabling cache coverage across the entire workload distribution. Adaptive load-based policies extend this framework to respond to downstream model load, dynamically adjusting thresholds and TTLs to reduce traffic to overloaded models by 9-17% in theoretical projections.

Self-correction is particularly useful when a failure constrains the next repair. Coding agents benefit from this property because compilers, tests, and execution traces turn many failures into typed recovery signals, but broad language-agent tasks often expose only a coarse task failure. This creates a tension for generic recovery playbooks: they broaden the agent's context precisely when the system needs a narrower repair interface, mixing incompatible signals for invalid actions, missing procedures, and strict-format errors. Our insight is that development-set failures can recover part of the missing diagnostic substrate by deciding which recovery interventions are admissible before test-time correction. We propose DARC, a diagnosis-guided recovery harness that profiles task-family failure modes, prunes mismatched interventions from a shared recovery library, and freezes a verifier-selected success-cost policy for deployment. This causal order makes correction selective: the harness first determines what kind of failure can be repaired, then decides how much recovery evidence to spend. In ALFWorld, AppWorld, and XBRL Finance, the same protocol yields an action-validity harness, a procedural-recovery fallback, and a format-precision retrieval policy; in each evaluated setting it improves average task performance over base agents and broad playbooks while reducing environment steps or retrieval budget. Our experiments show that failures need not trigger uniformly more context: DARC turns self-correction from prompt expansion into recovery-interface design. DARC provides a practical route toward more reliable agents in domains where compiler-like feedback is absent: making failures actionable before making contexts larger.

As large language models (LLMs) are increasingly deployed with highly heterogeneous workloads, chunked-prefill execution has emerged as a mainstream serving architecture. Balancing scheduling fairness and latency stability in such environments is critical; otherwise, severe head-of-line blocking and request starvation will degrade user experience. However, existing systems rely on rigid First-Come, First-Served (FCFS) policies and static token budgets, leading to fairness degradation and unpredictable latency jitter. To address these issues, we propose a fairness-aware and latency-controllable scheduling framework for chunked-prefill LLM engines. Specifically, we design a lightweight aging-based scheduling policy that dynamically calculates priorities using accumulated waiting time and remaining prefill work. Furthermore, we develop Latency-Prediction-Based Request Scheduling (LPRS) and Active Prefill Control (APC) to replace static budgets with target-time constraints and actively regulate prefill concurrency. We evaluated our scheduling framework on NVIDIA GPUs and Ascend accelerators using real-world workloads. Results show the aging policy reduces mean end-to-end latency by over 10\% compared to FCFS. Moreover, LPRS and APC significantly reduce P99 tail latency and suppress prefill fragmentation, confirming that the structural prefill control and the temporal latency constraints are fundamentally complementary. All codes have been released in Github.

Diffusion and flow models generate a sample over iterative steps, each a full pass through a large network, and that pass dominates generation cost. Training-free caching accelerates them by reusing activations from recent evaluations instead of recomputing them. Dynamic caching methods decide when to refresh by accumulating a cheap probe of the network input into a staleness signal and spending a fresh evaluation once it crosses a threshold. They perform hard caching: the signal is a binary switch between refresh and reuse, and every step, fresh or cached, advances by the prescribed step size. We observe that the signal carries much more than this switch. How far it sits below the threshold, its headroom, predicts the error induced by reuse. We propose SoftCache, which performs soft caching: instead of a binary switch, the headroom sets how far each cached step goes. Where the headroom is large, the sampler jumps past several scheduled nodes, and as a refresh nears, its steps shrink back toward the original step. These adaptive jumps may land between the scheduled nodes, taking the sampler off its fixed grid. SoftCache requires no training and adds no per-backbone settings: on FLUX for images and on HunyuanVideo and Wan2.1 for video, at speedups from 3.5times to 6.9times, it is ahead of every baseline on all four fidelity metrics.

Large Language Models (LLMs) have transformed code auto-completion by generating context-aware suggestions. Yet, deciding when to present these suggestions remains underexplored, often leading to interruptions or wasted inference calls. We propose an adaptive timing mechanism that dynamically adjusts the delay before offering a suggestion based on real-time developer feedback. Our suggested method combines a logistic transform of recent acceptance rates with a bounded delay range, anchored by a high-level binary prediction of the developer's cognitive state. In a two-month deployment with professional developers, our system improved suggestion acceptance from 4.9% with no delay to 15.4% with static delays, and to 18.6% with adaptive timing-while reducing blind rejections (rejections without being read) from 8.3% to 0.36%. Together, these improvements increase acceptance and substantially reduce wasted inference calls by 75%, making LLM-based code assistants more efficient and cost-effective in practice.

Large language model (LLM) coding agents are increasingly deployed to autonomously perform software engineering tasks in terminal-based environments, making their reliability a growing concern. Existing empirical studies investigate why coding agents fail, yet they largely treat failure as a final outcome rather than a temporal process, providing limited insight into how failures emerge, evolve, and become unrecoverable. We present the first large-scale empirical study of CLI coding-agent failure trajectories, introducing a process-oriented framework that analyzes failure through its onset, evolution, and recovery across execution trajectories. We first collect 3,843 execution trajectories generated by seven frontier models across three coding-agent scaffolds (OpenHands, MiniSWE, and Terminus2) on Terminal-Bench, then carefully filter them to obtain 1,794 complete and valid trajectories for manual annotation (over 63,000 execution steps), from which we derive 14 findings spanning failure occurrence, root causes, recovery, and cross-system consistency. Our findings show that coding-agent failures are predominantly driven by epistemic errors, typically begin within the first few execution steps, and often remain hidden until recovery is no longer possible, suggesting that improving coding-agent reliability requires earlier validation and intervention rather than relying solely on final-outcome evaluation.

Real-world computer-use tasks often span multiple applications and devices, requiring agents to coordinate heterogeneous environments under dynamic runtime failures. Existing multi-device agent systems support task decomposition and cross-device assignment, but recovery remains largely coarse-grained: when execution fails, they typically retry the same strategy, reassign the subtask, or revise the global plan, without systematically modeling the device-local strategy space. This limits their ability to distinguish failures that can be repaired within the current device from those that require cross-device replanning. We propose H-RePlan, a hierarchical replanning framework for multi-device agents with unified API--CLI--GUI execution. H-RePlan equips each device with interchangeable execution strategies and separates device-local strategy recovery from orchestrator-level global replanning through a compact cross-layer failure abstraction. To evaluate this capability, we introduce HeraBench, a fault-injected benchmark that constructs cross-device workflows over Linux and Android devices and injects strategy- and device-level failures. Experiments show that H-RePlan substantially outperforms single-strategy and coarse-grained multi-device baselines, achieving higher completion, instruction adherence, and perfect-pass rates while reducing the token cost required for reliable end-to-end success. These results demonstrate that scope-aware hierarchical recovery is essential for robust multi-device agent execution.

Training large-scale language models is increasingly critical in various domains, but it is hindered by frequent failures, leading to significant time and economic costs. Current failure recovery methods in cloud-based settings inadequately address the diverse and complex scenarios that arise, focusing narrowly on erasing downtime for individual tasks without considering the overall cost impact on a cluster. We introduce Unicron, a workload manager designed for efficient self-healing in large-scale language model training. Unicron optimizes the training process by minimizing failure-related costs across multiple concurrent tasks within a cluster. Its key features include in-band error detection for real-time error identification without extra overhead, a dynamic cost-aware plan generation mechanism for optimal reconfiguration, and an efficient transition strategy to reduce downtime during state changes. Deployed on a 128-GPU distributed cluster, Unicron demonstrates up to a 1.9x improvement in training efficiency over state-of-the-art methods, significantly reducing failure recovery costs and enhancing the reliability of large-scale language model training.

Coding agents are a fast-growing LLM application, executing as long-running closed-loop sessions in which LLM generations alternate with external tool calls. Yet, unlike chat workloads, their serving behavior has not been studied extensively. We address this gap by collecting a dataset of real-world coding assistant traces. Our analysis shows that coding agent sessions repeatedly reuse large prefixes and create sustained KVCache pressure that conventional LLM serving policies handle poorly. Based on our analysis, we present CacheWise, a KVCache management layer that improves KVCache reuse for coding agent workloads. CacheWise combines prefix-aware scheduling with reuse-aware eviction guided by lightweight predictions from tool call metadata. Implemented in vLLM and evaluated on the collected traces, CacheWise reduces KVCache evictions by up to 2-2.6x and improves total agent session completion time by up to 3.5x.

Autonomous research systems increasingly make the scientific workflow executable: agents can propose ideas, run code, inspect results, and draft papers. But executable workflows do not by themselves produce research judgment. We analyze where current systems lose trial experience: weak evidence becomes prose, pilot signals become broad claims, memory remains textual, and recurring process failures do not change later behavior. We introduce Sibyl-AutoResearch, a self-evolving AutoResearch framework built around Scientific Trial-and-Error Harnesses. A harness lets agents run bounded trials, preserve positive and negative outcomes, and route lessons into later planning, validation, claim scope, scheduling, critique, writing, and harness repair. We formalize this through two auditable conversion units: trial-to-behavior conversion, which links trial signals to later research actions, and trial-to-harness-behavior conversion, which links recurring process failures to system updates. We implement the framework in SIBYL, a file-backed autonomous research system that exposes the state, roles, memory, gates, and artifact traces needed to inspect these conversion paths. A retrospective audit identifies eight high-confidence conversion events, with a median latency of one iteration and a maximum latency of three iterations. A recovered-failure registry further shows how five naturally occurring failure classes, including duplicate results, stale numbers, and unsupported statistics, were blocked, downgraded, or routed into later repair. These traces do not establish a comparative performance claim; they show that the proposed conversion units are recoverable from realistic autonomous-research workspaces. The SIBYL framework and system are available at https://github.com/Sibyl-Research-Team/AutoResearch-SibylSystem.

Major open-source serving stacks reuse the key-value tensors of a shared prefix by default. We measure what this prefix reuse costs in reproducibility. Holding model, decoding, seed and request order fixed at batch size one, we ran an eighty-episode multi-turn agentic tool-use workload with prefix reuse on and off across two engines and four weight formats. Without prefix reuse, repeated runs reproduced every token and log-probability in all ten configurations. With it, cache-hit and recompute paths diverged on both engines. On llama.cpp with GGUF weights this path divergence rises with quantization: for Qwen2.5-7B over ten independent server histories, it reached 37.4 percent of episodes at 16-bit and 82.5 percent at four-bit. Near-tie decisions became only about 1.2 times as common, while the cache-path change in top-two margins grew 4.9-fold from 16-bit to three-bit. Serving four-bit weights through 16-bit kernels left divergence not detectably different from 16-bit, placing the amplification mainly in the quantized execution path. At Q4_K_M, run-to-run divergence came mainly from llama.cpp's server-level prompt cache: under the canonical episode order it moved divergence by 37.5 points, and at its default, divergence spanned 20.0 to 28.7 percent under five random orders. With cache state restored, each path reproduced exactly while the two still differed. In the tested stacks, cached serving is irreproducible because the cache state is absent from the request and not reset by default. A single-turn bridge shows path divergence reaching task outcomes with no detectable net change in accuracy. We release the harness, logs, and analysis pipeline.

