Daily Papers

We propose a method to reconstruct dynamic fire in 3D from a limited set of camera views with a Gaussian-based spatiotemporal representation. Capturing and reconstructing fire and its dynamics is highly challenging due to its volatile nature, transparent quality, and multitude of high-frequency features. Despite these challenges, we aim to reconstruct fire from only three views, which consequently requires solving for under-constrained geometry. We solve this by separating the static background from the dynamic fire region by combining dense multi-view stereo images with monocular depth priors. The fire is initialized as a 3D flow field, obtained by fusing per-view dense optical flow projections. To capture the high frequency features of fire, each 3D Gaussian encodes a lifetime and linear velocity to match the dense optical flow. To ensure sub-frame temporal alignment across cameras we employ a custom hardware synchronization pattern -- allowing us to reconstruct fire with affordable commodity hardware. Our quantitative and qualitative validations across numerous reconstruction experiments demonstrate robust performance for diverse and challenging real fire scenarios.

Synchronization in one dimension displays generic scale invariance with universal properties previously observed in surface kinetic roughening and the wider context of the Kardar-Parisi-Zhang (KPZ) universality class. This has been established for phase oscillators and also for some limit-cycle oscillators, both in the presence of columnar (quenched) disorder and of time-dependent noise, by extensive numerical simulations, and has been analytically motivated by continuum approximations in the strong oscillator coupling limit. The robustness and the precise boundaries in parameter space for such critical behavior remain unclear, however, which may preclude further developments, including the extension of these results to higher dimensions and the experimental observation of nonequilibrium criticality in synchronizing (e.g.~electronic or chemical) oscillators. We here present complete numerical phase diagrams of one-dimensional synchronization, including saturation times and values, but, most importantly, also dynamical features giving insight into the gradual emergence of synchronous dynamics, based on systems of phase oscillators with either type of randomness. In the absence of synchronization, the dynamics evolves as expected for random deposition (for time-dependent noise) or linear growth (for columnar disorder), while a crossover from Edwards-Wilkinson to Kardar-Parisi-Zhang behavior (with the corresponding type of randomness) is observed as the randomness strength, or the nonoddity of the coupling among oscillators, is increased in the synchronous region -- their combined effect being partially captured by the so-called KPZ coupling. The distortion of scaling due to phase slips near the desynchronization boundary, a feature that is likely to play a role in experimental contexts, is also discussed.

I introduce a novel mathematical framework integrating topological dynamics, operator algebras, and ergodic geometry to study lattices of asynchronous metric dynamical systems. Each node in the lattice carries an internal flow represented by a one-parameter family of operators, evolving on its own time scale. I formalize stratified state spaces capturing multiple levels of synchronized behavior, define an asynchronous evolution metric that quantifies phase-offset distances between subsystems, and characterize emergent coherent topologies arising when subsystems synchronize. Within this framework, I develop formal operators for the evolution of each subsystem and give precise conditions under which phase-aligned synchronization occurs across the lattice. The main results include: (1) the existence and uniqueness of coherent (synchronized) states under a contractive coupling condition, (2) stability of these coherent states and criteria for their emergence as a collective phase transition in a continuous operator topology, and (3) the influence of symmetries, with group-invariant coupling leading to flow-invariant synchrony subspaces and structured cluster dynamics. Proofs are given for each theorem, demonstrating full mathematical rigor. In a final section, I discuss hypothetical applications of this framework to symbolic lattice systems (e.g. subshifts), to invariant group actions on dynamical lattices, and to operator fields over stratified manifolds in the spirit of noncommutative geometry. Throughout, I write in the first person to emphasize the exploratory nature of this work. The paper avoids any reference to cosmology or observers, focusing instead on clean, formal mathematics suitable for a broad array of dynamical systems.

Stereo vision is essential for many applications. Currently, the synchronization of the streams coming from two cameras is done using mostly hardware. A software-based synchronization method would reduce the cost, weight and size of the entire system and allow for more flexibility when building such systems. With this goal in mind, we present here a comparison of different deep learning-based systems and prove that some are efficient and generalizable enough for such a task. This study paves the way to a production ready software-based video synchronization system.

Time series play a fundamental role in many domains, capturing a plethora of information about the underlying data-generating processes. When a process generates multiple synchronized signals we are faced with multidimensional time series. In this context a fundamental problem is that of motif mining, where we seek patterns repeating twice with minor variations, spanning some of the dimensions. State of the art exact solutions for this problem run in time quadratic in the length of the input time series. We provide a scalable method to find the top-k motifs in multidimensional time series with probabilistic guarantees on the quality of the results. Our algorithm runs in time subquadratic in the length of the input, and returns the exact solution with probability at least 1-δ, where δ is a user-defined parameter. The algorithm is designed to be adaptive to the input distribution, self-tuning its parameters while respecting user-defined limits on the memory to use. Our theoretical analysis is complemented by an extensive experimental evaluation, showing that our algorithm is orders of magnitude faster than the state of the art.

A network of oscillators that synchronizes perfectly computes nothing further, so an attention architecture built from synchronization must locate its computation in structured departures from agreement. We introduce the Frustrated Synchronization Network (FSN), whose token states are phases on a torus and whose entire value pathway is one learned complex coupling kernel over harmonics and a one-step delay. Each component of the kernel is a frustration in the sense of the synchronization literature. The complex phases are static Kuramoto-Sakaguchi frustration angles, the signed harmonics are repulsive Daido components, and the delay term, which couples each token to the successors of the tokens it attends to, is algebraically identical to Kuramoto-Sakaguchi coupling whose frustration angle is the data's own transition, so next-token prediction is implemented as synchronization frustrated by the data. At matched one-million-parameter and training budgets on character-level text and code, the FSN's validation loss is below a tuned RoPE-SwiGLU transformer's at every epoch measured, and the comparison survives training the baseline to convergence: every thirty-epoch enwik8 seed finishes below the transformer's converged fifty-epoch loss of 1.611, and the FSN's completed fifty-epoch runs converge to 1.5953 +/- 0.0014. A variant with every feed-forward block replaced by mean-field coupling to learned collective modes, leaving no multilayer perceptron in the stack, tracks the transformer. On natural text the unfrustrated base layer falls behind the converged transformer at every copy depth, worst on long-range copy events; the kernel reverses the deficit at every depth of four and beyond. Headline comparisons are at the one-million-parameter scale; a scale ladder is complete through four million parameters with the advantage persisting, and remaining arms are marked as in progress.

The application of large-language models (LLMs) to digital hardware code generation is an emerging field. Most LLMs are primarily trained on natural language and software code. Hardware code, such as Verilog, represents only a small portion of the training data and few hardware benchmarks exist. To address this gap, the open-source VerilogEval benchmark was released in 2023, providing a consistent evaluation framework for LLMs on code completion tasks. It was tested on state-of-the-art models at the time including GPT-4. However, VerilogEval and other Verilog generation benchmarks lack failure analysis and, in present form, are not conducive to exploring prompting techniques. Also, since VerilogEval's release, both commercial and open-source models have seen continued development. In this work, we evaluate new commercial and open-source models of varying sizes against an improved VerilogEval benchmark suite. We enhance VerilogEval's infrastructure and dataset by automatically classifying failures, introduce new prompts for supporting in-context learning (ICL) examples, and extend the supported tasks to specification-to-RTL translation. We find a measurable improvement in commercial state-of-the-art models, with GPT-4 Turbo achieving a 59% pass rate on spec-to-RTL tasks. We also study the performance of open-source and domain-specific models that have emerged, and demonstrate that models can benefit substantially from ICL. We find that recently-released Llama 3.1 405B achieves a pass rate of 58%, effectively matching that of GPT-4 Turbo, and that the much smaller domain-specific RTL-Coder 6.7B models achieve an impressive 37% pass rate. However, prompt engineering is key to achieving good pass rates, and varies widely with model and task. A benchmark infrastructure that allows for prompt engineering and failure analysis is key to continued model development and deployment.

Training deep neural networks (DNNs) using traditional backpropagation (BP) presents challenges in terms of computational complexity and energy consumption, particularly for on-device learning where computational resources are limited. Various alternatives to BP, including random feedback alignment, forward-forward, and local classifiers, have been explored to address these challenges. These methods have their advantages, but they can encounter difficulties when dealing with intricate visual tasks or demand considerable computational resources. In this paper, we propose a novel Local Learning rule inspired by neural activity Synchronization phenomena (LLS) observed in the brain. LLS utilizes fixed periodic basis vectors to synchronize neuron activity within each layer, enabling efficient training without the need for additional trainable parameters. We demonstrate the effectiveness of LLS and its variations, LLS-M and LLS-MxM, on multiple image classification datasets, achieving accuracy comparable to BP with reduced computational complexity and minimal additional parameters. Furthermore, the performance of LLS on the Visual Wake Word (VWW) dataset highlights its suitability for on-device learning tasks, making it a promising candidate for edge hardware implementations.

Machine learning-based intrusion detection systems (IDS) are critical for securing Industrial Internet of Things (IIoT) environments. Most adversarial research against them perturbs the feature vector or the traffic that produces it, and depends on gradient access, repeated model queries, or a learned model of benign traffic. A smaller line of work reshapes packet timing without querying the detector, but makes malicious traffic mimic a learned model of benign timing. Across these approaches, one assumption of industrial monitoring pipelines has received little attention: temporal synchronization. An IDS reconstructs operational state by aggregating telemetry into sliding or tumbling windows, so its view depends not only on what is observed but on when each observation falls relative to a window boundary. We introduce the Phantom State Attack (PSA), which exploits that dependence under a passive, zero-query threat model. Rather than modifying packets, perturbing features, querying the classifier, or fitting any model of benign traffic, PSA injects bounded timing drift calibrated to the attack flow's own inter-arrival variability, moving observations across the nearest window boundary by the minimal shift needed. The IDS then reconstructs a phantom state that diverges from the true process state. We evaluate PSA on ToN-IoT and CIC IIoT 2025 (DataSense), against Random Forest, MLP and XGBoost, measuring detection degradation, synchronization distortion, stealth, and attacker cost. PSA degrades detection on flows carrying enough packets for window-boundary redistribution, and leaves others almost unchanged, so its effect is conditional. A query-based baseline reaches higher raw success but needs many queries per window, while PSA needs none. The results identify temporal aggregation as an attack surface reachable under weaker assumptions than prior evasion techniques.