Large Language Models (LLMs) exhibit remarkable code generation capabilities but falter when adapting to frequent updates in external library APIs. This critical limitation, stemming from reliance on outdated API knowledge from their training data, even with access to current documentation, impedes reliable code generation in dynamic environments. To tackle this issue, we propose ReCode (rule-based Reinforcement learning for Code Update), a novel framework that mimics human programmer adaptation to API changes. Specifically, we construct a dataset of approximately 2,000 data entries to train the LLMs to perform version migration based on updated information. Then, we introduce a modified string similarity metric for code evaluation as the reward for reinforcement learning. Our experiments demonstrate that ReCode substantially boosts LLMs' code generation performance in dynamic API scenarios, especially on the unseen CodeUpdateArena task. Crucially, compared to supervised fine-tuning, ReCode has less impact on LLMs' general code generation abilities. We apply ReCode on various LLMs and reinforcement learning algorithms (GRPO and DAPO), all achieving consistent improvements. Notably, after training, Qwen2.5-Coder-7B outperforms that of the 32B parameter code instruction-tuned model and the reasoning model with the same architecture. Code is available at https://github.com/zjunlp/ReCode.

Inference serving for large language models (LLMs) is the key to unleashing their potential in people's daily lives. However, efficient LLM serving remains challenging today because the requests are inherently heterogeneous and unpredictable in terms of resource and latency requirements, as a result of the diverse applications and the dynamic execution nature of LLMs. Existing systems are fundamentally limited in handling these characteristics and cause problems such as severe queuing delays, poor tail latencies, and SLO violations. We introduce Llumnix, an LLM serving system that reacts to such heterogeneous and unpredictable requests by runtime rescheduling across multiple model instances. Similar to context switching across CPU cores in modern operating systems, Llumnix reschedules requests to improve load balancing and isolation, mitigate resource fragmentation, and differentiate request priorities and SLOs. Llumnix implements the rescheduling with an efficient and scalable live migration mechanism for requests and their in-memory states, and exploits it in a dynamic scheduling policy that unifies the multiple rescheduling scenarios elegantly. Our evaluations show that Llumnix improves tail latencies by an order of magnitude, accelerates high-priority requests by up to 1.5x, and delivers up to 36% cost savings while achieving similar tail latencies, compared against state-of-the-art LLM serving systems. Llumnix is publicly available at https://github.com/AlibabaPAI/llumnix.

Diffusion models suffer from substantial computational overhead due to their inherently iterative inference process. While feature caching offers a promising acceleration strategy by reusing intermediate outputs across timesteps, naive reuse often incurs noticeable quality degradation. In this work, we formally analyze the cumulative error introduced by caching and decompose it into two principal components: feature shift error, caused by inaccuracies in cached outputs, and step amplification error, which arises from error propagation under fixed timestep schedules. To address these issues, we propose ERTACache, a principled caching framework that jointly rectifies both error types. Our method employs an offline residual profiling stage to identify reusable steps, dynamically adjusts integration intervals via a trajectory-aware correction coefficient, and analytically approximates cache-induced errors through a closed-form residual linearization model. Together, these components enable accurate and efficient sampling under aggressive cache reuse. Extensive experiments across standard image and video generation benchmarks show that ERTACache achieves up to 2x inference speedup while consistently preserving or even improving visual quality. Notably, on the state-of-the-art Wan2.1 video diffusion model, ERTACache delivers 2x acceleration with minimal VBench degradation, effectively maintaining baseline fidelity while significantly improving efficiency. The code is available at https://github.com/bytedance/ERTACache.

Mixture-of-Experts (MoE) models challenge serving infrastructures with dynamic, sparse expert utilization, causing instability on conventional systems designed for dense architectures. We propose EaaS, a novel serving system to enable efficient, scalable, and robust MoE deployment. Our system disaggregates MoE modules into independent, stateless services. This design enables fine-grained resource scaling and provides inherent fault tolerance by decoupling compute units. The architecture is powered by a high-performance, CPU-free peer-to-peer communication library that ensures minimal overhead and high throughput. Experiments confirm EaaS's scalability and efficiency, achieving performance comparable to monolithic systems while providing robust fault tolerance and strong scalability. EaaS incurs less than a 2% throughput reduction under simulated hardware failures that would otherwise halt monolithic architectures. It further saves up to 37.5% of computing resources through dynamic fine-grained adaptation to serving traffic, demonstrating strong resilience for large-scale MoE deployment in production.

Large language model (LLM) agents have demonstrated strong capabilities in automating complex information-seeking and transactional tasks across the open web. However, their real-world reliability remains limited by access barriers, such as dead links, authentication walls, rate limits, and anti-scraping defenses. These barriers block the primary execution path, causing agents to abort prematurely, loop indefinitely, or quietly compromise the user's original constraints. Existing evaluations either implicitly assume that target resources are freely accessible or focus on transient perturbations that simple retries can resolve, failing to capture scenarios where agents must actively reroute around impassable bottlenecks. To bridge this gap, this paper introduces AgentHeal, a comprehensive benchmark evaluating goal-preserving resource recovery, defined as the ability of web agents to detect non-transient access barriers, pivot to legitimate alternative sources, and fulfill the user's exact original objective. Spanning nine barrier families across a counterfactual sandbox and real-website replay, our experiments on leading LLM backbones show that average task success drops sharply from 89.4% to 43.7% under access barriers. Further analysis reveals that agents frequently fall for deceptive look-alikes, fail to escalate to users when necessary, violate access policies, or waste computation on futile retries, providing actionable diagnostics for developing resilient web agents.

Context retrieval systems for LLM inference face a critical challenge: high retrieval latency creates a fundamental tension between waiting for complete context (poor time-to-first-token) and proceeding without it (reduced quality). Streaming context incrementally--overlapping retrieval with inference--can mitigate this latency, but doing so with concurrent requests introduces new challenges: requests contend for GPU compute and memory, and scheduling must adapt to dynamic context arrivals. We present Stream2LLM, a streaming-aware LLM serving system for concurrent prefill-decode disaggregated deployments. Stream2LLM introduces adaptive scheduling and preemption for two distinct retrieval patterns: append-mode (progressive context accumulation) and update-mode (iterative refinement with cache invalidation). It decouples scheduling decisions from resource acquisition, enabling flexible preemption strategies guided by hardware-specific cost models, and uses longest common prefix matching to minimize redundant computation when input changes dynamically. To evaluate Stream2LLM, we collect two large-scale, real-world streaming workloads based on web crawling and approximate nearest neighbor search. Our evaluation demonstrates that streaming architecture delivers up to 11x TTFT improvements, with cost-aware scheduling providing critical benefits under memory pressure, all while maintaining throughput parity with non-streaming baselines. Code: https://github.com/rajveerb/stream2llm/tree/mlsys_artifact

Root cause analysis (RCA) for microservice systems has gained significant attention in recent years. However, there is still no standard benchmark that includes large-scale datasets and supports comprehensive evaluation environments. In this paper, we introduce RCAEval, an open-source benchmark that provides datasets and an evaluation environment for RCA in microservice systems. First, we introduce three comprehensive datasets comprising 735 failure cases collected from three microservice systems, covering various fault types observed in real-world failures. Second, we present a comprehensive evaluation framework that includes fifteen reproducible baselines covering a wide range of RCA approaches, with the ability to evaluate both coarse-grained and fine-grained RCA. We hope that this ready-to-use benchmark will enable researchers and practitioners to conduct extensive analysis and pave the way for robust new solutions for RCA of microservice systems.

Not a day goes by without hearing about the impressive feats of large language models (LLMs), and equally, not a day passes without hearing about their challenges. LLMs are notoriously vulnerable to biases in their dataset, leading to issues such as toxicity. While domain-adaptive training has been employed to mitigate these issues, these techniques often address all model parameters indiscriminately during the repair process, resulting in poor repair quality and reduced model versatility. In this paper, we introduce a novel dynamic slicing-based intent-aware LLM repair strategy, IRepair. This approach selectively targets the most error-prone sections of the model for repair. Specifically, we propose dynamically slicing the model's most sensitive layers that require immediate attention, concentrating repair efforts on those areas. This method enables more effective repairs with potentially less impact on the model's overall performance by altering a smaller portion of the model. We evaluated our technique on three models from the GPT2 and GPT-Neo families, with parameters ranging from 800M to 1.6B, in a toxicity mitigation setup. Our results show that IRepair repairs errors 43.6% more effectively while causing 46% less disruption to general performance compared to the closest baseline, direct preference optimization. Our empirical analysis also reveals that errors are more concentrated in a smaller section of the model, with the top 20% of layers exhibiting 773% more error density than the remaining 80\%. This highlights the need for selective repair. Additionally, we demonstrate that a dynamic selection approach is essential for addressing errors dispersed throughout the model, ensuring a robust and efficient repair.

Large Language Model (LLM) agents rely on external tools to perform multistage tasks. Existing agent frameworks typically assume that tool calls are atomic and return binary success or failure signals. However, real-world systems exhibit non-atomic behaviors such as timeouts after dispatch, delayed visibility, and partial state updates. These mismatches lead to reliability issues including duplicate actions, task success, and unnecessary tool executions. A lightweight, verification-aware tool wrapper is introduced that augments tool calls with postcondition verification, verify-before-retry logic, and idempotency keys. The approach is evaluated in a controlled simulated environment with injected non-atomic failures across multiple task templates. The results demonstrate that the proposed method significantly reduces duplicate actions, while maintaining comparable task success rates. Overall, the findings suggest that strengthening tool interaction semantics is a promising direction for improving LLM agent reliability without requiring modifications to the underlying language model.

LLM agents increasingly rely on retrieval buffers to store and reuse past experience, yet the cache management policies governing these buffers remain largely ad-hoc. We formalize this as an online semantic cache replacement problem with switching costs, where items are matched by embedding similarity and hit quality is continuous rather than binary. Through experiments on two datasets from MemoryBench-Full (LoCoMo, DialSim) with 8 replacement policies, we reveal a surprising finding: classic heuristics (LRU, LFU) consistently underperform the naive FIFO baseline on semantic workloads, due to the absence of temporal locality and frequency concentration. We propose SOLAR, a learning-augmented framework that derives modification timing from regret accumulation (achieving sim17\% modification rate) and content selection from Bayesian online learning over implicit retrieval feedback. We prove SOLAR achieves a constant competitive ratio leq 3, independent of cache size and horizon (vs.\ Ω(K) for FIFO), and eviction regret O(KTlog T), matching the Ω(KT) lower bound up to logarithmic factors. Experiments demonstrate 5--75\% relative improvement over FIFO at tight cache sizes, with a clearly characterized phase transition at the working set boundary. Synthetic experiments with 5000-item pools further reveal an inverted-U relationship between pool size and retrieval quality, justifying capacity constraints as a retrieval noise phenomenon rather than a storage limitation.

Current work on robot failure detection and correction typically operates in a post hoc manner, analyzing errors and applying corrections only after failures occur. This work introduces CycleVLA, a system that equips Vision-Language-Action models (VLAs) with proactive self-correction, the capability to anticipate incipient failures and recover before they fully manifest during execution. CycleVLA achieves this by integrating a progress-aware VLA that flags critical subtask transition points where failures most frequently occur, a VLM-based failure predictor and planner that triggers subtask backtracking upon predicted failure, and a test-time scaling strategy based on Minimum Bayes Risk (MBR) decoding to improve retry success after backtracking. Extensive experiments on the LIBERO and LIBERO-Plus simulation benchmarks show that CycleVLA surpasses the state-of-the-art VLA π0.5, improves success rates by correcting execution failures across VLAs of varying capability, from under-trained ones to fully converged policies, and that MBR serves as an effective zero-shot test-time scaling strategy for VLAs. On a real robot, CycleVLA reaches a 91% average success rate on one precise and two long-horizon manipulation tasks. We further conduct stress tests with multiple manually injected perturbations (e.g., swapping in a distractor at the expected location while relocating the true target object mid-execution), where CycleVLA corrects ~80% of injected failures and maintains success rates comparable to unperturbed execution. Project Page: https://dannymcy.github.io/cyclevla/

Two widely adopted techniques for LLM inference serving systems today are hybrid batching and disaggregated serving. A hybrid batch combines prefill and decode tokens of different requests in the same batch to improve resource utilization and throughput at the cost of increased latency per token. In contrast, disaggregated serving decouples compute-bound prefill and bandwidth-bound decode phases to optimize for service level objectives (SLOs) at the cost of resource under-utilization and KV-cache transfer overheads. To address the limitations of these techniques, we propose RAPID-Serve: a technique to concurrently execute prefill and decode on the same GPU(s) to meet latency SLOs while maintaining high throughput and efficient resource utilization. Furthermore, we propose Adaptive Resource Management for runtime compute resource allocation, optionally leveraging CU masking (a fine-grained Compute Unit partitioning feature on AMD InstinctTM GPUs). RAPID-Serve provides up to 4.1x (average 1.7x) unconstrained throughput improvement and 32x and higher (average 4.9x) throughput improvement under SLO constraints, showing it as an effective strategy compared to the state-of-the-art approaches, particularly in resource-constrained environments.

We formulate the predicted-updates dynamic model, one of the first beyond-worst-case models for dynamic algorithms, which generalizes a large set of well-studied dynamic models including the offline dynamic, incremental, and decremental models to the fully dynamic setting when given predictions about the update times of the elements. In the most basic form of our model, we receive a set of predicted update times for all of the updates that occur over the event horizon. We give a novel framework that "lifts" offline divide-and-conquer algorithms into the fully dynamic setting with little overhead. Using this, we are able to interpolate between the offline and fully dynamic settings; when the ell_1 error of the prediction is linear in the number of updates, we achieve the offline runtime of the algorithm (up to poly log n factors). Provided a fully dynamic backstop algorithm, our algorithm will never do worse than the backstop algorithm regardless of the prediction error. Furthermore, our framework achieves a smooth linear trade-off between ell_1 error in the predictions and runtime. These correspond to the desiderata of consistency, robustness, and graceful degradation of the algorithms-with-predictions literature. We further extend our techniques to incremental and decremental settings, transforming algorithms in these settings when given predictions of only the deletion and insertion times, respectively. Our framework is general, and we apply it to obtain improved efficiency bounds over the state-of-the-art dynamic algorithms for a variety of problems including triconnectivity, planar digraph all pairs shortest paths, k-edge connectivity, and others, for prediction error of reasonable magnitude.

Text-to-SQL has recently achieved impressive progress, yet remains difficult to apply effectively in real-world scenarios. This gap stems from the reliance on single static workflows, fundamentally limiting scalability to out-of-distribution and long-tail scenarios. Instead of requiring users to select suitable methods through extensive experimentation, we attempt to enable systems to adaptively construct workflows at inference time. Through theoretical and empirical analysis, we demonstrate that optimal dynamic policies consistently outperform the best static workflow, with performance gains fundamentally driven by heterogeneity across candidate workflows. Motivated by this, we propose SquRL, a reinforcement learning framework that enhances LLMs' reasoning capability in adaptive workflow construction. We design a rule-based reward function and introduce two effective training mechanisms: dynamic actor masking to encourage broader exploration, and pseudo rewards to improve training efficiency. Experiments on widely-used Text-to-SQL benchmarks demonstrate that dynamic workflow construction consistently outperforms the best static workflow methods, with especially pronounced gains on complex and out-of-distribution queries. The codes are available at https://github.com/Satissss/SquRL

Long-running LLM applications repeatedly send growing context, making prefix caching critical for reducing prefill cost. Yet prefix-cache behavior under agentic workloads remains poorly understood. We study production traces from two companies and evaluate 14 eviction algorithms across HBM-constrained and large memory-pool settings. Despite a large gap to Belady, sophisticated policies designed for traditional caches provide little benefit over LRU. The reason is structural: prefix reuse is dominated by the regular pacing of active sessions, making recency unusually predictive. Prefix caching nevertheless introduces new challenges, including heavy-tailed session footprints and highly variable miss costs as attention computation grows with sequence length. We introduce the compute-savings ratio and two offline oracles to quantify these effects. Our results show that effective prefix-cache management should retain recency as its foundation while selectively adding quick demotion for one-hit prefixes, compute-aware partial eviction for expensive misses, and capacity-dependent eviction granularity. We will release the traces and simulator to support future research.

Batch inference for agentic workloads stresses the GPU key-value (KV) cache in a sustained and cumulative manner, often causing severe throughput degradation well before memory capacity is exhausted. We identify this phenomenon as middle-phase thrashing, a previously under-characterized pathology in which cache efficiency collapses as long-lived agents accumulate state over time. We argue that mitigating this pathology requires moving beyond reactive, request-level cache management to proactive, agent-level admission control. Drawing inspiration from congestion control in distributed systems, we view the KV cache as a shared resource whose efficient utilization depends on feedback-driven regulation. Based on this insight, we present CONCUR, a lightweight control layer that regulates agent admission to bound aggregate cache pressure while preserving execution continuity. CONCUR adapts a cache-aware control algorithm to dynamically adjust the number of active agents using runtime cache signals. Across large models and real-world agent workloads, CONCUR prevents middle-phase thrashing and improves batch inference throughput by up to 4.09x on Qwen3-32B and 1.9x on DeepSeek-V3, while remaining compatible with existing LLM serving systems.

Diffusion language models enable parallel token generation through block-wise decoding, but their irreversible commitments can lead to stagnation, where the reverse diffusion process fails to make further progress under a suboptimal context.We propose Reversible Diffusion Decoding (RDD), a decoding framework that introduces reversibility into block-wise diffusion generation. RDD detects stagnation as a state-dependent failure of the reverse process and enables efficient backtracking to earlier blocks without recomputation via cached model states. To avoid repeated failure trajectories, RDD applies confidence-guided re-masking to selectively reinitialize uncertain tokens while preserving reliable context.This reversible formulation allows decoding to recover from early commitment errors while maintaining the parallel efficiency of diffusion-based generation. Experiments show that RDD improves generation robustness and quality over baselines with minimal computational overhead.

Tool-using LLM agents face a reliability-cost tradeoff: routing every decision through the LLM improves correctness but incurs high latency and inference cost, while pre-coded workflow graphs reduce cost but become brittle under unanticipated compound tool failures. We present Self-Healing Router, a fault-tolerant orchestration architecture that treats most agent control-flow decisions as routing rather than reasoning. The system combines (i) parallel health monitors that assign priority scores to runtime conditions such as tool outages and risk signals, and (ii) a cost-weighted tool graph where Dijkstra's algorithm performs deterministic shortest-path routing. When a tool fails mid-execution, its edges are reweighted to infinity and the path is recomputed -- yielding automatic recovery without invoking the LLM. The LLM is reserved exclusively for cases where no feasible path exists, enabling goal demotion or escalation. Prior graph-based tool-use systems (ControlLLM, ToolNet, NaviAgent) focus on tool selection and planning; our contribution is runtime fault tolerance with deterministic recovery and binary observability -- every failure is either a logged reroute or an explicit escalation, never a silent skip. Across 19 scenarios spanning three graph topologies (linear pipeline, dependency DAG, parallel fan-out), Self-Healing Router matches ReAct's correctness while reducing control-plane LLM calls by 93% (9 vs 123 aggregate) and eliminating the silent-failure cases observed in a well-engineered static workflow baseline under compound failures.

Extensive system scales (i.e. thousands of GPU/TPUs) and prolonged training periods (i.e. months of pretraining) significantly escalate the probability of failures when training large language models (LLMs). Thus, efficient and reliable fault-tolerance methods are in urgent need. Checkpointing is the primary fault-tolerance method to periodically save parameter snapshots from GPU memory to disks via CPU memory. In this paper, we identify the frequency of existing checkpoint-based fault-tolerance being significantly limited by the storage I/O overheads, which results in hefty re-training costs on restarting from the nearest checkpoint. In response to this gap, we introduce an in-memory fault-tolerance framework for large-scale LLM pretraining. The framework boosts the efficiency and reliability of fault tolerance from three aspects: (1) Reduced Data Transfer and I/O: By asynchronously caching parameters, i.e., sharded model parameters, optimizer states, and RNG states, to CPU volatile memory, Our framework significantly reduces communication costs and bypasses checkpoint I/O. (2) Enhanced System Reliability: Our framework enhances parameter protection with a two-layer hierarchy: snapshot management processes (SMPs) safeguard against software failures, together with Erasure Coding (EC) protecting against node failures. This double-layered protection greatly improves the survival probability of the parameters compared to existing checkpointing methods. (3) Improved Snapshotting Frequency: Our framework achieves more frequent snapshotting compared with asynchronous checkpointing optimizations under the same saving time budget, which improves the fault tolerance efficiency. Empirical results demonstrate that Our framework minimizes the overhead of fault tolerance of LLM pretraining by effectively leveraging redundant CPU resources.

Large language model (LLM) serving has transformed from stateless to stateful systems, utilizing techniques like context caching and disaggregated inference. These optimizations extend the lifespan and domain of the KV cache, necessitating a new architectural approach. We present MemServe, a unified system that integrates both inter-request and intra-request optimizations. MemServe introduces MemPool, an elastic memory pool managing distributed memory and KV caches across serving instances. Using MemPool APIs, MemServe combines context caching with disaggregated inference for the first time, supported by a global scheduler that enhances cache reuse through a global prompt tree-based locality-aware policy. Tests show that MemServe significantly improves job completion time and time-to-first-time.

As modern microservice systems grow increasingly popular and complex-often consisting of hundreds or even thousands of fine-grained, interdependent components-they are becoming more susceptible to frequent and subtle failures. Ensuring system reliability therefore hinges on accurate and efficient failure localization. Traditional failure localization approaches based on small models lack the flexibility to adapt to diverse failure scenarios, while recent LLM-based methods suffer from two major limitations: they often rely on rigid invocation workflows that constrain the model's ability to dynamically explore optimal localization paths, and they require resource-intensive inference, making them cost-prohibitive for real-world deployment. To address these challenges, we explore the use of reinforcement fine-tuning to equip lightweight LLMs with reasoning and self-refinement capabilities, significantly improving the cost-effectiveness and adaptability of LLM-based failure localization. We begin with an empirical study to identify three key capabilities essential for accurate localization. Building on these insights, we propose a progressive multi-stage GRPO fine-tuning framework, which integrates a multi-factor failure localization grader and a recursion-of-thought actor module. The resulting model, ThinkFL, not only outperforms existing state-of-the-art LLMs and baseline methods in localization accuracy but also reduces end-to-end localization latency from minutes to seconds, demonstrating strong potential for real-world applications.