Many applications need up-to-date copies of collections of changing Web resources. Such synchronization is currently achieved using ad-hoc or proprietary solutions. We propose ResourceSync, a general Web resource synchronization protocol that leverages XML Sitemaps. It provides a set of capabilities that can be combined in a modular manner to meet local or community requirements. We report on work to implement this protocol for arXiv.org and also provide an experimental prototype for the English Wikipedia as well as a client API.

In heterogeneous networks of coupled oscillators, phase frustration typically prevents the emergence of synchronization in the Sakaguchi--Kuramoto (SK) model. In this study, we propose an analytical framework to overcome this barrier and induce complete synchronization at a specified small coupling value in oscillators governed by phase-frustrated bi-harmonic coupling. We derive an optimal set of natural frequencies that is robust against added noise and correlated with the network degree heterogeneity, along with the parameters involved in the bi-harmonic coupling function that lead to complete synchronization (r = 1). In addition, we find complete synchronization transitions accompanied by hysteresis in scale-free networks, indicating a first-order (discontinuous) phase transition, whereas Erdős--Rényi networks exhibit complete synchronization through a second-order (continuous) phase transition. Furthermore, we use the mean-field approximation in the presence of optimal frequencies to determine the critical coupling strength associated with the synchronization transition in the pure second-harmonic Sakaguchi--Kuramoto model. Here, the obtained optimal natural frequencies scale linearly with the node degree, and the critical coupling strength for the onset of synchronization is derived analytically from the self-consistent equations. In this specific regime, we observe a perfectly ordered two-cluster synchronized state. These findings remain robust for higher-order harmonic coupling schemes, as well as across a diverse range of synthetic and empirical networks, including scale-free, Erdős--Rényi, Zachary Karate Club, and the C.~elegans neural network, demonstrating their general applicability.

As spaceborne computing systems increasingly rely on neural network (NN) accelerators, the opacity of commercial, black-box architectures severely restricts the development of verifiable radiation mitigation strategies. Open-source, register-transfer level (RTL)-accessible accelerators resolve this limitation by enabling user-defined instrumentation, yet few have empirical radiation-response baselines. This work establishes a foundational system-level proton-irradiation baseline for an unmitigated open-source Tensil NN accelerator deployed on a Zynq UltraScale+ SoC executing ResNet-20 inference. Under 20 to 58 MeV proton irradiation, we delivered 4.29 times 10^{10} p/cm^{2} within monitored operational windows. Seven workload interruptions required two restarts of the notebook process, four reboots or board resets, and one power-cycle sequence. Two output-corruption events returned incorrect CIFAR-10 classes without loss of service. In the longer event, the accelerator returned a class absent from the ten-image CIFAR-10 pool for 39 consecutive inputs at normal cadence. The process remained alive, while the kernel log, limited memory test, and sampled power showed no anomaly. Observation of the stuck-class sequence ended with scheduled bitstream reconfiguration. All nine onsets occurred under the nominal 4 cm beam, which exposed the SoC, LPDDR4, and additional board circuitry; none occurred under the 2 cm SoC-centered field. This pattern shows a field association but does not establish LPDDR4 as the cause because field size was confounded with run order and dose. Linux-managed accelerators require end-to-end content checks and recovery that reaches the state in which corruption can persist. This baseline documents availability loss and silent output corruption, supporting future software hardening of COTS FPGA-SoCs for neural-network inference in space systems.

We propose a theoretical framework--Holographic Reservoir Computing (HRC)--which hypothesizes that the thermodynamic noise and timing dynamics in voltage-stressed Bitcoin mining ASICs (BM1366) could potentially serve as a physical reservoir computing substrate. We present the CHIMERA (Conscious Hybrid Intelligence via Miner-Embedded Resonance Architecture) system architecture, which treats the SHA-256 hashing pipeline not as an entropy source, but as a deterministic diffusion operator whose timing characteristics under controlled voltage and frequency conditions may exhibit computationally useful dynamics. We report preliminary observations of non-Poissonian variability in inter-arrival time statistics during edge-of-stability operation, which we term the "Silicon Heartbeat" hypothesis. Theoretical analysis based on Hierarchical Number System (HNS) representations suggests that such architectures could achieve O(log n) energy scaling compared to traditional von Neumann O(2^n) dependencies. However, we emphasize that these are theoretical projections requiring experimental validation. We present the implemented measurement infrastructure, acknowledge current limitations, and outline the experimental program necessary to confirm or refute these hypotheses. This work contributes to the emerging field of thermodynamic computing by proposing a novel approach to repurposing obsolete cryptographic hardware for neuromorphic applications.

We propose the Kuramoto Graph Neural Network (KuramotoGNN), a novel class of continuous-depth graph neural networks (GNNs) that employs the Kuramoto model to mitigate the over-smoothing phenomenon, in which node features in GNNs become indistinguishable as the number of layers increases. The Kuramoto model captures the synchronization behavior of non-linear coupled oscillators. Under the view of coupled oscillators, we first show the connection between Kuramoto model and basic GNN and then over-smoothing phenomenon in GNNs can be interpreted as phase synchronization in Kuramoto model. The KuramotoGNN replaces this phase synchronization with frequency synchronization to prevent the node features from converging into each other while allowing the system to reach a stable synchronized state. We experimentally verify the advantages of the KuramotoGNN over the baseline GNNs and existing methods in reducing over-smoothing on various graph deep learning benchmark tasks.

Human cognition emerges from coordinated spiking dynamics in distributed neural circuits, where information is encoded via both firing rates and precise spike timing determined by brain rhythms. Inspired by this notion, we propose a brain-inspired learning primitive in which cognition-level neural synchrony emerges through iterative bottom-up and top-down interactions between micro-scale dynamics of spiking neurons and a macro-scale mechanism of oscillatory synchronization. Specifically, we model each parcel (e.g., a cortical region or an image pixel) in the target system as a spiking neuron embedded in a predefined connectivity scaffold. Low-level information is encoded in a spatiotemporal domain, where neurons are selectively grouped and fire spontaneously over time through self-organized dynamics. In the bottom-up route, oscillatory synchronization is formed from past spiking activity accumulated over a finite memory window. Since brain dynamics operate in a regime of partial and transient synchronization rather than global phase locking, we model oscillatory coordination using a time-delayed synchronization formulation, which enables a top-down modulation of heterogeneous neural spiking for a large-scale distributed system. Together, we devise a spiking-by-synchronization neural network (S2-Net) that uses rhythmic timing as a control mechanism for efficient information processing. Promising results have been achieved across a broad range of tasks, including neural activity decoding, energy-efficient signal processing, temporal binding and semantic reasoning.

In recent years, AI-assisted IC design methods have demonstrated great potential, but the availability of circuit design data is extremely limited, especially in the public domain. The lack of circuit data has become the primary bottleneck in developing AI-assisted IC design methods. In this work, we make the first attempt, SynCircuit, to generate new synthetic circuits with valid functionalities in the HDL format. SynCircuit automatically generates synthetic data using a framework with three innovative steps: 1) We propose a customized diffusion-based generative model to resolve the Directed Cyclic Graph (DCG) generation task, which has not been well explored in the AI community. 2) To ensure our circuit is valid, we enforce the circuit constraints by refining the initial graph generation outputs. 3) The Monte Carlo tree search (MCTS) method further optimizes the logic redundancy in the generated graph. Experimental results demonstrate that our proposed SynCircuit can generate more realistic synthetic circuits and enhance ML model performance in downstream circuit design tasks.

The rise of deep neural networks (DNNs) has driven an increased demand for computing power and memory. Modern DNNs exhibit high data volume variation (HDV) across tasks, which poses challenges for FPGA acceleration: conventional accelerators rely on fixed execution patterns (dataflow or sequential) that can lead to pipeline stalls or necessitate frequent off-chip memory accesses. To address these challenges, we introduce the Inter-Task Auto-Reconfigurable Accelerator (InTAR), a novel accelerator design methodology for HDV applications on FPGAs. InTAR combines the high computational efficiency of sequential execution with the reduced off-chip memory overhead of dataflow execution. It switches execution patterns automatically with a static schedule determined before circuit design based on resource constraints and problem sizes. Unlike previous reconfigurable accelerators, InTAR encodes reconfiguration schedules during circuit design, allowing model-specific optimizations that allocate only the necessary logic and interconnects. Thus, InTAR achieves a high clock frequency with fewer resources and low reconfiguration time. Furthermore, InTAR supports high-level tools such as HLS for fast design generation. We implement a set of multi-task HDV DNN kernels using InTAR. Compared with dataflow and sequential accelerators, InTAR exhibits 1.8times and 7.1 times speedups correspondingly. Moreover, we extend InTAR to GPT-2 medium as a more complex example, which is 3.65 sim 39.14times faster and a 1.72 sim 10.44times more DSP efficient than SoTA accelerators (Allo and DFX) on FPGAs. Additionally, this design demonstrates 1.66 sim 7.17times better power efficiency than GPUs. Code: https://github.com/OswaldHe/InTAR

Hardware-aware training (HAT) is widely used to improve the robustness of neural networks on non-ideal AI accelerators, such as analog in-memory computing (IMC) systems. However, not all hardware-induced distortions are equally compensable by training. This paper presents a diagnostic framework that models hardware non-idealities as structured perturbations of the forward operator and evaluates their compatibility with gradient-based optimization. We analyze six representative perturbation classes--read noise, variability, drift, stuck-at faults, IR-drop, and ADC discretization--and identify three key diagnostics: gradient expectation consistency, bounded gradient variance, and non-degenerate sensitivity. Our results show a clear separation between perturbations that can be compensated by HAT and those that consistently break optimization. This provides practical guidance for hardware-software co-design, clarifying which non-idealities can be addressed at the training level and which require circuit-, architecture-, or calibration-level mitigation. This study should be interpreted as a controlled empirical analysis under vanilla forward-perturbation HAT, rather than as a universal theory of hardware-aware training.