LLM agents are rapidly evolving from coding assistants into autonomous software engineering systems. However, existing evaluation methodologies remain largely centered on static, isolated, and short-horizon benchmarks that fail to capture the dynamic complexity of real-world production workflows. As a result, benchmark performance may poorly reflect practical capability under realistic runtime environments involving long execution chains, tool interactions, dependency management, and iterative feedback loops. We thus present RAMP, a production-grounded infrastructure for assessing long-horizon software engineering agents. Built upon the YatCC integrated platform, RAMP provides a unified runtime assessment architecture through standardized orchestration and execution interfaces. RAMP introduces realistic compiler-construction workloads with serial dependencies and complex toolchain interactions, together with a staged recovery mechanism for analyzing execution behavior under partial workflow failure. The framework further incorporates utility-oriented multi-dimensional metrics that jointly evaluate outcome quality and process efficiency. We conduct runtime assessments across 15 mainstream models and observe substantial capability degradation that remains largely invisible to conventional isolated benchmarks. Task completion rates progressively collapse across serial workflows, dropping from 100% in the initial stage to only 20% in the final stage, while none of the evaluated models successfully completes the entire pipeline. Runtime analysis reveals systematic failure propagation and significant resource inefficiencies, with computational costs differing by up to three orders of magnitude among comparable models. These findings suggest RAMP advances agentic model evaluation toward continuous, runtime-observable, and production-grounded assessment.

Agentic LLM coding tools compress long session histories into compaction summaries that subsequent sessions inherit as ground truth. This paper documents a failure mode in Claude Code where partial standard output from timed-out commands (exit code 143) is recorded in compaction summaries as confirmed results, propagating false positives across sessions and model versions without re-verification. The underlying mechanism is a conflation of observation and persistence, where information that appeared in the terminal is treated as equivalent to information written to durable storage. This finding extends the analysis of LLM self-evaluation failures reported in prior work on non-determinism in LLM-as-judge grading by showing that agentic tools exhibit analogous reliability deficits when reporting on their own operational outcomes. The failure has direct implications for any workflow that relies on agentic session continuity for data processing, scientific computation, or multi-step automation.

Fine-grained Mixture-of-Experts (MoE) models sparsely activate only a subset of experts per token, reducing activated computation while maintaining high model capacity. However, in memory-constrained inference scenarios, only a small set of experts can be cached. Experts not in the cache must be fetched from slow external storage (e.g., UFS), leading to frequent evictions and substantial I/O overhead. We propose ReMoE, a router fine-tuning framework designed to boost token-wise expert reuse. ReMoE biases the router toward recently selected experts, producing temporally stable routing that better matches cache locality constraints. By increasing short-horizon expert reuse, ReMoE reduces expert fetches from storage without adding inference-time computation. Experiments on DeepSeek and Qwen models show that ReMoE improves expert reuse by 26% while maintaining downstream task performance. Real-system evaluations further confirm these benefits, improving output throughput by 8.4% under vLLM GPU-CPU expert offloading and reducing TPOT by 43.6-49.8% under llama.cpp on Jetson Orin NX, corresponding to a 1.77-1.99times decode speedup across diverse workloads. Checkpoints and usage instructions are available at https://github.com/BUAA-OSCAR/ReMoE.

Large language models rely on KV caching to reduce repeated prefill computation in long context and interactive applications. As lightweight adapters evolve, cached states reflect earlier versions, so stale reuse distorts current model outputs, while complete affected suffix recomputation restores fidelity at substantial cost. We seek minimal recomputation that recovers current adapter behavior. Existing systems track token, context, or stable adapter identity, but neither represent caches from earlier adapter versions nor distinguish update propagation from the recomputation required for behavioral recovery. To address these gaps, we introduce CacheReforge, which represents stale KV caches as layerwise mixed-version objects. It combines per-layer adapter anchors, calibrated sensitivity, accumulated drift, and executable restart boundaries to select direct reuse, bounded recomputation, or complete affected-suffix recovery. We distinguish dependency depth from the functional recomputation horizon and use cumulative tail influence to characterize when bounded recovery preserves current-model behavior. We evaluate CacheReforge on Qwen2.5-1.5B and Qwen2.5-7B with continual LoRA updates, including 16K HotpotQA and 2WikiMQA workloads. CacheReforge reduces mean KL divergence by 92.4% relative to stale reuse, while recomputing only 5.44% of layers and reducing cache-maintenance time by 93.2% relative to fresh full prefill. These results show that version-aware recovery preserves model fidelity and most KV caching gains.

Large language models are increasingly deployed as agents that solve tasks by interacting with external tool environments. Although recent tool-use benchmarks increasingly cover complex task settings, they still largely assume clean, stable, and trustworthy tool environments, leaving tool-environment unreliability insufficiently examined. We introduce ToolBench-X, a benchmark for evaluating agents under recoverable reliability hazards. ToolBench-X contains executable multi-step tasks across diverse domains and sequential, parallel, and mixed workflows, each paired with deterministic tools and a canonical final answer for automatic evaluation. Starting from clean tool environments, ToolBench-X injects five structured hazard types: Specification Drift, Invocation Error, Execution Failure, Output Drift, and Cross-source Conflict. Crucially, each injected instance remains solvable through at least one valid recovery path, such as retrying, fallback, verification, or cross-checking. Experiments reveal a substantial reliability gap: agents that perform well with reliable tools often fail under recoverable hazards. Further analysis shows that failures are driven less by tool-use volume or inference budget than by limited hazard diagnosis and ineffective recovery. Targeted recovery hints recover many failed tasks, while test-time scaling yields more limited gains. These results suggest that tool-use evaluation should move beyond function-call accuracy toward task completion under unreliable tool environments. The code and data is available at https://github.com/Foreverskyou/ToolBench-X.

While cloud-native microservice architectures have revolutionized software development, their inherent operational complexity makes failure Root Cause Analysis (RCA) a critical yet challenging task. Numerous data-driven RCA models have been proposed to address this challenge. However, we find that the benchmarks used to evaluate these models are often too simple to reflect real-world scenarios. Our preliminary study reveals that simple rule-based methods can achieve performance comparable to or even surpassing state-of-the-art (SOTA) models on four widely used public benchmarks. This finding suggests that the oversimplification of existing benchmarks might lead to an overestimation of the performance of RCA methods. To further investigate the oversimplification issue, we conduct a systematic analysis of popular public RCA benchmarks, identifying key limitations in their fault injection strategies, call graph structures, and telemetry signal patterns. Based on these insights, we propose an automated framework for generating more challenging and comprehensive benchmarks that include complex fault propagation scenarios. Our new dataset contains 1,430 validated failure cases from 9,152 fault injections, covering 25 fault types across 6 categories, dynamic workloads, and hierarchical ground-truth labels that map failures from services down to code-level causes. Crucially, to ensure the failure cases are relevant to IT operations, each case is validated to have a discernible impact on user-facing SLIs. Our re-evaluation of 11 SOTA models on this new benchmark shows that they achieve low Top@1 accuracies, averaging 0.21, with the best-performing model reaching merely 0.37, and execution times escalating from seconds to hours.

GUI agents accumulate high-resolution screenshots as the trajectory unfolds, increasing inference latency and memory usage. Training-free visual token pruning can reduce this cost, but cache reuse introduces a fundamental constraint. Once tokens are discarded, the corresponding visual evidence cannot be recovered without re-encoding. Pruning therefore becomes an irreversible admission decision that must remain useful for unknown future targets while preserving coverage of operable regions under tight budgets. To address these challenges, we propose \method{}, a training-free framework for \textbf{Trajectory-robust Admission and Coverage-aware Evidence ordering}. Specifically, we combine a query-independent layout-derived interaction prior with instruction relevance and feature novelty to rank visual evidence according to both potential future utility and diversity. Then, we reserve part of the budget for native visual tokens distributed across the screen, repairing missing spatial coverage without breaking the ordering. Together, these mechanisms produce a nested token order, allowing retained visual evidence to shrink monotonically across budgets while remaining reusable throughout the trajectory. Finally, our monotone KV contraction incrementally contracts retired frames into compact session state, avoiding repeated visual encoding or pruning. Extensive experiments across six GUI benchmarks and diverse models verify the effectiveness of our proposed under tight budgets. The source code will be released.

Long-horizon LLM agents act on an append-only interaction history that is re-sent to the model at every step, so the context and its cost grow with steps until the sessions exceed the context window. Existing methods manage the context through context requirement prediction, relying on additional model calls, heuristic rules, or trained policies. However, these predictive approaches introduce runtime overhead, invalidate prefix caches, and permanently discard content with no guarantee of recovery. To overcome these limitations, we introduce ReFold: a training-free rendering layer that preserves the underlying interaction history while compressing only the model's rendered context. It removes two kinds of inter-turn redundancy without an auxiliary predictor: content an earlier turn already displayed, replaced by a stub, and turns the agent itself reports finished, folded into a one-line note. Both operators use chunked rendering, rewriting the cached prefix once every few steps rather than at every step. Every removal is strictly reversible, a wrong removal costs one restore from the history rather than permanent content loss. Because it operates at the rendering layer, ReFold is plug-and-play across standard ReAct-style harnesses. Evaluations across five long-horizon benchmarks and two frontier LLMs demonstrate that ReFold reduces token consumption by up to 2.5x and halves the KV-cache memory per session without degrading task success rates. Under capped context budgets, it avoids up to 92% of forced compactions. Under concurrent serving workloads, it reduces request queuing delays by up to 100%, accelerating inference by up to 1.7x, while cutting inference costs by up to 3.4x.

Conversational memory changes during use, so endpoint question answering alone cannot establish how a persistent state accumulates, ages, or incorporates revisions. We introduce LSREP, a Longitudinal State-Replay Evaluation Protocol combining ordered replay, explicit lifecycle schedules, repeated probes, evolving reference answers, and mechanism-fidelity checks. Its architectural case study is ICE v2, a local-first memory middleware with typed stores, retrieval fusion, and dynamic context budgets. The private, single-user instantiation contains 1,985 turns, 219 distinct probes, and 1,211 probe-checkpoint observations across 52 checkpoints. On three ordinary-density datasets, ICE v2 has a near-zero mean quality difference from vector-RAG while selecting 32% fewer fragments but using 6.6% more estimated prompt tokens. A fourth, dense dataset exposes catastrophic failures of the unbudgeted baseline. The fidelity audit limits attribution: procedural retrieval is defective, several mechanisms are unexercised, and graph utility is not established. In a complementary matched public diagnostic, ICE v2 loses decisively to pure vector-RAG on LongMemEval: 50.8% versus 72.8% in the evidence-only oracle and 43.0% versus 69.5% in full-S. Paired differences are -22.0 points (95% CI [-26.6, -17.4]) and -26.5 ([-31.3, -21.8]). Conservative abstention accompanies severe multi-session and temporal failures. ICE uses less context in this diagnostic, establishing a quality-cost trade-off rather than superior efficiency. Together, replay, fidelity auditing, and public endpoint testing expose distinct failure modes that neither architectural descriptions nor aggregate scores identify alone.

Large Language Models (LLMs) typically generate outputs token by token using a fixed compute budget, leading to inefficient resource utilization. To address this shortcoming, recent advancements in mixture of expert (MoE) models, speculative decoding, and early exit strategies leverage the insight that computational demands can vary significantly based on the complexity and nature of the input. However, identifying optimal routing patterns for dynamic execution remains an open challenge, limiting the full potential of these adaptive methods. To address this need, we study adaptive computation in LLMs more systematically. We propose a novel framework that integrates smaller auxiliary modules within each Feed-Forward Network layer of the LLM. This design enables dynamic routing of tokens based on task complexity: tokens can be processed by either the small or big modules at each layer, or even bypass certain layers entirely. This allows us to introduce a novel notion of a token's difficulty, defined by its potential to benefit from additional computational resources. Importantly, by employing oracles to identify optimal patterns of adaptive computations, we gain valuable insights into the internal workings of LLMs and the routing processes in a simplified heterogeneous MoE setup. We show that trained routers operate differently from oracles and often yield suboptimal solutions. Notably, activating a large module in just one layer outperforms models that use large modules across all layers, underscoring the gap between practical implementations of routing in MoE models and theoretical optima for adaptive computation.