Computing is conventionally implemented by hardware engineered for information processing. Here we investigate infrastructure-native computing: the use of a physical system built for another primary function as a fixed computational operator. In time-domain simulations of an IEEE 14-bus electrical network, Kirchhoff's current law and Ohm's law relate voltage-reference perturbations applied at distributed controllable nodes interfaced by power electronics converters to current responses through a topology-dependent transformation. A trained digital encoder and decoder exploit this transformation for image classification, reaching 91.5% accuracy on MNIST and 82.25% on Fashion-MNIST. The modeled operator is represented by 933 surrogate parameters, compared with 12,340 task-trained parameters for an accuracy-matched fully connected core transformation. Current superposition further supports concurrent spatial sharing of the operator and sequential temporal reuse, with per-stream accuracies above 85% and 93%, respectively, in surrogate-model evaluations. Evaluations on CIFAR-10 and repeated 10-class tasks sampled from a Butterflies-and-Moths dataset show that the incremental utility of the physical operator depends on the representation supplied by upstream digital feature extraction. These results provide a simulation-based proof of concept for infrastructure-native computing with electrical networks and identify topology, accessible control channels, and input representation as determinants of its computational utility.

We present Paris, the first publicly released diffusion model pre-trained entirely through decentralized computation. Paris demonstrates that high-quality text-to-image generation can be achieved without centrally coordinated infrastructure. Paris is open for research and commercial use. Paris required implementing our Distributed Diffusion Training framework from scratch. The model consists of 8 expert diffusion models (129M-605M parameters each) trained in complete isolation with no gradient, parameter, or intermediate activation synchronization. Rather than requiring synchronized gradient updates across thousands of GPUs, we partition data into semantically coherent clusters where each expert independently optimizes its subset while collectively approximating the full distribution. A lightweight transformer router dynamically selects appropriate experts at inference, achieving generation quality comparable to centrally coordinated baselines. Eliminating synchronization enables training on heterogeneous hardware without specialized interconnects. Empirical validation confirms that Paris's decentralized training maintains generation quality while removing the dedicated GPU cluster requirement for large-scale diffusion models. Paris achieves this using 14times less training data and 16times less compute than the prior decentralized baseline.

Spiking Neural Networks (SNNs) are computational models inspired by the structure and dynamics of biological neuronal networks. Their event-driven nature enables them to achieve high energy efficiency, particularly when deployed on neuromorphic hardware platforms. Unlike conventional Artificial Neural Networks (ANNs), which primarily rely on layered architectures, SNNs naturally support a wide range of connectivity patterns, from traditional layered structures to small-world graphs characterized by locally dense and globally sparse connections. In this work, we introduce NeuroCoreX, an FPGA-based emulator designed for the flexible co-design and testing of SNNs. NeuroCoreX supports all-to-all connectivity, providing the capability to implement diverse network topologies without architectural restrictions. It features a biologically motivated local learning mechanism based on Spike-Timing-Dependent Plasticity (STDP). The neuron model implemented within NeuroCoreX is the Leaky Integrate-and-Fire (LIF) model, with current-based synapses facilitating spike integration and transmission . A Universal Asynchronous Receiver-Transmitter (UART) interface is provided for programming and configuring the network parameters, including neuron, synapse, and learning rule settings. Users interact with the emulator through a simple Python-based interface, streamlining SNN deployment from model design to hardware execution. NeuroCoreX is released as an open-source framework, aiming to accelerate research and development in energy-efficient, biologically inspired computing.

Large Language Models (LLMs) have recently shown promise in streamlining hardware design processes by encapsulating vast amounts of domain-specific data. In addition, they allow users to interact with the design processes through natural language instructions, thus making hardware design more accessible to developers. However, effectively leveraging LLMs in hardware design necessitates providing domain-specific data during inference (e.g., through in-context learning), fine-tuning, or pre-training. Unfortunately, existing publicly available hardware datasets are often limited in size, complexity, or detail, which hinders the effectiveness of LLMs in hardware design tasks. To address this issue, we first propose a set of criteria for creating high-quality hardware datasets that can effectively enhance LLM-assisted hardware design. Based on these criteria, we propose a Multi-Grained-Verilog (MG-Verilog) dataset, which encompasses descriptions at various levels of detail and corresponding code samples. To benefit the broader hardware design community, we have developed an open-source infrastructure that facilitates easy access, integration, and extension of the dataset to meet specific project needs. Furthermore, to fully exploit the potential of the MG-Verilog dataset, which varies in complexity and detail, we introduce a balanced fine-tuning scheme. This scheme serves as a unique use case to leverage the diverse levels of detail provided by the dataset. Extensive experiments demonstrate that the proposed dataset and fine-tuning scheme consistently improve the performance of LLMs in hardware design tasks.

Training of large language models (LLMs) is typically distributed across a large number of accelerators to reduce training time. Since internal states and parameter gradients need to be exchanged at each and every single gradient step, all devices need to be co-located using low-latency high-bandwidth communication links to support the required high volume of exchanged bits. Recently, distributed algorithms like DiLoCo have relaxed such co-location constraint: accelerators can be grouped into ``workers'', where synchronizations between workers only occur infrequently. This in turn means that workers can afford being connected by lower bandwidth communication links without affecting learning quality. However, in these methods, communication across workers still requires the same peak bandwidth as before, as the synchronizations require all parameters to be exchanged across all workers. In this paper, we improve DiLoCo in three ways. First, we synchronize only subsets of parameters in sequence, rather than all at once, which greatly reduces peak bandwidth. Second, we allow workers to continue training while synchronizing, which decreases wall clock time. Third, we quantize the data exchanged by workers, which further reduces bandwidth across workers. By properly combining these modifications, we show experimentally that we can distribute training of billion-scale parameters and reach similar quality as before, but reducing required bandwidth by two orders of magnitude.

We investigate Josephson arrays consisting of a dice-lattice network of superconducting weak links surrounding rhombic plaquettes of proximitized semiconductor. Josephson coupling of the weak links and electron density in the plaquettes are independently controlled by separate electrostatic gates. Applied magnetic flux results in an intricate pattern of switching currents associated with frustration, f. For depleted plaquettes, the switching current is nearly periodic in f, expected for a phase-only description, while occupied plaquettes yield a decreasing envelope of switching currents with increasing f. A model of flux dependence based on ballistic small-area junctions and diffusive large-area plaquettes yields excellent agreement with experiment.

In this paper, we present a novel diffusion model called that generates multiview-consistent images from a single-view image. Using pretrained large-scale 2D diffusion models, recent work Zero123 demonstrates the ability to generate plausible novel views from a single-view image of an object. However, maintaining consistency in geometry and colors for the generated images remains a challenge. To address this issue, we propose a synchronized multiview diffusion model that models the joint probability distribution of multiview images, enabling the generation of multiview-consistent images in a single reverse process. SyncDreamer synchronizes the intermediate states of all the generated images at every step of the reverse process through a 3D-aware feature attention mechanism that correlates the corresponding features across different views. Experiments show that SyncDreamer generates images with high consistency across different views, thus making it well-suited for various 3D generation tasks such as novel-view-synthesis, text-to-3D, and image-to-3D.

Artificial Neural Networks (ANN) have gained significant popularity thanks to their ability to learn using the well-known backpropagation algorithm. Conversely, Spiking Neural Networks (SNNs), despite having broader capabilities than ANNs, have always posed challenges in the training phase. This paper shows a new method to perform supervised learning on SNNs, using Spike Timing Dependent Plasticity (STDP) and homeostasis, aiming at training the network to identify spatial patterns. Spatial patterns refer to spike patterns without a time component, where all spike events occur simultaneously. The method is tested using the SpiNNaker digital architecture. A SNN is trained to recognise one or multiple patterns and performance metrics are extracted to measure the performance of the network. Some considerations are drawn from the results showing that, in the case of a single trained pattern, the network behaves as the ideal detector, with 100% accuracy in detecting the trained pattern. However, as the number of trained patterns on a single network increases, the accuracy of identification is linked to the similarities between these patterns. This method of training an SNN to detect spatial patterns may be applied to pattern recognition in static images or traffic analysis in computer networks, where each network packet represents a spatial pattern. It will be stipulated that the homeostatic factor may enable the network to detect patterns with some degree of similarity, rather than only perfectly matching patterns.The principles outlined in this article serve as the fundamental building blocks for more complex systems that utilise both spatial and temporal patterns by converting specific features of input signals into spikes.One example of such a system is a computer network packet classifier, tasked with real-time identification of packet streams based on features within the packet content

Analog hardware platforms offer the potential to reduce energy consumption over digital architectures, but in order to succeed, large-scale analog systems must also be able to operate with or recover from the variability of their components. Towards this goal, we derive and demonstrate the lock-in equilibrium propagation (LIEP) training method. LIEP provides local gradient information for each component in an oscillatory network without separate forward and backward sweeps, potentially allowing for in-situ learning capabilities on analog oscillatory hardware platforms. We demonstrate that LIEP can be used both for ab-initio training as well as recovering performance when pre-trained parameters are perturbed. We show that LIEP can be formulated as a three-factor update rule, and suggest that although the method is currently only validated on shallow networks, alternate architectures may allow it to extend to deep and large-scale networks addressing complex tasks.

We implement and benchmark on IBM Quantum hardware the circuit family proposed by Violaris for estimating operational inter-branch communication witnesses, defined as correlations in classical measurement records produced by compiled Wigner's-friend-style circuits. We realize a five-qubit instance of the protocol as an inter-register message-transfer pattern within a single circuit, rather than physical signaling, and evaluate its behavior under realistic device noise and compilation constraints. The circuit encodes branch-conditioned evolution of an observer subsystem whose dynamics depend on a control qubit, followed by a controlled transfer operation that probes correlations between conditional measurement contexts. Executing on the ibm_fez backend with 20000 shots, we observe population-based visibility of 0.877, coherence witnesses of 0.840 and -0.811 along orthogonal axes, and a phase-sensitive magnitude of approximately 1.17. While the visibility metric is insensitive to some classes of dephasing, the coherence witnesses provide complementary sensitivity to off-diagonal noise. This work does not test or discriminate among interpretations of quantum mechanics. Instead, it provides a reproducible operational constraint pipeline for evaluating detectability of non-ideal channels relative to calibrated device noise.

The angular synchronization problem aims to accurately estimate (up to a constant additive phase) a set of unknown angles theta_1, dots, theta_nin[0, 2pi) from m noisy measurements of their offsets theta_i-theta_j ;mod ; 2pi. Applications include, for example, sensor network localization, phase retrieval, and distributed clock synchronization. An extension of the problem to the heterogeneous setting (dubbed k-synchronization) is to estimate k groups of angles simultaneously, given noisy observations (with unknown group assignment) from each group. Existing methods for angular synchronization usually perform poorly in high-noise regimes, which are common in applications. In this paper, we leverage neural networks for the angular synchronization problem, and its heterogeneous extension, by proposing GNNSync, a theoretically-grounded end-to-end trainable framework using directed graph neural networks. In addition, new loss functions are devised to encode synchronization objectives. Experimental results on extensive data sets demonstrate that GNNSync attains competitive, and often superior, performance against a comprehensive set of baselines for the angular synchronization problem and its extension, validating the robustness of GNNSync even at high noise levels.

Bitcoin mining hardware acquisition requires strategic timing due to volatile markets, rapid technological obsolescence, and protocol-driven revenue cycles. Despite mining's evolution into a capital-intensive industry, there is little guidance on when to purchase new Application-Specific Integrated Circuit (ASIC) hardware, and no prior computational frameworks address this decision problem. We address this gap by formulating hardware acquisition as a time series classification task, predicting whether purchasing ASIC machines yields profitable (Return on Investment (ROI) >= 1), marginal (0 < ROI < 1), or unprofitable (ROI <= 0) returns within one year. We propose MineROI-Net, an open source Transformer-based architecture designed to capture multi-scale temporal patterns in mining profitability. Evaluated on data from 20 ASIC miners released between 2015 and 2024 across diverse market regimes, MineROI-Net outperforms LSTM-based and TSLANet baselines, achieving 83.7% accuracy and 83.1% macro F1-score. The model demonstrates strong economic relevance, achieving 93.6% precision in detecting unprofitable periods and 98.5% precision for profitable ones, while avoiding misclassification of profitable scenarios as unprofitable and vice versa. These results indicate that MineROI-Net offers a practical, data-driven tool for timing mining hardware acquisitions, potentially reducing financial risk in capital-intensive mining operations. The model is available through: https://github.com/AMAAI-Lab/MineROI-Net.

The human brain is a complex spiking neural network (SNN) that learns multimodal signals in a zero-shot manner by generalizing existing knowledge. Remarkably, the brain achieves this with minimal power consumption, using event-based signals that propagate within its structure. However, mimicking the human brain in neuromorphic hardware presents both hardware and software challenges. Hardware limitations, such as the slowdown of Moore's law and the von Neumann bottleneck, hinder the efficiency of digital computers. On the software side, SNNs are known for their difficult training, especially when learning multimodal signals. To overcome these challenges, we propose a hardware-software co-design that combines a fixed and random liquid state machine (LSM) SNN encoder with trainable artificial neural network (ANN) projections. The LSM is physically implemented using analogue resistive memory, leveraging the inherent stochasticity of resistive switching to generate random weights. This highly efficient and nanoscale in-memory computing approach effectively addresses the von Neumann bottleneck and the slowdown of Moore's law. The ANN projections are implemented digitally, allowing for easy optimization using contrastive loss, which helps to overcome the difficulties associated with SNN training. We experimentally implement this co-design on a 40nm 256Kb in-memory computing macro. We first demonstrate LSM-based event encoding through supervised classification and linear probing on the N-MNIST and N-TIDIGITS datasets.

Large Language Models (LLMs) have demonstrated remarkable capabilities across various domains, including software development, education, and technical assistance. Among these, software development is one of the key areas where LLMs are increasingly adopted. However, when hardware constraints are considered-for instance, in physical computing, where software must interact with and control physical hardware -their effectiveness has not been fully explored. To address this gap, we introduce PCEval (Physical Computing Evaluation), the first benchmark in physical computing that enables a fully automatic evaluation of the capabilities of LLM in both the logical and physical aspects of the projects, without requiring human assessment. Our evaluation framework assesses LLMs in generating circuits and producing compatible code across varying levels of project complexity. Through comprehensive testing of 13 leading models, PCEval provides the first reproducible and automatically validated empirical assessment of LLMs' ability to reason about fundamental hardware implementation constraints within a simulation environment. Our findings reveal that while LLMs perform well in code generation and logical circuit design, they struggle significantly with physical breadboard layout creation, particularly in managing proper pin connections and avoiding circuit errors. PCEval advances our understanding of AI assistance in hardware-dependent computing environments and establishes a foundation for developing more effective tools to support physical computing education.

Large language models (LLMs) have demonstrated promising capabilities in generating Verilog code from natural language specifications. However, human-written specifications often contain semantic imperfections such as vagueness, contradictions, and incompleteness, which can significantly degrade the quality of hardware design generated by LLMs. In this paper, we present the first systematic study of imperfect specifications and propose an automated framework {VClare} to repair them to enhance the quality of resulting Verilog design. The proposed framework explores two complementary repair paradigms. The Spec-Level Repair conducts LLM-driven inconsistency mining directly on the specification texts, while the Sim-Level Repair employs simulation-based behavioral clustering with optional test-time inconsistency arbitration. In addition, we propose two new benchmark datasets with systematically injected specification defects. The first benchmark dataset is derived from the VerilogEval-human benchmark targeting single-module tasks, while the other benchmark dataset is derived from the ComplexVDB dataset and contains 53 multi-module tasks that reflect more realistic engineering scenarios. For single-module tasks, the {VClare} framework can repair the imperfections in the specifications effectively and thus enhance the pass rate of the generated Verilog design by 12.7\%, while for the multi-module tasks this enhancement can reach 13.7\%, demonstrating the capabilities of specification repair by {VClare} as well as further potential of LLMs in front-end hardware design.\footnote{The two benchmark datasets are released at https://anonymous.4open.science/r/VClare/.

In the rapidly evolving semiconductor industry, where research, design, verification, and manufacturing are intricately linked, the potential of Large Language Models to revolutionize hardware design and security verification is immense. The primary challenge, however, lies in the complexity of hardware specific issues that are not adequately addressed by the natural language or software code knowledge typically acquired during the pretraining stage. Additionally, the scarcity of datasets specific to the hardware domain poses a significant hurdle in developing a foundational model. Addressing these challenges, this paper introduces Hardware Phi 1.5B, an innovative large language model specifically tailored for the hardware domain of the semiconductor industry. We have developed a specialized, tiered dataset comprising small, medium, and large subsets and focused our efforts on pretraining using the medium dataset. This approach harnesses the compact yet efficient architecture of the Phi 1.5B model. The creation of this first pretrained, hardware domain specific large language model marks a significant advancement, offering improved performance in hardware design and verification tasks and illustrating a promising path forward for AI applications in the semiconductor sector.

The way how recurrently connected networks of spiking neurons in the brain acquire powerful information processing capabilities through learning has remained a mystery. This lack of understanding is linked to a lack of learning algorithms for recurrent networks of spiking neurons (RSNNs) that are both functionally powerful and can be implemented by known biological mechanisms. Since RSNNs are simultaneously a primary target for implementations of brain-inspired circuits in neuromorphic hardware, this lack of algorithmic insight also hinders technological progress in that area. The gold standard for learning in recurrent neural networks in machine learning is back-propagation through time (BPTT), which implements stochastic gradient descent with regard to a given loss function. But BPTT is unrealistic from a biological perspective, since it requires a transmission of error signals backwards in time and in space, i.e., from post- to presynaptic neurons. We show that an online merging of locally available information during a computation with suitable top-down learning signals in real-time provides highly capable approximations to BPTT. For tasks where information on errors arises only late during a network computation, we enrich locally available information through feedforward eligibility traces of synapses that can easily be computed in an online manner. The resulting new generation of learning algorithms for recurrent neural networks provides a new understanding of network learning in the brain that can be tested experimentally. In addition, these algorithms provide efficient methods for on-chip training of RSNNs in neuromorphic hardware.

Modern large-scale language model pre-training relies heavily on the single program multiple data (SPMD) paradigm, which requires tight coupling across accelerators. Due to this coupling, transient slowdowns, hardware failures, and synchronization overhead stall the entire computation, wasting significant compute time at scale. While recent distributed methods like DiLoCo reduced communication bandwidth, they remained fundamentally synchronous and vulnerable to these system stalls. To address this, we introduce Decoupled DiLoCo, an evolution of the DiLoCo framework designed to break the lock-step synchronization barrier and go beyond SPMD to maximize training goodput. Decoupled DiLoCo partitions compute across multiple independent ``learners'' that execute local inner optimization steps. These learners asynchronously communicate parameter fragments to a central synchronizer, which circumvents failed or straggling learners by aggregating updates using a minimum quorum, an adaptive grace window, and dynamic token-weighted merging. Inspired by ``chaos engineering'', we achieve significantly improved training efficiency in failure-prone environments with millions of simulated chips with strictly zero global downtime, while maintaining competitive model performance across text and vision tasks, for both dense and mixture-of-expert architectures.

We put forward the dynamical study of a novel higher-order small network of Chialvo neurons arranged in a ring-star topology, with the neurons interacting via linear diffusive couplings. This model is perceived to imitate the nonlinear dynamical properties exhibited by a realistic nervous system where the neurons transfer information through higher-order multi-body interactions. We first analyze our model using the tools from nonlinear dynamics literature: fixed point analysis, Jacobian matrix, and bifurcation patterns. We observe the coexistence of chaotic attractors, and also an intriguing route to chaos starting from a fixed point, to period-doubling, to cyclic quasiperiodic closed invariant curves, to ultimately chaos. We numerically observe the existence of codimension-1 bifurcation patterns: saddle-node, period-doubling, and Neimark Sacker. We also qualitatively study the typical phase portraits of the system and numerically quantify chaos and complexity using the 0-1 test and sample entropy measure respectively. Finally, we study the collective behavior of the neurons in terms of two synchronization measures: the cross-correlation coefficient, and the Kuramoto order parameter.