The integration of Large Language Models (LLMs) into applications ranging from interactive chatbots to multi-agent systems has introduced a wide spectrum of service-level objectives (SLOs) for responsiveness. These include latency-sensitive requests emphasizing per-token latency in streaming chat, deadline-sensitive requests requiring rapid full responses to trigger external tools, and compound requests with evolving dependencies across multiple LLM calls. Despite-or perhaps, because of-this workload diversity and unpredictable request information (e.g., response lengths and dependencies), existing request schedulers have focused on aggregate performance, unable to ensure application-level SLO needs. This paper presents JITServe, the first SLO-aware LLM serving system designed to maximize service goodput (e.g., the number of tokens meeting request SLOs) across diverse workloads. JITServe novelly schedules requests using imprecise request information and gradually relaxes this conservatism by refining request information estimates as generation progresses. It applies a grouped margin goodput maximization algorithm to allocate just enough serving bandwidth to satisfy each request's SLO just-in-time (JIT), maximizing residual capacity for others, while deciding the composition of requests in a batch to maximize efficiency and goodput with provable guarantees. Our evaluation across diverse realistic workloads, including chat, deep research, and agentic pipelines, shows that JITServe improves service goodput by 1.4x-6.3x, alternatively achieving 28.5%-83.2% resource savings, compared to state-of-the-art designs.

Web application development often proceeds through successive requests that extend an existing implementation. Yet web-generation benchmarks primarily evaluate development toward fixed specifications. We introduce EvoWeb, a novel benchmark comprising 320 cumulative requests over 32 web applications, grounded in real-world product features and structured by functional dependency graphs. Agents iteratively modify a persistent codebase, while a multimodal web agent tests each intermediate application in a live browser, assessing newly requested functionality, cross-request integration, and previously requested functionality. To characterize reliability throughout development, we integrate trajectory performance across user-tolerance thresholds rather than impose a fixed stopping criterion. Experiments across open- and closed-source frontier models show that EvoWeb reveals clear performance differences between models, with cross-request integration emerging as a key challenge. Further analysis shows that later requests with deeper or more numerous dependencies are solved less accurately, while runtime errors become more frequent over successive requests. EvoWeb provides a testbed for evaluating and improving coding agents in long-horizon, multi-request development.

Large language models (LLMs) propel the prosperity of interactive AI applications showcased by ChatGPT that demand timely response of inference services. However, LLM inference is computation intensive and memory intensive, and improper parameter configuration at LLM platforms may exacerbate the inference time. In this paper, we analyze the impact of LLM output token distribution on the inference queueing delay, where the max-token clipping and the batched inference are considered. By formulating an M/G/1 model, we observe that enforcing a maximum output token limit on a very small fraction of inference requests can significantly reduce the queueing delay, and our model facilitates the selection of the optimal limit. For the batch inference, we model the service process as a bulk queue in which the batch processing time is affected by the batch size and the maximum token size inside this batch jointly. The queueing delays of the batching of all buffered requests (dynamic batching), the batching of constant number of requests (fixed batching), and the batching without intra-batch waiting (elastic batching) are derived. Experimental results show that our mathematical models coincide with the event-driven simulations well.

Real-time interaction models -- Moshi, MiniCPM-o, Qwen-Omni -- turn serving into a periodic real-time task: on every frame a session ingests streaming audio and must respond by a recurring wall-clock deadline, while its KV cache grows monotonically and stays pinned for the whole conversation. This regime hides a dangerous failure mode. On a real full-duplex stack, sustained load does not degrade serving gracefully: it falls off a cliff, jumping in one step from milliseconds per frame to a stalled engine when accumulated session state exhausts the KV pool. The collapse is metastable -- identical five-minute runs collapse or survive on run-to-run variance -- and silent: latency and deadline-miss metrics read healthy throughout. We show one move restores both stability and observability: bound each session's resident state, and latency starts telling the truth. Metronome's in-engine KV window eliminates the collapse (0/20 vs. 14/20 runs across two batches) and turns per-frame latency into a monotone load signal, on which an online admission controller discovers the schedulable concurrency; without the window, the identical controller over-admits into the wall. A first-order model predicts the collapse time within a few percent on the headline model, and a quality probe validates the bound's design by ablation: the window alone is quality-free in turn-based decoding, and its few pinned attention-sink tokens are what keep free-running generation healthy. Everything is measured end-to-end on real audio, across four interaction models on one GPU.

Long-running LLM agents keep valuable state resident on GPUs: KV caches, request schedulers, communication state, and sometimes online adapters. Losing this state after a GPU or communicator failure can discard minutes to hours of work, yet existing recovery mechanisms either restart the whole serving stack or require application-specific checkpoint logic inside every attention and runtime component. This paper argues that fault tolerance for such workloads needs a GPU-resident execution context: checkpoint hooks must run at device synchronization points, observe binary kernels that frameworks and libraries actually execute, and recover without putting the host CPU on the critical path. We present Concordia, a runtime that uses a device-resident persistent kernel as the substrate for fault-tolerant LLM inference. Concordia interposes on GPU module loading and supports PTX- and SASS-level instrumentation, allowing checkpoint and pause hooks to be inserted below framework code and library boundaries. For each registered LLM state region, Concordia JIT-compiles a specialized delta-checkpoint handler -- for example, a KV-block scanner, adapter-page scanner, or recovery applier -- and hot-swaps it into the persistent kernel's operator table. The persistent kernel consumes a lock-free ring buffer of compute, checkpoint, append-log, and recovery tasks, so the same always-on executor triggers dirty-page detection, stages deltas, and appends committed records to a CPU-visible log in CXL memory or host DRAM.

Dynamic layer skipping reduces LLM computation by allowing each token to execute only a subset of the model's layers. However, existing skippers rely on specialized generation loops and do not integrate with modern serving engines. As a result, fewer executed layers do not necessarily translate into lower serving latency: FlexiDepth skips 8 of Llama-3-8B's 32 layers on average, yet its standard generation loop decodes 14.6--21.0% more slowly than the base model. We present vSkipper, a virtualization layer that makes dynamic layer skippers pluggable in serving engines while preserving continuous batching, fixed-shape batches, paged KV caching, and captured decode graphs. At each routed layer, vSkipper groups tokens by the skipper's decision and uses routed execution only when predicted to be profitable. We implement vSkipper in SGLang and evaluate the released FlexiDepth checkpoint against upstream SGLang under identical prompts, arrivals, output lengths, and launch settings. At the knee of upstream's load curve, vSkipper reduces mean end-to-end latency by 36.8% on GSM8K and 13.6% on BBH. Under saturation, it increases request throughput by 11.3% and 7.4%. Serving adds no statistically resolved quality loss beyond the checkpoint's own. Across synthetic skip policies, two Qwen3 skippers, and three GPUs, we demonstrate reuse without workload-specific tuning. To our knowledge, vSkipper is the first system to realize serving-efficiency gains from per-token interior layer skipping within a modern LLM serving engine. The code is open-sourced as an SGLang fork at https://github.com/AKafakA/sglang-vskipper/tree/vskipper-ref

As AI agents increasingly act through external tools, tool results are no longer simple outputs but execution artifacts that must remain correctly associated with the context that produced them. Yet as results persist across caches, recovery mechanisms, and shared runtime state, this association can break, causing a real and unmodified result to be consumed in an incompatible execution context and lead the agent to an unsafe action. We characterize this failure as tool-result misbinding. To systematically study this failure, we introduce ReplayBench, a benchmark that uses controlled tool-result replay to evaluate misbinding across 19 representative agent scenarios, 4 failure properties, and 3 replay mechanisms. Across eight LLMs, three agent frameworks, and diverse stateful workflows, we find widespread replay-induced failures, with a mean Final-State Error Rate of 0.649 under cross-task replay. Stage-wise analysis localizes these failures to model-side action generation. Further analyses show that replay susceptibility varies with task similarity, shows little dependence on object similarity, and remains high under result staleness and implicit environment changes. These findings motivate runtime validity mechanisms that eliminate final-state errors in our evaluated settings while preserving legitimate recovery. The results call for explicit contextual binding in tool-using agent runtimes. Our work is public at https://github.com/Phitooo/Replaybench.

Each LLM serving request goes through two phases. The first is prefill which processes the entire input prompt to produce one output token and the second is decode which generates the rest of output tokens, one-at-a-time. Prefill iterations have high latency but saturate GPU compute due to parallel processing of the input prompt. In contrast, decode iterations have low latency but also low compute utilization because a decode iteration processes only a single token per request. This makes batching highly effective for decodes and consequently for overall throughput. However, batching multiple requests leads to an interleaving of prefill and decode iterations which makes it challenging to achieve both high throughput and low latency. We introduce an efficient LLM inference scheduler Sarathi-Serve inspired by the techniques we originally proposed for optimizing throughput in Sarathi. Sarathi-Serve leverages chunked-prefills from Sarathi to create stall-free schedules that can add new requests in a batch without pausing ongoing decodes. Stall-free scheduling unlocks the opportunity to improve throughput with large batch sizes while minimizing the effect of batching on latency. Our evaluation shows that Sarathi-Serve improves serving throughput within desired latency SLOs of Mistral-7B by up to 2.6x on a single A100 GPU and up to 6.9x for Falcon-180B on 8 A100 GPUs over Orca and vLLM.

Imitation learning has enabled robots to acquire complex visuomotor manipulation skills from demonstrations, but deployment failures remain a major obstacle, especially for long-horizon action-chunked policies. Once execution drifts off the demonstration manifold, these policies often continue producing locally plausible actions without recovering from the failure. Existing runtime monitors either require failure data, over-trigger under benign feature drift, or stop at failure detection without providing a recovery mechanism. We present Rewind-IL, a training-free online safeguard framework for generative action-chunked imitation policies. Rewind-IL combines a zero-shot failure detector based on Temporal Inter-chunk Discrepancy Estimate (TIDE), calibrated with split conformal prediction, with a state-respawning mechanism that returns the robot to a semantically verified safe intermediate state. Offline, a vision-language model identifies recovery checkpoints in demonstrations, and the frozen policy encoder is used to construct a compact checkpoint feature database. Online, Rewind-IL monitors self-consistency in overlapping action chunks, tracks similarity to the checkpoint library, and, upon failure, rewinds execution to the latest verified safe state before restarting inference from a clean policy state. Experiments on real-world and simulated long-horizon manipulation tasks, including transfer to flow-matching action-chunked policies, demonstrate that policy-internal consistency coupled with semantically grounded respawning offers a practical route to improved reliability in imitation learning. Supplemental materials are available at https://sjay05.github.io/rewind-il

Training LLMs on decentralized and wimpy computation nodes, e.g., multiple on-spot instances, lowers the training cost and enables model democratization. The inevitable challenge here is the churn of nodes due to failures and the operator's scheduling policies, leading to losing a stage - a part of the model. The conventional approaches to recover from failures are to either use checkpointing, where periodically a copy of the entire model is sent to an additional storage, or redundant computation. These approaches yield significant communication and/or computation overhead even in non-failure cases and scale poorly in settings with large models. In this paper, we propose, CheckFree, an efficient recovery method where a failing stage is substituted by a weighted average of the closest neighboring stages. In contrast to the state of the art, CheckFree requires no additional computation or storage. However, because of the nature of averaging neighbouring stages, it can only recover failures of intermediate stages. We further extend our method to CheckFree+ with out-of-order pipeline execution to tolerate crashes of the first and last stages. Thanks to out-of-order pipelining, behaviour of those stages is mimicked by their neighboring ones, which allows CheckFree+ to recover them by simply copying the weights from the immediate neighbour. To be able to recover the (de)embedding layers, CheckFree+ copies those layers to the neighboring stages, which requires relatively small storage overhead. We extensively evaluate our method on LLaMa models of model sizes from 124M to 1.5B with varying failure frequencies. In the case of low and medium failure rates (5-10%), CheckFree and CheckFree+ outperform both checkpointing and redundant computation in terms of convergence in wall-clock time by over 12%. Both of our proposals can be run via our code available at: https://github.com/gensyn-ai/CheckFree.