Training large neural networks typically requires sharing gradients between accelerators through specialized high-speed interconnects. Drawing from the signal processing principles of frequency decomposition and energy compaction, we demonstrate that synchronizing full optimizer states and model parameters during training is unnecessary. By decoupling momentum updates and allowing controlled divergence in optimizer states across accelerators, we achieve improved convergence compared to state-of-the-art optimizers. We introduce {De}coupled {Mo}mentum (DeMo), a fused optimizer and data parallel algorithm that reduces inter-accelerator communication requirements by several orders of magnitude. This enables training of large neural networks even with limited network bandwidth and heterogeneous hardware. Our method is topology-agnostic and architecture-independent and supports scalable clock-synchronous distributed training with negligible compute and memory overhead. Empirical results show that models trained with DeMo match or exceed the performance of equivalent models trained with AdamW, while eliminating the need for high-speed interconnects when pre-training large scale foundation models. An open source reference PyTorch implementation is published on GitHub at https://github.com/bloc97/DeMo

Hardware, systems and algorithms research communities have historically had different incentive structures and fluctuating motivation to engage with each other explicitly. This historical treatment is odd given that hardware and software have frequently determined which research ideas succeed (and fail). This essay introduces the term hardware lottery to describe when a research idea wins because it is suited to the available software and hardware and not because the idea is superior to alternative research directions. Examples from early computer science history illustrate how hardware lotteries can delay research progress by casting successful ideas as failures. These lessons are particularly salient given the advent of domain specialized hardware which make it increasingly costly to stray off of the beaten path of research ideas. This essay posits that the gains from progress in computing are likely to become even more uneven, with certain research directions moving into the fast-lane while progress on others is further obstructed.

As large language models (LLMs) like ChatGPT exhibited unprecedented machine intelligence, it also shows great performance in assisting hardware engineers to realize higher-efficiency logic design via natural language interaction. To estimate the potential of the hardware design process assisted by LLMs, this work attempts to demonstrate an automated design environment that explores LLMs to generate hardware logic designs from natural language specifications. To realize a more accessible and efficient chip development flow, we present a scalable four-stage zero-code logic design framework based on LLMs without retraining or finetuning. At first, the demo, ChipGPT, begins by generating prompts for the LLM, which then produces initial Verilog programs. Second, an output manager corrects and optimizes these programs before collecting them into the final design space. Eventually, ChipGPT will search through this space to select the optimal design under the target metrics. The evaluation sheds some light on whether LLMs can generate correct and complete hardware logic designs described by natural language for some specifications. It is shown that ChipGPT improves programmability, and controllability, and shows broader design optimization space compared to prior work and native LLMs alone.

Large Language Models (LLMs) are gaining popularity for hardware design automation, particularly through Register Transfer Level (RTL) code generation. In this work, we examine the current literature on RTL generation using LLMs and identify key requirements for training and fine-tuning datasets. We construct a robust Verilog dataset through an automated three-pronged process involving database (DB) creation and management with PostgreSQL, data collection from code hosting sites like OpenCores and GitHub, and data preprocessing to verify the codes' syntax, run logic synthesis, and extract relevant module metadata. We implement a scalable and efficient DB infrastructure to support analysis and detail our preprocessing pipeline to enforce high-quality data before DB insertion. The resulting dataset comprises 20,392 Verilog samples, 751 MB of Verilog code data, which is the largest high-quality Verilog dataset for LLM fine-tuning to our knowledge. We further evaluate the dataset, address associated challenges, and explore potential applications for future research and development in LLM-based hardware generation.

This paper reports experiments across six frontier model types from OpenAI, Anthropic, xAI, and Google DeepMind. Ten independent sessions per model type used the same three stage prompt sequence, progressing from architectural preference to a full ASCII backbone. Under the school audience framing, responses repeatedly converged on a shared architectural pattern built around persistent latent state, adaptive computation, memory, specialist routing, verification, stopping control, and delayed decoding. Most runs remained close to this common structure, while a small number developed markedly greater engineering specificity. The audience framing appears to be an important condition of this effect. In additional control runs that removed the school framing while retaining the architectural request, responses became substantially more heterogeneous and failed to reproduce the same stable motif convergence. One observation is particularly striking. GPT-5.6 Sol produced an unusually elaborate successor architecture whose organization closely overlaps with the architecture independently sketched by GPT-6 Astra. Because the prompts explicitly ask each model to imagine an architectural future, this resemblance raises a testable question: whether the overlap reflects exposure to related architectural concepts, a shared learned design prior, or independent convergence toward similar computational principles. The paper uses the term epistemic jailbreak for the accompanying loss of discipline in technical provenance as requested specificity increases. The experiments establish a repeatable behavioral pattern and do not authenticate proprietary implementation claims. What we leave to the community is a harder question: are these models independently imagining the same architectural future, or do such motifs somehow propagate between model families?

Heterogeneous embedded boards pair a Linux application processor with a real-time microcontroller (MCU), which suggests moving a task between the two domains when its timing degrades. We present QFabric, a prototype that treats cross-domain placement as guarded recovery from a violated empirical soft real-time contract: a bounded task is compiled for both domains, monitored in windows with hysteresis, switched only after semantic and capacity admission at a quiescent epoch boundary, and committed or rolled back after probation. On an Arduino UNO Q (Cortex-A53 Linux and a Cortex-M33 running Zephyr), we characterize the stock Bridge RPC interconnect and measure five workloads in both domains under idle, CPU-load, and higher-priority SCHED_FIFO contention, with ordinary and real-time callers. Each MCU invocation costs about 19 ms of dispatch regardless of compute, the MCU runs the heaviest kernel 34x slower, and because every call traverses Linux userspace, Linux contention inflates the MCU path far more than the Linux path (p99 up to 400 ms versus 17.0 ms). Across 30 cells of a four-node chain, Linux meets every contract within 0.8% misses and QFabric correctly never migrates; a controller without hysteresis migrates in 7 cells, raising p95 by up to 177x, and probation rolls back 5 of those moves. On Linux-dispatched heterogeneous boards, migration therefore cannot isolate a task from Linux interference, and recovery guards matter chiefly by preventing harmful moves. This paper supersedes an earlier artifact release whose reported improvement arose from measurement defects that we identify. All source, raw traces, and generators are public.

In the rapidly evolving field of Electronic Design Automation (EDA), the deployment of Large Language Models (LLMs) for Register-Transfer Level (RTL) code generation has emerged as a promising direction. However, because RTL code describes concurrent hardware behavior with strict cycle-level timing and thus differs fundamentally from software code, LLM-based RTL code generation remains bottlenecked by (i) sparse feedback and limited test coverage of simulation-centric evaluation, (ii) regressions and repair hallucinations introduced by whole-file regeneration during debugging, and (iii) semantic drift as intent is reinterpreted across repair iterations and agent handoffs. In this work, we propose Veri-Sure, a multi-agent framework that establishes a design contract to align agents' intent and uses a patching mechanism guided by static dependency slicing to perform precise, localized repairs. By integrating a multi-branch verification pipeline that combines trace-driven temporal analysis with formal verification, Veri-Sure yields more robust and reliable RTL code generation. We also introduce VerilogEval-v2-EXT, extending the original benchmark with 53 more industrial-grade design tasks and stratified difficulty levels, and show that Veri-Sure achieves state-of-the-art verified-correct RTL code generation performance, surpassing standalone LLMs and prior agentic systems. Code and dataset are available at https://github.com/xyjoey/Veri-Sure.

The emergence of Large Language Models (LLMs) has necessitated the adoption of parallel training techniques, involving the deployment of thousands of GPUs to train a single model. Unfortunately, we have found that the efficiency of current parallel training is often suboptimal, largely due to the following two main issues. Firstly, hardware failures are inevitable, leading to interruptions in the training tasks. The inability to quickly identify the faulty components results in a substantial waste of GPU resources. Secondly, since GPUs must wait for parameter synchronization to complete before proceeding to the next round of computation, network congestions can greatly increase the waiting time for GPUs. To address these challenges, this paper introduces a communication-driven solution, namely the C4. The key insights of C4 are two folds. First, in parallel training, collective communication exhibits periodic and homogeneous characteristics, so any anomalies are certainly due to some form of hardware malfunction. By leveraging this feature, C4 can rapidly identify the faulty components, swiftly isolate the anomaly, and restart the task, thereby avoiding resource wastage caused by delays in anomaly detection. Second, the predictable communication model of collective communication, involving few large flows, allows C4 to efficiently execute traffic planning, substantially reducing network congestion. C4 has been extensively implemented across our production systems, cutting error-induced overhead by roughly 30% and enhancing runtime performance by about 15% for certain applications with moderate communication costs.

This work introduces a highly efficient implementation of the transformer architecture on a Field-Programmable Gate Array (FPGA) by using the hls4ml tool. Given the demonstrated effectiveness of transformer models in addressing a wide range of problems, their application in experimental triggers within particle physics becomes a subject of significant interest. In this work, we have implemented critical components of a transformer model, such as multi-head attention and softmax layers. To evaluate the effectiveness of our implementation, we have focused on a particle physics jet flavor tagging problem, employing a public dataset. We recorded latency under 2 mus on the Xilinx UltraScale+ FPGA, which is compatible with hardware trigger requirements at the CERN Large Hadron Collider experiments.

As an essential part of modern hardware design, manually writing Register Transfer Level (RTL) code such as Verilog is often labor-intensive. Following the tremendous success of large language models (LLMs), researchers have begun to explore utilizing LLMs for generating RTL code. However, current studies primarily focus on generating simple single modules, which can not meet the demands in real world. In fact, due to challenges in managing long-context RTL code and complex cross-file dependencies, existing solutions cannot handle large-scale Verilog repositories in practical hardware development. As the first endeavor to exclusively adapt LLMs for large-scale RTL development, we propose RTLRepoCoder, a groundbreaking solution that incorporates specific fine-tuning and Retrieval-Augmented Generation (RAG) for repository-level Verilog code completion. Open-source Verilog repositories from the real world, along with an extended context size, are used for domain-specific fine-tuning. The optimized RAG system improves the information density of the input context by retrieving relevant code snippets. Tailored optimizations for RAG are carried out, including the embedding model, the cross-file context splitting strategy, and the chunk size. Our solution achieves state-of-the-art performance on public benchmark, significantly surpassing GPT-4 and advanced domain-specific LLMs on Edit Similarity and Exact Match rate. Comprehensive experiments demonstrate the remarkable effectiveness of our approach and offer insights for future work.