The growing demand for large language models (LLMs) requires serving systems to handle many concurrent requests with diverse service level objectives (SLOs). This exacerbates head-of-line (HoL) blocking during the compute-intensive prefill phase, where long-running requests monopolize resources and delay higher-priority ones, leading to widespread time-to-first-token (TTFT) SLO violations. While chunked prefill enables interruptibility, it introduces an inherent trade-off between responsiveness and throughput: reducing chunk size improves response latency but degrades computational efficiency, whereas increasing chunk size maximizes throughput but exacerbates blocking. This necessitates an adaptive preemption mechanism. However, dynamically balancing execution granularity against scheduling overheads remains a key challenge. In this paper, we propose FlowPrefill, a TTFT-goodput-optimized serving system that resolves this conflict by decoupling preemption granularity from scheduling frequency. To achieve adaptive prefill scheduling, FlowPrefill introduces two key innovations: 1) Operator-Level Preemption, which leverages operator boundaries to enable fine-grained execution interruption without the efficiency loss associated with fixed small chunking; and 2) Event-Driven Scheduling, which triggers scheduling decisions only upon request arrival or completion events, thereby supporting efficient preemption responsiveness while minimizing control-plane overhead. Evaluation on real-world production traces shows that FlowPrefill improves maximum goodput by up to 5.6times compared to state-of-the-art systems while satisfying heterogeneous SLOs.

Serving disaggregated large language models (LLMs) over tens of thousands of xPU devices (GPUs or NPUs) with reliable performance faces multiple challenges. 1) Ignoring the diversity (various prefixes and tidal requests), treating all the prompts in a mixed pool is inadequate. To facilitate the similarity per scenario and minimize the inner mismatch on P/D (prefill and decoding) processing, fine-grained organization is required, dynamically adjusting P/D ratios for better performance. 2) Due to inaccurate estimation on workload (queue status or maintained connections), the global scheduler easily incurs unnecessary timeouts in prefill. 3) Block-fixed device-to-device (D2D) KVCache transfer over cluster-level RDMA (remote direct memory access) fails to achieve desired D2D utilization as expected. To overcome previous problems, this paper proposes an end-to-end system P/D-Serve, complying with the paradigm of MLOps (machine learning operations), which models end-to-end (E2E) P/D performance and enables: 1) fine-grained P/D organization, mapping the service with RoCE (RDMA over converged ethernet) as needed, to facilitate similar processing and dynamic adjustments on P/D ratios; 2) on-demand forwarding upon rejections for idle prefill, decoupling the scheduler from regular inaccurate reports and local queues, to avoid timeouts in prefill; and 3) efficient KVCache transfer via optimized D2D access. P/D-Serve is implemented upon Ascend and MindSpore, has been deployed over tens of thousands of NPUs for more than eight months in commercial use, and further achieves 60\%, 42\% and 46\% improvements on E2E throughput, time-to-first-token (TTFT) SLO (service level objective) and D2D transfer time. As the E2E system with optimizations, P/D-Serve achieves 6.7x increase on throughput, compared with aggregated LLMs.

Large language models (LLMs) are increasingly deployed as customer-facing agents, yet evaluating their reliability remains challenging due to stochastic, multi-turn interactions. Current evaluation protocols rely on linear Monte Carlo rollouts of complete agent-user conversations to estimate success. However, this approach is computationally inefficient, repeatedly regenerating identical early prefixes, and often fails to uncover deep failure modes that arise from rare user behaviors. We introduce DIVERT (Diversity-Induced Evaluation via Branching of Trajectories), an efficient, snapshot-based, coverage-guided user simulation framework for systematic exploration of agent-user interactions. DIVERT captures the full agent-environment state at critical decision points and resumes execution from these snapshots, enabling reuse of shared conversation prefixes and reducing redundant computation. From each junction, the framework branches using targeted, diversity-inducing user responses, allowing directed exploration of alternative interaction paths. By focusing evaluation on semantically diverse and underexplored trajectories, DIVERT improves both efficiency and coverage. Empirical results show that it discovers more failures per token compared to standard linear rollout protocols, while expanding the set of tasks on which failures are identified.

Large-scale AI training is now fundamentally a distributed systems problem, and hardware failures have become routine operating conditions rather than rare exceptions. Public operational evidence from production training clusters, however, remains scarce. This technical report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The cluster operates within a cross-organizational environment in which five parties (SKT, Upstage, Lablup, NVIDIA Korea, and VAST Data) share a unified monitoring pipeline. This arrangement enabled joint diagnosis of a 60-node-scale storage I/O bottleneck that did not appear at 2-4-node scale, a production-scale phenomenon no single team could isolate alone. Drawing on a months-long pre-training campaign, we perform three quantitative analyses yielding four findings. First, statistical analysis over 751 Prometheus metrics and 10 XID-identified GPU failures achieves a 10/10 detection rate (2/10 pre-XID) at ~0.84 false positives per day. No single metric is consistently dominant across failure types, motivating a multi-signal detection strategy. Second, profiling 523 checkpoint events along the GPU VRAM to NFS path attributes the "bandwidth paradox" (1.4-10.4% utilization of 200 Gbps RoCE) to saturation of the 128-slot NFS RPC layer. Third, multi-node failure response shows concentrated exclusions (top 3 of 63 nodes account for >50% of all exclusions) and an auto-retry chain success rate of 33.3% over 12 chains (73 attempts), 2.7x the 12.5% manual recovery rate; the median retry interval is 11 min (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

Automated vulnerability reproduction from CVE descriptions requires generating executable Proof-of-Concept (PoC) exploits and validating them in target environments. This process is critical in software security research and practice, yet remains time-consuming and demands specialized expertise when performed manually. While LLM agents show promise for automating this task, existing approaches often conflate exploring attack directions with fixing implementation details, which leads to unproductive debugging loops when reproduction fails. To address this, we propose CVE2PoC, an LLM-based dual-loop agent framework following a plan-execute-evaluate paradigm. The Strategic Planner analyzes vulnerability semantics and target code to produce structured attack plans. The Tactical Executor generates PoC code and validates it through progressive verification. The Adaptive Refiner evaluates execution results and routes failures to different loops: the Tactical Loop for code-level refinement, while the Strategic Loop for attack strategy replanning. This dual-loop design enables the framework to escape ineffective debugging by matching remediation to failure type. Evaluation on two benchmarks covering 617 real-world vulnerabilities demonstrates that CVE2PoC achieves 82.9% and 54.3% reproduction success rates on SecBench.js and PatchEval, respectively, outperforming the best baseline by 11.3% and 20.4%. Human evaluation confirms that generated PoCs achieve comparable code quality to human-written exploits in readability and reusability.

The continuous delivery of modern software requires the execution of many automated pipeline jobs. These jobs ensure the frequent release of new software versions while detecting code problems at an early stage. For TELUS, our industrial partner in the telecommunications field, reliable job execution is crucial to minimize wasted time and streamline Continuous Deployment (CD). In this context, flaky job failures are one of the main issues hindering CD. Prior studies proposed techniques based on machine learning to automate the detection of flaky jobs. While valuable, these solutions are insufficient to address the waste associated with the diagnosis of flaky failures, which remain largely unexplored due to the wide range of underlying causes. This study examines 4,511 flaky job failures at TELUS to identify the different categories of flaky failures that we prioritize based on Recency, Frequency, and Monetary (RFM) measures. We identified 46 flaky failure categories that we analyzed using clustering and RFM measures to determine 14 priority categories for future automated diagnosis and repair research. Our findings also provide valuable insights into the evolution and impact of these categories. The identification and prioritization of flaky failure categories using RFM analysis introduce a novel approach that can be used in other contexts.

Real-time execution is essential for cyber-physical systems such as robots. These systems operate in dynamic real-world environments where even small delays can undermine responsiveness and compromise performance. Asynchronous inference has recently emerged as a system-level paradigm for real-time robot manipulation, enabling the next action chunk to be predicted while the current one is being executed. While this approach achieves real-time responsiveness, naive integration often results in execution failure. Previous methods attributed this failure to inter-chunk discontinuity and developed test-time algorithms to smooth chunk boundaries. In contrast, we identify another critical yet overlooked factor: intra-chunk inconsistency, where the robot's executed action chunk partially misaligns with its current perception. To address this, we propose REMAC, which learns corrective adjustments on the pretrained policy through masked action chunking, enabling the policy to remain resilient under mismatches between intended actions and actual execution during asynchronous inference. In addition, we introduce a prefix-preserved sampling procedure to reinforce inter-chunk continuity. Overall, our method delivers more reliable policies without incurring additional latency. Extensive experiments in both simulation and real-world settings demonstrate that our method enables faster task execution, maintains robustness across varying delays, and consistently achieves higher completion rates.

A framework that persists execution state so a run can be interrupted, survive a crash, and continue must decide what a resume means for effects that already happened. Five widely deployed agent workflow frameworks answer differently, none exposes a machine-checkable contract, and measured behavior violates even the fragments they state. The RESUME CONTRACT states six properties over the persistence API (prefix continuation, effect exactly-once, fork determinism, checkpoint validity, consume-once, recovery determinism), plus fork-intent and liveness obligations. A TLA+ model checks a reference semantics exhaustively, unchanged at scaled bounds (7.4 million states), and the reference conjunction is additionally TLAPS-proved unbounded (196 obligations); a 39-cell fault matrix and two companion modules yield the separating models independence requires. A deterministic, LLM-free harness measures them at pinned releases. LangGraph 1.2.9 durably records a second resume value and never consults it, persists schema-invalid state silently, and re-executes durably recorded work after a real SIGKILL: exactly-once across interrupts, at-least-once across crashes, on one API. CrewAI 1.15.2 re-executes completed effect-bearing methods against its written claim; pydantic-graph 1.x cannot resume after a mid-node crash; no two probed frameworks share a conformance profile. Consume-once holds sequentially and fails under concurrent delivery: k processes resuming one parked interrupt fire the gated effect k times, saturation 1.0 in 36 of 40 cells, and the failure crosses hosts. REMIT, a reference sequencer whose Verus-verified recovery core is line-identical to the shipped executable, repairs the fork and validity cells. The cross-process cell is repaired at the read path: an opt-in gate claims consumption in the shared store, serving one racer and refusing the rest before any node executes.

Asynchronous reinforcement learning improves throughput by decoupling rollout generation from optimization, but staleness is an inevitable byproduct compounded by policy lag, engine delays, and mixture-of-experts routing. From a trust-region perspective, this mismatch is critical: training-inference divergence governs approximation error in finite-horizon bounds, whereas PPO clipping only gates sampled outward updates, acting as a sampled surrogate rather than a full-policy constraint. As a result, high-staleness updates remain weakly controlled in the asynchronous regime where stale rollouts matter most. We introduce the Staleness-Adaptive Trust Region (SAT), which uses the detached sampled log-ratio as a practical staleness proxy, identifies high-mismatch tails within each batch via staleness-based kernel scaling, and contracts only the sign-selected endpoint of the nominal PPO interval. This preserves baseline behavior on ordinary tokens while enforcing more conservative updates on newly intercepted outward bands. We prove local interval containment and pointwise pessimism relative to PPO, showing how the adaptive rule reshapes update geometry under heterogeneous staleness. We evaluate SAT in a decoupled asynchronous RL setup built on Qwen3-30B-A3B-Base, using SGLang as the inference engine and Megatron for training. In this setting, SAT-GSPO w/ R3 achieves the best observed AIME24 avg@8, reaching 35.83 at lag 1 and 34.79 at lag 8, while SAT-GSPO reaches 34.17 at lag 1. Adaptive clipping and routing replay act as complementary stabilizers targeting mismatch tails and routing inconsistency, respectively. Overall, aligning clip intervals with staleness heterogeneity effectively stabilizes asynchronous RL.

While Multi-Agent Systems (MAS) excel in complex reasoning, they suffer from the cascading impact of erroneous information generated by individual participants. Current solutions often resort to rigid structural engineering or expensive fine-tuning, limiting their deployability and adaptability. We propose AgentDropoutV2, a test-time rectify-or-reject pruning framework designed to dynamically optimize MAS information flow without retraining. Our approach acts as an active firewall, intercepting agent outputs and employing a retrieval-augmented rectifier to iteratively correct errors based on a failure-driven indicator pool. This mechanism allows for the precise identification of potential errors using distilled failure patterns as prior knowledge. Irreparable outputs are subsequently pruned to prevent error propagation, while a fallback strategy preserves system integrity. Empirical results on extensive math benchmarks show that AgentDropoutV2 significantly boosts the MAS's task performance, achieving an average accuracy gain of 6.3 percentage points on math benchmarks. Furthermore, the system exhibits robust generalization and adaptivity, dynamically modulating rectification efforts based on task difficulty while leveraging context-aware indicators to resolve a wide spectrum of error patterns. Our code and dataset are released at https://github.com/TonySY2/AgentDropoutV2.

Large language models (LLMs) can translate natural language into optimization code, but silent failures pose a critical risk: code that executes and returns solver-feasible solutions may encode semantically incorrect formulations, creating a feasibility-correctness gap of up to 90 percentage points on compositional problems. We introduce ReLoop, addressing silent failures from two complementary directions. Structured generation decomposes code production into a four-stage reasoning chain (understand, formalize, synthesize, verify) that mirrors expert modeling practice, with explicit variable-type reasoning and self-verification to prevent formulation errors at their source. Behavioral verification detects errors that survive generation by testing whether the formulation responds correctly to solver-based parameter perturbation, without requiring ground truth -- an external semantic signal that bypasses the self-consistency problem inherent in LLM-based code review. The two mechanisms are complementary: structured generation dominates on complex compositional problems, while behavioral verification becomes the largest single contributor on problems with localized formulation defects. Together with execution recovery via IIS-enhanced diagnostics, ReLoop raises correctness from 22.6% to 31.1% and execution from 72.1% to 100.0% on the strongest model, with consistent gains across five models spanning three paradigms (foundation, SFT, RL) and three benchmarks. We additionally release RetailOpt-190, 190 compositional retail optimization scenarios targeting the multi-constraint interactions where LLMs most frequently fail.

Reinforcement learning (RL) has become a pivotal technology in the post-training phase of large language models (LLMs). Traditional task-colocated RL frameworks suffer from significant scalability bottlenecks, while task-separated RL frameworks face challenges in complex dataflows and the corresponding resource idling and workload imbalance. Moreover, most existing frameworks are tightly coupled with LLM training or inference engines, making it difficult to support custom-designed engines. To address these challenges, we propose AsyncFlow, an asynchronous streaming RL framework for efficient post-training. Specifically, we introduce a distributed data storage and transfer module that provides a unified data management and fine-grained scheduling capability in a fully streamed manner. This architecture inherently facilitates automated pipeline overlapping among RL tasks and dynamic load balancing. Moreover, we propose a producer-consumer-based asynchronous workflow engineered to minimize computational idleness by strategically deferring parameter update process within staleness thresholds. Finally, the core capability of AsynFlow is architecturally decoupled from underlying training and inference engines and encapsulated by service-oriented user interfaces, offering a modular and customizable user experience. Extensive experiments demonstrate an average of 1.59 throughput improvement compared with state-of-the-art baseline. The presented architecture in this work provides actionable insights for next-generation RL training system designs.

Linear attention has recently gained significant attention for long-context inference due to its constant decoding cost with respect to context length. However, existing serving systems typically serve linear attention by recurrently computing and updating a large linear attention state in every decoding step. Since the state is much larger than the per-token key and value, recurrent decoding incurs substantial memory access and becomes inefficient for serving linear attention. In this paper, we propose KVBuffer, an IO-aware serving mechanism for linear attention. By buffering recent keys and values, KVBuffer enables serving systems to compute linear attention outputs in more flexible and memory-efficient ways. For decoding, KVBuffer enables chunkwise computation, which reduces average memory access and decoding latency by deferring state updates and applying them in batch. For speculative decoding, KVBuffer verifies draft tokens in parallel and avoids storing temporary states. For short contexts, KVBuffer computes attention outputs directly from buffered keys and values, without creating or updating the linear attention state. We implement KVBuffer in SGLang for Qwen3-Next. Our evaluations show that KVBuffer can reduce linear attention decoding latency by up to 45.17% and increase the maximum number of serving requests by 5x for speculative decoding when verifying four draft tokens.

Existing benchmarks for LLM coding agents primarily evaluate final outcomes. While useful for measuring overall capability, these metrics provide limited visibility and often miss defects that arise during execution. We present ProcCtrlBench, a benchmark for execution-process evaluation in LLM coding agents. ProcCtrlBench organizes recurrent execution defects into a reusable ontology covering 11 defect types in 4 categories, and evaluates agent trajectories through standardized process evidence rather than final outcomes alone. To support comparison across heterogeneous agents, ProcCtrlBench standardizes raw logs into a unified trajectory representation and reports calibrated scorecards over process-level findings. In addition, ProcCtrlBench uses control preservation as a way to quantify execution-process quality, capturing whether execution remains interpretable, interruptible, correctable, reversible, and able to hand back authority when needed. We evaluate ProcCtrlBench on 200 cases sampled from three benchmarks: AndroidBench, TerminalBench, and SWE-bench-Verified. Results show that ProcCtrlBench can be instantiated with useful reliability, provides more stable semantics than direct thresholding, and reveals meaningful differences in execution quality that are often overlooked by conventional outcome-based evaluation.

Reactive programming frameworks such as React allow developers to build interactive applications by declaratively specifying how outputs depend on changing inputs. Although this model makes it easy to reason about what an application computes, the temporal behavior of reactive programs remains difficult to understand and verify. Applications implicitly rely on timing assumptions buried in framework runtimes, leading to subtle bugs such as stale reads, transient inconsistencies, order-dependent behavior, and unintended feedback cycles. To address these challenges, this paper presents Willow, a core calculus for reactive programming inspired by React. Willow gives a time-aware operational semantics that models computation in terms of renders, the fundamental evaluation step in which components produce user interface descriptions, and pairs it with a novel type-and-effect system that statically tracks timing behavior as effects. A "next" modality expresses delays measured not only in renders but in any unit the host environment exposes--renders, network requests, or milliseconds. A family of modalities tracks the lifecycle of event handlers: when they are registered, when they fire, when pending events are canceled and when handlers are removed. A key insight is that the resulting effects form a temporal dependency graph, letting standard graph algorithms statically detect render cascades and inter-render loops that cause non-termination or performance degradation. We formalize Willow and prove preservation of the effect system with respect to the time-aware semantics. We also implement a prototype checker with automatic effect inference and evaluate it on representative reactive patterns such as debouncing, form inputs, and API-driven updates. Our results demonstrate that time-aware typing provides a practical foundation for reasoning about the temporal correctness of reactive programs.

In the rapidly evolving domain of distributed ledger technology, scalability and interoperability have become paramount challenges for both academic and industry sectors. In this paper, we introduce a comprehensive formal model to address atomic composability across multiple rollups on Ethereum. The proposed model incorporates mechanisms like buffering, dependency management, concurrency control, and the groundbreaking zero-knowledge proofs. Moreover, we evaluate its practical repercussions, strengths, and weaknesses, ensuring resilience against manipulative or erroneous actions. The application of the proposed model to shared sequencers and other existing solutions accentuates its versatility and universality.

Capable open-weight models make local coding and reasoning attractive, but their context and execution state strain laptop memory. We present JustFit, an MLX-based inference runtime that combines KVExec for compressed KV execution, PhaseSwap for component residency, and StateTrans for state-preserving serving transitions. These mechanisms fuse reconstruction and coordinate just-in-time materialization and release, independently of model-weight quantization. In full-execution capacity tests on a 24 GiB M4 Pro MacBook running Qwen3.8-27B MXFP4, three independent runs complete 196,608 input and 16,384 output tokens, increasing completed single-request context from the mlx-vlm baseline's 30,720 positions to 212,992 (6.93x); a separate two-request run retains 229,376 positions in aggregate. In separate performance tests, a 32K-input, 64-output probe reaches 19.11 tokens/s, and a repeated 32K+6K workload has a median peak process footprint of 16,374 MiB. The integrated runtime answers 29 of 30 AIME 2026 problems correctly, showing how compact state and lifetime-aware execution expand local serving capacity while supporting extended generated reasoning.

Mixture-of-Experts (MoE) models enable scalable performance but face severe memory constraints on edge devices. Existing offloading strategies struggle with I/O bottlenecks due to the dynamic, low-information nature of autoregressive expert activation. In this paper, we propose to repurpose Speculative Decoding (SD) not merely as a compute accelerator, but as an informative lookahead sensor for memory management, supported by our theoretical and empirical analyses. Hence, we introduce MoE-SpAc, an MoE inference framework that integrates a Speculative Utility Estimator to track expert demand, a Heterogeneous Workload Balancer to dynamically partition computation via online integer optimization, and an Asynchronous Execution Engine to unify the prefetching and eviction in the same utility space. Extensive experiments on seven benchmarks demonstrate that MoE-SpAc achieves a 42% improvement in TPS over the SOTA SD-based baseline, and an average 4.04x speedup over all standard baselines. Code is available at https://github.com/lshAlgorithm/MoE-SpAc .

Current LLM-based coding agents follow a serial execution paradigm: the model first generates the complete code, then invokes an interpreter to execute it. This sequential workflow leaves the executor idle during generation and the generator idle during execution, resulting in unnecessary end-to-end latency. We observe that, unlike human developers, LLMs produce code tokens sequentially without revision, making it possible to execute code as it is being generated. We formalize this parallel execution paradigm, modeling it as a three-stage pipeline of generation, detection, and execution, and derive closed-form latency bounds that characterize its speedup potential and operating regimes. We then present Eager, a concrete implementation featuring AST-based chunking, dynamic batching with gated execution, and early error interruption. We evaluate Eager across four benchmarks, seven LLMs, and three execution environments. Results show that Eager reduces the non-overlapped execution latency by up to 99.9% and the end-to-end latency by up to 55% across seven LLMs and four benchmarks.