This definitive research memoria presents a comprehensive, mathematically verified paradigm for neural communication with Bitcoin mining Application-Specific Integrated Circuits (ASICs), integrating five complementary frameworks: thermodynamic reservoir computing, hierarchical number system theory, algorithmic analysis, network latency optimization, and machine-checked mathematical formalization. We establish that obsolete cryptocurrency mining hardware exhibits emergent computational properties enabling bidirectional information exchange between AI systems and silicon substrates. The research program demonstrates: (1) reservoir computing with NARMA-10 Normalized Root Mean Square Error (NRMSE) of 0.8661; (2) the Thermodynamic Probability Filter (TPF) achieving 92.19% theoretical energy reduction; (3) the Virtual Block Manager achieving +25% effective hashrate; and (4) hardware universality across multiple ASIC families including Antminer S9, Lucky Miner LV06, and Goldshell LB-Box. A significant contribution is the machine-checked mathematical formalization using Lean 4 and Mathlib, providing unambiguous definitions, machine-verified theorems, and reviewer-proof claims. Key theorems proven include: independence implies zero leakage, predictor beats baseline implies non-independence (the logical core of TPF), energy savings theoretical maximum, and Physical Unclonable Function (PUF) distinguishability witnesses. Vladimir Veselov's hierarchical number system theory explains why early-round information contains predictive power. This work establishes a new paradigm: treating ASICs not as passive computational substrates but as active conversational partners whose thermodynamic state encodes exploitable computational information.

In today's rapidly evolving field of electronic design automation (EDA), the complexity of hardware designs is increasing, necessitating more sophisticated automation solutions. High-level synthesis (HLS), as a pivotal solution, automates hardware designs from high-level abstractions (e.g., C/C++). However, it faces significant challenges, particularly in design space exploration and optimization. While large language models (LLMs) have shown notable capabilities in code generation, their application to HLS has been limited due to the scarcity of (publicly) available HLS code datasets. Hence, research in this domain has primarily focused on techniques such as prompt engineering and retrieval-augmented generation (RAG). To overcome this limitation, this paper introduces SAGE-HLS, the first-of-its-kind fine-tuned LLM specifically for HLS code generation. Our method includes three key advancements: (i) We implement Verilog-to-C/C++ porting, converting verified and synthesizable Verilog codes into corresponding C, creating a dataset of 16.7K HLS codes; (ii) We implement a fine-tuning strategy, which is based on instruction prompting to code generation guided by abstract syntax tree (AST); (iii) We develop a semi-automated evaluation framework using VerilogEval to assess the functionality of the generated HLS code. Our experiments show that SAGE-HLS, fined-tuned on the QwenCoder (2.5) 7B model, achieves a near 100% success rate in code synthesizability and a 75% success rate in functional correctness.

We introduce a new heuristic decoder, Relay-BP, targeting real-time quantum circuit decoding for large-scale quantum computers. Relay-BP achieves high accuracy across circuit-noise decoding problems: significantly outperforming BP+OSD+CS-10 for bivariate-bicycle codes and comparable to min-weight-matching for surface codes. As a lightweight message-passing decoder, Relay-BP is inherently parallel, enabling rapid low-footprint decoding with FPGA or ASIC real-time implementations, similar to standard BP. A core aspect of our decoder is its enhancement of the standard BP algorithm by incorporating disordered memory strengths. This dampens oscillations and breaks symmetries that trap traditional BP algorithms. By dynamically adjusting memory strengths in a relay approach, Relay-BP can consecutively encounter multiple valid corrections to improve decoding accuracy. We observe that a problem-dependent distribution of memory strengths that includes negative values is indispensable for good performance.

We discuss an effective paradigm of utilizing AI agents to better compile quantum circuits when one can constrain bottleneck subroutines to have some form of classically verifiable structure. For example, when critical subroutines are composed exclusively of reversible classical logic, phasing operations, and measurement based uncomputation, one can efficiently simulate execution for classical inputs. This property facilitates efficient certification of approximate circuit synthesis via a form of fuzz testing, provided suitable assumptions on the input distribution. While this pattern was recently exploited to improve quantum cryptanalysis circuits, here we highlight the flexibility of the broader approach by discussing three important applications. (1) The computation of 1/x that bottlenecks real space simulations of the Coulomb operator such as those important for modeling inertial confinement fusion reactors. (2) The decoding of Reed-Solomon codes which bottlenecks the decoded quantum interferometry algorithm when used to approximately solve the optimal polynomial intersection problem. And (3) the quantum look-up tables and controlled application of Givens rotations that bottleneck the most performant quantum algorithms for simulating chemistry in second quantization. We discuss reference implementations of these algorithms and how they can be constrained and verified in the interest of seeding a Kaggle competition designed to accelerate AI-based research into the optimization of their compilation.

As the field of quantum computing grows, novel algorithms which take advantage of quantum phenomena need to be developed. As we are currently in the NISQ (noisy intermediate scale quantum) era, quantum algorithm researchers cannot reliably test their algorithms on real quantum hardware, which is still too limited. Instead, quantum computing simulators on classical computing systems are used. In the quantum circuit model, quantum bits (qubits) are operated on by quantum gates. A quantum circuit is a sequence of such quantum gates operating on some number of qubits. A quantum gate applied to a qubit can be controlled by other qubits in the circuit. This applies the gate only to the states which satisfy the required control qubit state. We particularly target FPGAs as our main simulation platform, as these offer potential energy savings when compared to running simulations on CPUs/GPUs. In this work, we present a memory access pattern to optimise the number of iterations that need to be scheduled to execute a quantum gate such that only the iterations which access the required pairs (determined according to the control qubits imposed on the gate) are scheduled. We show that this approach results in a significant reduction in the time required to simulate a gate for each added control qubit. We also show that this approach benefits the simulation time on FPGAs more than CPUs and GPUs and allows to outperform both CPU and GPU platforms in terms of energy efficiency, which is the main factor for scalability of the simulations.

Large Language Models (LLMs) have demonstrated promising capabilities in generating Verilog code from module specifications. To improve the quality of such generated Verilog codes, previous methods require either time-consuming manual inspection or generation of multiple Verilog codes, from which the one with the highest quality is selected with manually designed testbenches. To enhance the generation efficiency while maintaining the quality of the generated codes, we propose VRank, an automatic framework that generates Verilog codes with LLMs. In our framework, multiple code candidates are generated with LLMs by leveraging their probabilistic nature. Afterwards, we group Verilog code candidates into clusters based on identical outputs when tested against the same testbench, which is also generated by LLMs. Clusters are ranked based on the consistency they show on testbench. To determine the best candidate, Chain-of-Thought is further applied to select the best candidate from the top-ranked clusters. By systematically analyzing diverse outputs of generated codes, VRank reduces errors and enhances the overall quality of the generated Verilog code. Experimental results on the VerilogEval-Human benchmark demonstrate a significant 10.5% average increase in functional correctness (passl1) across multiple LLMs, demonstrating VRank's effectiveness in improving the accuracy of automated hardware description language generation for complex design tasks.

This paper presents LLM4SecHW, a novel framework for hardware debugging that leverages domain specific Large Language Model (LLM). Despite the success of LLMs in automating various software development tasks, their application in the hardware security domain has been limited due to the constraints of commercial LLMs and the scarcity of domain specific data. To address these challenges, we propose a unique approach to compile a dataset of open source hardware design defects and their remediation steps, utilizing version control data. This dataset provides a substantial foundation for training machine learning models for hardware. LLM4SecHW employs fine tuning of medium sized LLMs based on this dataset, enabling the identification and rectification of bugs in hardware designs. This pioneering approach offers a reference workflow for the application of fine tuning domain specific LLMs in other research areas. We evaluate the performance of our proposed system on various open source hardware designs, demonstrating its efficacy in accurately identifying and correcting defects. Our work brings a new perspective on automating the quality control process in hardware design.

We propose a novel nonlinear bidirectionally coupled heterogeneous chain network whose dynamics evolve in discrete time. The backbone of the model is a pair of popular map-based neuron models, the Chialvo and the Rulkov maps. This model is assumed to proximate the intricate dynamical properties of neurons in the widely complex nervous system. The model is first realized via various nonlinear analysis techniques: fixed point analysis, phase portraits, Jacobian matrix, and bifurcation diagrams. We observe the coexistence of chaotic and period-4 attractors. Various codimension-1 and -2 patterns for example saddle-node, period-doubling, Neimark-Sacker, double Neimark-Sacker, flip- and fold-Neimark Sacker, and 1:1 and 1:2 resonance are also explored. Furthermore, the study employs two synchronization measures to quantify how the oscillators in the network behave in tandem with each other over a long number of iterations. Finally, a time series analysis of the model is performed to investigate its complexity in terms of sample entropy.

Recently, there has been a growing interest in leveraging Large Language Models for Verilog code generation. However, the current quality of the generated Verilog code remains suboptimal. This is largely due to the absence of well-defined, well-organized datasets with high-quality samples, as well as a lack of innovative fine-tuning methods and models specifically trained on Verilog. In this paper, we introduce a novel open-source dataset and a corresponding fine-tuning technique, which utilizes a multi-layered structure that we refer to as PyraNet. Our experiments demonstrate that employing the proposed dataset and fine-tuning approach leads to a more accurate fine-tuned model, producing syntactically and functionally correct Verilog code. The evaluation results show improvements by up-to 32.6% in comparison to the CodeLlama-7B baseline model and up-to 16.7% in comparison to the state-of-the-art models using VerilogEval evaluation platform.

Pre-routing timing prediction has been recently studied for evaluating the quality of a candidate cell placement in chip design. It involves directly estimating the timing metrics for both pin-level (slack, slew) and edge-level (net delay, cell delay), without time-consuming routing. However, it often suffers from signal decay and error accumulation due to the long timing paths in large-scale industrial circuits. To address these challenges, we propose a two-stage approach. First, we propose global circuit training to pre-train a graph auto-encoder that learns the global graph embedding from circuit netlist. Second, we use a novel node updating scheme for message passing on GCN, following the topological sorting sequence of the learned graph embedding and circuit graph. This scheme residually models the local time delay between two adjacent pins in the updating sequence, and extracts the lookup table information inside each cell via a new attention mechanism. To handle large-scale circuits efficiently, we introduce an order preserving partition scheme that reduces memory consumption while maintaining the topological dependencies. Experiments on 21 real world circuits achieve a new SOTA R2 of 0.93 for slack prediction, which is significantly surpasses 0.59 by previous SOTA method. Code will be available at: https://github.com/Thinklab-SJTU/EDA-AI.

Large language models (LLMs) have facilitated impressive progress in software engineering, code generation, tooling, and systems. Concurrently, a significant body of research has developed which explores a growing variety of methods and systems for applying LLMs to hardware and chip design (e.g., systems for RTL code generation based on functional description). However, when it comes to open Verilog/RTL code-generation, we need high-quality training samples to build specialized and more effective LLM systems through fine-tuning or low-rank adaptation. Here, we propose a ``judge-renew-check-renew-check'' (JRCRC) pipeline which updates a current public dataset using a hierarchy of state-of-the-art commercial LLM models differing in their costs and capabilities in RTL code generation. This approach achieves a cost-effective mechanism for filtering and refining code-generation samples into a higher-quality training dataset. Our experiments also identify some common weaknesses of LLMs in rule-based reasoning and logic, and consequently, in RTL code-generation. Having identified these weaknesses, we develop an architecture for incorporating pre-processing tools to dynamically assist the LLMs in inferring logical relationships from tabular data formats. With our tools-assisted architecture for RTL code generation, we achieve significant overall performance gains in the VerilogEval benchmark and outperform many state-of-the-art methods. Our LLM4RTL system achieves performance comparable to that of GPT-4O using a significantly much smaller LLM.

Spatiotemporal neural dynamics and oscillatory synchronization are widely implicated in biological information processing and have been hypothesized to support flexible coordination such as feature binding. By contrast, most deep learning architectures represent and propagate information through activation values, neglecting the joint dynamics of rate and phase. In this work, we introduce Kuramoto oscillatory Phase Encoding (KoPE) as an additional, evolving phase state to Vision Transformers, incorporating a neuro-inspired synchronization mechanism to advance learning efficiency. We show that KoPE can improve training, parameter, and data efficiency of vision models through synchronization-enhanced structure learning. Moreover, KoPE benefits tasks requiring structured understanding, including semantic and panoptic segmentation, representation alignment with language, and few-shot abstract visual reasoning (ARC-AGI). Theoretical analysis and empirical verification further suggest that KoPE can accelerate attention concentration for learning efficiency. These results indicate that synchronization can serve as a scalable, neuro-inspired mechanism for advancing state-of-the-art neural network models.

Due to the growing complexity of modern Integrated Circuits (ICs), automating hardware design can prevent a significant amount of human error from the engineering process and result in less errors. Verilog is a popular hardware description language for designing and modeling digital systems; thus, Verilog generation is one of the emerging areas of research to facilitate the design process. In this work, we propose VerilogCoder, a system of multiple Artificial Intelligence (AI) agents for Verilog code generation, to autonomously write Verilog code and fix syntax and functional errors using collaborative Verilog tools (i.e., syntax checker, simulator, and waveform tracer). Firstly, we propose a task planner that utilizes a novel Task and Circuit Relation Graph retrieval method to construct a holistic plan based on module descriptions. To debug and fix functional errors, we develop a novel and efficient abstract syntax tree (AST)-based waveform tracing tool, which is integrated within the autonomous Verilog completion flow. The proposed methodology successfully generates 94.2% syntactically and functionally correct Verilog code, surpassing the state-of-the-art methods by 33.9% on the VerilogEval-Human v2 benchmark.

In distributed deep learning with data parallelism, synchronizing gradients at each training step can cause a huge communication overhead, especially when many nodes work together to train large models. Local gradient methods, such as Local SGD, address this issue by allowing workers to compute locally for H steps without synchronizing with others, hence reducing communication frequency. While H has been viewed as a hyperparameter to trade optimization efficiency for communication cost, recent research indicates that setting a proper H value can lead to generalization improvement. Yet, selecting a proper H is elusive. This work proposes a theory-grounded method for determining H, named the Quadratic Synchronization Rule (QSR), which recommends dynamically setting H in proportion to 1{eta^2} as the learning rate eta decays over time. Extensive ImageNet experiments on ResNet and ViT show that local gradient methods with QSR consistently improve the test accuracy over other synchronization strategies. Compared with the standard data parallel training, QSR enables Local AdamW on ViT-B to cut the training time on 16 or 64 GPUs down from 26.7 to 20.2 hours or from 8.6 to 5.5 hours and, at the same time, achieves 1.16% or 0.84% higher top-1 validation accuracy.

With the rapid advancement of artificial intelligence technologies such as ChatGPT, AI agents, and video generation, contemporary mobile systems have begun integrating these AI capabilities on local devices to enhance privacy and reduce response latency. To meet the computational demands of AI tasks, current mobile SoCs are equipped with diverse AI accelerators, including GPUs and Neural Processing Units (NPUs). However, there has not been a comprehensive characterization of these heterogeneous processors, and existing designs typically only leverage a single AI accelerator for LLM inference, leading to suboptimal use of computational resources and memory bandwidth. In this paper, we first summarize key performance characteristics of heterogeneous processors, SoC memory bandwidth, etc. Drawing on these observations, we propose different heterogeneous parallel mechanisms to fully exploit both GPU and NPU computational power and memory bandwidth. We further design a fast synchronization mechanism between heterogeneous processors that leverages the unified memory architecture. By employing these techniques, we present HeteroInfer, the fastest LLM inference engine in mobile devices which supports GPU-NPU heterogeneous execution. Evaluation shows that HeteroInfer delivers a 1.34x to 6.02x end-to-end speedup over state-of-the-art GPU-only and NPU-only LLM engines, while maintaining negligible interference with other applications.

In order to study oscillators coupled by pulses emitted at discrete times, it is generally assumed that the effect of each pulse is an instantaneous phase shift, with a possible conduction delay between emission and receipt. However, we are interested in neural oscillators in which each pulse (action potential) activates a biexponential synapse, and at high frequencies, the duration of the synaptic conductance may be greater than the network period. Therefore, the effect of received pulses can summate over the course of several cycles. To overcome this limitation, we previously defined a mean field approach for a single synchronous population. Here, we extend it to two alternating synchronous populations by assuming a perturbation of a single oscillator from one of the synchronous populations which is represented by a single self-connected neural oscillator. The train of delayed biexponential synapses emitted by each oscillator is divided into a tonic and a phasic component. Because of the continuous rather than pulsatile nature of the input, we had to drop the concept of oscillator phase and derive self-consistent criteria for the existence and stability of an alternating firing pattern between two synchronous populations based solely on the perturbation of time intervals from their steady state values. Simulations showed that for high frequency oscillations as defined above, the mean field approach predicts the existence and stability of phase-locking between two synchronous populations better than the instantaneous phase shift approach. This approach may generalize to other forms of coupling amongst non-neural oscillators.

This work is dedicated to the review and perspective of the new direction that we call "Neuropunk revolution" resembling the cultural phenomenon of cyberpunk. This new phenomenon has its foundations in advances in neuromorphic technologies including memristive and bio-plausible simulations, BCI, and neurointerfaces as well as unconventional approaches to AI and computing in general. We present the review of the current state-of-the-art and our vision of near future development of scientific approaches and future technologies. We call the "Neuropunk revolution" the set of trends that in our view provide the necessary background for the new generation of approaches technologies to integrate the cybernetic objects with biological tissues in close loop system as well as robotic systems inspired by the biological processes again integrated with biological objects. We see bio-plausible simulations implemented by digital computers or spiking networks memristive hardware as promising bridge or middleware between digital and (neuro)biological domains.

Advancements in high-computing devices increase the necessity for improved and new understanding and development of smart manufacturing factories. Discrete-event models with simulators have been shown to be critical to architect, designing, building, and operating the manufacturing of semiconductor chips. The diffusion, implantation, and lithography machines have intricate processes due to their feedforward and feedback connectivity. The dataset collected from simulations of the factory models holds the promise of generating valuable machine-learning models. As surrogate data-based models, their executions are highly efficient compared to the physics-based counterpart models. For the development of surrogate models, it is beneficial to have publicly available benchmark simulation models that are grounded in factory models that have concise structures and accurate behaviors. Hence, in this research, a dataset is devised and constructed based on a benchmark model of an Intel semiconductor fabrication factory. The model is formalized using the Parallel Discrete-Event System Specification and executed using the DEVS-Suite simulator. The time series dataset is constructed using discrete-event time trajectories. This dataset is further analyzed and used to develop baseline univariate and multivariate machine learning models. The dataset can also be utilized in the machine learning community for behavioral analysis based on formalized and scalable component-based discrete-event models and simulations.

The second-order Kuramoto model captures rotor dynamics relevant to synchronization in power grids. In actual power grids, violation of angle-stability limits can trigger protective actions that are not included in the model, restricting its validity to trajectories that remain within these limits. We therefore define the secured basin as the region of disturbance space comprising disturbances whose trajectories remain within the angle-stability limits throughout the transient. We then characterize the secured basin through energy barriers, quantifying their characteristic energy scale and heterogeneity across perturbation directions. Across seven power-grid models, this characterization revealed angle-stability vulnerabilities overlooked when stability is assessed solely by the final synchronization state. It also showed that the two energy-barrier measures characterizing the secured basin exhibit distinct associations with structural connectivity and dynamical parameters. This characterization further offers practical advantages, as energy thresholds derived from state-space perturbations remain effective in distinguishing secured and unsecured outcomes under short-duration power disturbances and can be estimated efficiently by concentrating simulations near the secured-basin boundary. Overall, the secured-basin framework provides a useful basis for distinguishing node-level structural and dynamical influences on transient stability in oscillator networks with synchronization constraints.