The Model Context Protocol (MCP) standardizes how AI agents discover and invoke external tools, with over 10,000 active servers and 97 million monthly SDK downloads as of early 2026. Yet MCP does not yet standardize how agents safely operate those tools at production scale. Three protocol-level primitives remain missing: identity propagation, adaptive tool budgeting, and structured error semantics. This paper identifies these gaps through field lessons from an enterprise deployment of an AI agent platform integrated with a major cloud provider's MCP servers (client name redacted). We propose three mechanisms to fill them: (1) the Context-Aware Broker Protocol (CABP), which extends JSON-RPC with identity-scoped request routing via a six-stage broker pipeline; (2) Adaptive Timeout Budget Allocation (ATBA), which frames sequential tool invocation as a budget allocation problem over heterogeneous latency distributions; and (3) the Structured Error Recovery Framework (SERF), which provides machine-readable failure semantics that enable deterministic agent self-correction. We organize production failure modes into five design dimensions (server contracts, user context, timeouts, errors, and observability), document concrete failure vignettes, and present a production readiness checklist. All three algorithms are formalized as testable hypotheses with reproducible experimental methodology. Field observations demonstrate that while MCP provides a solid protocol foundation, reliable agent tool integration requires infrastructure-level mechanisms that the specification does not yet address.

In LLM inference, the same prompt may yield different outputs across different runs. At the system level, this non-determinism arises from floating-point non-associativity combined with dynamic batching and GPU kernels whose reduction orders vary with batch size. A straightforward way to eliminate non-determinism is to disable dynamic batching during inference, but doing so severely degrades throughput. Another approach is to make kernels batch-invariant; however, this tightly couples determinism to kernel design, requiring new implementations. This coupling also imposes fixed runtime overheads, regardless of how much of the workload actually requires determinism. Inspired by ideas from speculative decoding, we present LLM-42, a scheduling-based approach to enable determinism in LLM inference. Our key observation is that if a sequence is in a consistent state, the next emitted token is likely to be consistent even with dynamic batching. Moreover, most GPU kernels use shape-consistent reductions. Leveraging these insights, LLM-42 decodes tokens using a non-deterministic fast path and enforces determinism via a lightweight verify-rollback loop. The verifier replays candidate tokens under a fixed-shape reduction schedule, commits those that are guaranteed to be consistent across runs, and rolls back those violating determinism. LLM-42 mostly re-uses existing kernels unchanged and incurs overhead only in proportion to the traffic that requires determinism.

We present PEEK, a lightweight scheduling and eviction framework for both online (streaming) and offline (batch) LLM serving; this paper focuses on the online regime. PEEK maintains an incremental radix tree over the pending queue, exposing prefix-sharing clusters no existing engine surfaces. A low-overhead dual-walk matches the tree against the engine's prefix cache to yield longest-prefix-match for every waiting request; PEEK then admits cluster pioneers first so siblings inherit the freshly cached prefix, a co-designed eviction hook protects blocks ancestral to queued demand, and a multi-lane stride scheduler bounds starvation. On SGLang and vLLM across five workloads up to 4timesH100 (DP=2 over TP=2), PEEK delivers up to 3.0times/2.6times cache hit, 7.9times/7.1times TTFT, 6.7times/5.5times E2E, and 3.6times/4.5times throughput gains over each engine's strongest stock baseline (SGLang/vLLM), while matching baselines within noise on workloads with no exploitable prefix structure. Wins hold as KV-cache pressure and inference parallelism scale.

Embedding-based code retrieval is a core component of coding agents and retrieval-augmented code generation, where retrieving correct code matters more than retrieving lexically similar code. Existing code-retrieval benchmarks do not plant controlled, execution-verified single-edit variants of each query's canonical implementation in the search pool, leaving the question of whether embeddings can functionally discriminate correct from near-clone-but-incorrect code unanswered in a retrieval setting. Resolving this requires a benchmark whose search pool itself contains the relevant counterfactuals -- execution-verified buggy variants near-identical to each canonical -- so that a retriever's rank ordering can be directly tested for functional discrimination rather than topical or identity overlap. We introduce ExecRetrieval, 939 Python tasks each paired with one execution-verified canonical implementation and up to four execution-verified buggy distractors, each generated by a mechanical mutation making a single targeted edit, and evaluate 23 dense embedding configurations plus BM25 under provider-native invocation with paired McNemar tests and query-level bootstrap intervals. With near-clone counterfactuals in the pool, the top hosted system reaches exec@10 = 1.00 but only exec@1 = 0.331; rank-1 misses are paired buggy variants 91.5-99.4% of the time across the four leading systems, and the canonical scores below at least one of its four paired distractors in 67-78% of queries on the leading systems. The full dataset, execution oracle, embedding matrices, environment snapshot, and pairwise statistical tests are released at the URL in Appendix D.

This work studies how to adaptively recompute key-value (KV) caches for diffusion large language models (DLMs) to maximize prediction accuracy while minimizing decoding latency. Prior methods' decoders recompute QKV for all tokens at every denoising step and layer, despite KV states changing little across most steps, especially in shallow layers, leading to substantial redundancy. We make three observations: (1) distant {bf MASK} tokens primarily act as a length-bias and can be cached block-wise beyond the active prediction window; (2) KV dynamics increase with depth, suggesting that selective refresh starting from deeper layers is sufficient; and (3) the most-attended token exhibits the smallest KV drift, providing a conservative lower bound on cache change for other tokens. Building on these, we propose {bf Elastic-Cache}, a training-free, architecture-agnostic strategy that jointly decides {when} to refresh (via an attention-aware drift test on the most-attended token) and {where} to refresh (via a depth-aware schedule that recomputes from a chosen layer onward while reusing shallow-layer caches and off-window MASK caches). Unlike fixed-period schemes, Elastic-Cache performs adaptive, layer-aware cache updates for diffusion LLMs, reducing redundant computation and accelerating decoding with negligible loss in generation quality. Experiments on LLaDA-Instruct, LLaDA-1.5, and LLaDA-V across mathematical reasoning and code generation tasks demonstrate consistent speedups: 8.7times on GSM8K (256 tokens), 45.1times on longer sequences, and 4.8times on HumanEval, while consistently maintaining higher accuracy than the baseline. Our method achieves significantly higher throughput (6.8times on GSM8K) than existing confidence-based approaches while preserving generation quality, enabling practical deployment of diffusion LLMs.

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

Code agents increasingly help developers work with unfamiliar repositories, but every such task depends on a costly prerequisite: bootstrapping the repository into a usable development state. This process requires substantial trial-and-error exploration, yet the resulting knowledge--resolved dependencies, repair strategies--stays trapped in a single conversation, unavailable to future agents. We therefore formulate repository bootstrapping as a reusable startup knowledge problem and introduce BootstrapAgent, a multi-agent framework that distills the heuristics discovered during bootstrap exploration into a persistent, verifiable, agent-consumable .bootstrap contract. Through evidence extraction, structured planning, deterministic Docker-based verification, and trace-driven repair, BootstrapAgent generates a contract covering environment setup, diagnostic checks, minimal verification, and accumulated repair knowledge. We further propose warm repair with clean replay to accelerate iterative debugging without sacrificing cold-start reproducibility, and a delta repair with sanity check to prevent reward hacking. Experiments on three benchmarks show that BootstrapAgent achieves a 92.9% success rate, outperforming the baseline by over 10% while reducing downstream agent token usage by 25.9% and build time by 22.3%. Our code is available at https://github.com/Vossera/BootstrapAgent.

Embodied agents replan frequently to recover from execution drift, partial observability, and coordination hazards, but each LLM-based replanning call can consume an accumulated textual context that grows over time and across agents. Once this context becomes large, replanning latency develops heavy tails and can miss real-time deadlines even when task success remains high, a failure mode that is hard to detect from average latency or success alone. We present BRACE, a controller that formulates replanning as a budgeted control loop by deciding whether to replan, selecting a replanning mode, and allocating an explicit token budget and latency service-level objective (SLO) while accounting for optional efficiency modules. As a reusable component, we introduce E-RECAP, a cost-aware progressive token pruning method that predicts token utility and prunes replanning contexts across transformer layers while preserving critical head and tail tokens. Across Meta Habitat, RoboFactory, and AirSim, BRACE with E-RECAP reduces replanning-call token counts by 62-92% and SLO violation rates from 85.5-100.0% to 4.7-50.0% in settings where task success is already saturated. In a harder RoboFactory setting where open-loop, frozen-plan, and No BRACE all fail, BRACE + E-RECAP reaches 80.0% success with 4.6% SLO violations, demonstrating that tail-aware per-call budgeting is effective across embodied platforms.

Commercial on-device network operating systems (NOSes) run complex control planes in production routers and switches, where configuration update tasks are executed by multiple loosely coupled components through asynchronous message passing. Such executions are prone to race conditions: the same ordered input commands may produce different outcomes when messages are delivered in different orders. The race conditions are difficult to expose because they often manifest only as subtle, delayed malfunctions. Existing static analysis techniques lack scalability and precision for large-scale industrial NOSes, while dynamic ones incur substantial system-execution cost when attempting to cover the space of asynchronous message interleavings. To address the challenges above, we present NosRacer, a dynamic analysis framework for race condition detection in industrial-grade on-device NOSes. NosRacer uses a two-phase design. The concentration phase reduces analysis scope by leveraging the locality of configuration update tasks. Race condition detection is then limited to a small subset of involved components and crucial state variables, thereby reducing the detection cost. The perturbation phase proactively perturbs message asynchrony to increase the likelihood of executions with race-condition-exposing message interleavings. It keeps perturbation practical by grouping compatible perturbations for parallel execution and adaptively strengthening perturbations. We implement NosRacer in a commercial, actively developed NOS. NosRacer is integrated into the existing testing factory and used to detect race conditions in 5 key control-plane components. NosRacer achieves 66% precision and detects 21 race conditions confirmed by developers as severe bugs, while keeping the detection overhead below 10%.

LLM agents that cache recovery suggestions from API errors can skip re-derivation in later episodes, spending fewer tokens and fewer model calls on constraints they have already learned. Server-side data drift turns those cached fixes into silent failures, and the usual remedy, re-deriving on every episode, gives the savings back. We introduce invalidation contracts, a protocol layer that attaches version stamps and cacheability hints to every recovery suggestion so the client can evict stale entries without trial and error, and keep the rest. The contract decomposes realized savings into two independent factors: validity, the fraction of cached suggestions that remain correct after a drift event, and compliance, the fraction the planner applies on the first attempt. Validity depends only on the protocol and is vendor-independent. Compliance depends on the planner model: identical wire bytes yield 100% first-try compliance on Claude Haiku 4.5 and 11% or below on Claude Sonnet 5, which exhibits input-schema conservatism, refusing fixes that add fields the original request did not contain. We evaluate across seven models, three serving paths, two domains, and approximately 9,400 episodes. Row-level invalidation raises compliance by 0 to 66.7 percentage points across the seven models, 55.6 to 66.7 on three, and recovers 29-33% of baseline token cost on four of seven models, while table-level invalidation destroys co-located entries and drops post-drift first-try rates to 0% on five of seven. Eviction precision is 1.00 at row granularity on every model under the row-level oracle of Section 4.1. The contract adds 15% to response payload. Version-stamp validity is deterministic by construction and produced identical results across every model and serving path, with zero contract failures in the entire evaluation.