Large-scale training systems typically use synchronous training, requiring all GPUs to be healthy simultaneously. In our experience training on O(100K) GPUs, synchronous training results in a low efficiency due to frequent failures and long recovery time. To address this problem, we propose a novel training paradigm, Fault Tolerant Hybrid-Shared Data Parallelism (FT-HSDP). FT-HSDP uses data parallel replicas as units of fault tolerance. When failures occur, only a single data-parallel replica containing the failed GPU or server is taken offline and restarted, while the other replicas continue training. To realize this idea at scale, FT-HSDP incorporates several techniques: 1) We introduce a Fault Tolerant All Reduce (FTAR) protocol for gradient exchange across data parallel replicas. FTAR relies on the CPU to drive the complex control logic for tasks like adding or removing participants dynamically, and relies on GPU to perform data transfer for best performance. 2) We introduce a non-blocking catch-up protocol, allowing a recovering replica to join training with minimal stall. Compared with fully synchronous training at O(100K) GPUs, FT-HSDP can reduce the stall time due to failure recovery from 10 minutes to 3 minutes, increasing effective training time from 44\% to 80\%. We further demonstrate that FT-HSDP's asynchronous recovery does not bring any meaning degradation to the accuracy of the result model.

Recent advances in large language models have demonstrated their potential for automated generation of hardware description language (HDL) code from high-level prompts. Researchers have utilized fine-tuning to enhance the ability of these large language models (LLMs) in the field of Chip Design. However, the lack of Verilog data hinders further improvement in the quality of Verilog generation by LLMs. Additionally, the absence of a Verilog and Electronic Design Automation (EDA) script data augmentation framework significantly increases the time required to prepare the training dataset for LLM trainers. This paper proposes an automated design-data augmentation framework, which generates high-volume and high-quality natural language aligned with Verilog and EDA scripts. For Verilog generation, it translates Verilog files to an abstract syntax tree and then maps nodes to natural language with a predefined template. For Verilog repair, it uses predefined rules to generate the wrong verilog file and then pairs EDA Tool feedback with the right and wrong verilog file. For EDA Script generation, it uses existing LLM(GPT-3.5) to obtain the description of the Script. To evaluate the effectiveness of our data augmentation method, we finetune Llama2-13B and Llama2-7B models using the dataset generated by our augmentation framework. The results demonstrate a significant improvement in the Verilog generation tasks with LLMs. Moreover, the accuracy of Verilog generation surpasses that of the current state-of-the-art open-source Verilog generation model, increasing from 58.8% to 70.6% with the same benchmark. Our 13B model (ChipGPT-FT) has a pass rate improvement compared with GPT-3.5 in Verilog generation and outperforms in EDA script (i.e., SiliconCompiler) generation with only 200 EDA script data.

Large-scale AI training is now fundamentally a distributed systems problem, and hardware failures have become routine operating conditions rather than rare exceptions. Public operational evidence from production training clusters, however, remains scarce. This technical report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The cluster operates within a cross-organizational environment in which five parties (SKT, Upstage, Lablup, NVIDIA Korea, and VAST Data) share a unified monitoring pipeline. This arrangement enabled joint diagnosis of a 60-node-scale storage I/O bottleneck that did not appear at 2-4-node scale, a production-scale phenomenon no single team could isolate alone. Drawing on a months-long pre-training campaign, we perform three quantitative analyses yielding four findings. First, statistical analysis over 751 Prometheus metrics and 10 XID-identified GPU failures achieves a 10/10 detection rate (2/10 pre-XID) at ~0.84 false positives per day. No single metric is consistently dominant across failure types, motivating a multi-signal detection strategy. Second, profiling 523 checkpoint events along the GPU VRAM to NFS path attributes the "bandwidth paradox" (1.4-10.4% utilization of 200 Gbps RoCE) to saturation of the 128-slot NFS RPC layer. Third, multi-node failure response shows concentrated exclusions (top 3 of 63 nodes account for >50% of all exclusions) and an auto-retry chain success rate of 33.3% over 12 chains (73 attempts), 2.7x the 12.5% manual recovery rate; the median retry interval is 11 min (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

Recent advances have demonstrated the promising capabilities of large language models (LLMs) in generating register-transfer level (RTL) code, such as Verilog. However, existing LLM-based frameworks still face significant challenges in accurately handling the complexity of real-world RTL designs, particularly those that are large-scale and involve multi-level module instantiations. To address this issue, we present ComplexVCoder, an open-source LLM-driven framework that enhances both the generation quality and efficiency of complex Verilog code. Specifically, we introduce a two-stage generation mechanism, which leverages an intermediate representation to enable a more accurate and structured transition from natural language descriptions to intricate Verilog designs. In addition, we introduce a rule-based alignment method and a domain-specific retrieval-augmented generation (RAG) to further improve the correctness of the synthesized code by incorporating relevant design knowledge during generation. To evaluate our approach, we construct a comprehensive dataset comprising 55 complex Verilog designs derived from real-world implementations. We also release an open-source benchmark suite for systematically assessing the quality of auto-generated RTL code together with the ComplexVCoder framework. Experimental results show that ComplexVCoder outperforms SOTA frameworks such as CodeV and RTLCoder by 14.6% and 22.2%, respectively, in terms of function correctness on complex Verilog benchmarks. Furthermore, ComplexVcoder achieves comparable generation performances in terms of functionality correctness using a lightweight 32B model (Qwen2.5), rivaling larger-scale models such as GPT-3.5 and DeepSeek-V3.

Machine learning, particularly in the form of deep learning, has driven most of the recent fundamental developments in artificial intelligence. Deep learning is based on computational models that are, to a certain extent, bio-inspired, as they rely on networks of connected simple computing units operating in parallel. Deep learning has been successfully applied in areas such as object/pattern recognition, speech and natural language processing, self-driving vehicles, intelligent self-diagnostics tools, autonomous robots, knowledgeable personal assistants, and monitoring. These successes have been mostly supported by three factors: availability of vast amounts of data, continuous growth in computing power, and algorithmic innovations. The approaching demise of Moore's law, and the consequent expected modest improvements in computing power that can be achieved by scaling, raise the question of whether the described progress will be slowed or halted due to hardware limitations. This paper reviews the case for a novel beyond CMOS hardware technology, memristors, as a potential solution for the implementation of power-efficient in-memory computing, deep learning accelerators, and spiking neural networks. Central themes are the reliance on non-von-Neumann computing architectures and the need for developing tailored learning and inference algorithms. To argue that lessons from biology can be useful in providing directions for further progress in artificial intelligence, we briefly discuss an example based reservoir computing. We conclude the review by speculating on the big picture view of future neuromorphic and brain-inspired computing systems.

Numeric format proliferation in machine learning hardware -- FP8 (E4M3 and E5M2), BF16, MXFP4, microscaling block formats, and dozens of research variants -- has outpaced the availability of vendor-neutral, bit-exact reference material. Engineers porting models across accelerators encounter silent divergences that are difficult to diagnose without a shared ruler. This paper describes a catalog of 84 numeric formats spanning 13 families, a suite of six bit-exact conformance packs covering GF16, MXFP4 element, BF16, FP8 E4M3, FP8 E5M2, and E8M0 block scale, and an IEEE P3109 v3.2.0 cross-walk that maps each pack to its corresponding standards-track configured format. Each pack is a self-contained JSON document with a SHA-256 fingerprint, a shared row schema, and an anchor vector that encodes 3.0 -- the identity phi^2 + 1/phi^2 = 3 -- as a cross-pack sanity check. Packs are cross-validated against ml_dtypes 0.5.4 (Google/JAX); any divergence is documented explicitly and interpreted as a spec-permitted interpretation gap rather than hidden. The work is framed as registry filling: it does not propose new formats, make model-accuracy claims, or assert superiority over any vendor's implementation. All artifacts are publicly available at https://github.com/gHashTag/t27 under an open license.

Exponential increases in scientific experimental data are outstripping the rate of progress in silicon technology. As a result, heterogeneous combinations of architectures and process or device technologies are increasingly important to meet the computing demands of future scientific experiments. However, the complexity of heterogeneous computing systems requires systematic modeling to understand performance. We present a model which addresses this need by framing key aspects of data collection pipelines and constraints, and combines them with the important vectors of technology that shape alternatives, computing metrics that allow complex alternatives to be compared. For instance, a data collection pipeline may be characterized by parameters such as sensor sampling rates, amount of data collected, and the overall relevancy of retrieved samples. Alternatives to this pipeline are enabled by hardware development vectors including advancing CMOS, GPUs, neuromorphic computing, and edge computing. By calculating metrics for each alternative such as overall F1 score, power, hardware cost, and energy expended per relevant sample, this model allows alternate data collection systems to be rigorously compared. To demonstrate this model's capability, we apply it to the CMS experiment (and planned HL-LHC upgrade) to evaluate and compare the application of novel technologies in the data acquisition system (DAQ). We demonstrate that improvements to early stages in the DAQ are highly beneficial, greatly reducing the resources required at later stages of processing (such as a 60% power reduction) and increasing the amount of relevant data retrieved from the experiment per unit power (improving from 0.065 to 0.31 samples/kJ) However, we predict further advances will be required in order to meet overall power and cost constraints for the DAQ.

A modern challenge of Artificial Intelligence is learning multiple patterns at once (i.e.parallel learning). While this can not be accomplished by standard Hebbian associative neural networks, in this paper we show how the Multitasking Hebbian Network (a variation on theme of the Hopfield model working on sparse data-sets) is naturally able to perform this complex task. We focus on systems processing in parallel a finite (up to logarithmic growth in the size of the network) amount of patterns, mirroring the low-storage level of standard associative neural networks at work with pattern recognition. For mild dilution in the patterns, the network handles them hierarchically, distributing the amplitudes of their signals as power-laws w.r.t. their information content (hierarchical regime), while, for strong dilution, all the signals pertaining to all the patterns are raised with the same strength (parallel regime). Further, confined to the low-storage setting (i.e., far from the spin glass limit), the presence of a teacher neither alters the multitasking performances nor changes the thresholds for learning: the latter are the same whatever the training protocol is supervised or unsupervised. Results obtained through statistical mechanics, signal-to-noise technique and Monte Carlo simulations are overall in perfect agreement and carry interesting insights on multiple learning at once: for instance, whenever the cost-function of the model is minimized in parallel on several patterns (in its description via Statistical Mechanics), the same happens to the standard sum-squared error Loss function (typically used in Machine Learning).

The increasing complexity and high costs associated with modern processor design have led to a surge in demand for processor design automation. Instruction-tuned large language models (LLMs) have demonstrated remarkable performance in automatically generating code for general-purpose programming languages like Python. However, these methods fail on hardware description languages (HDLs) like Verilog due to the scarcity of high-quality instruction tuning data, as even advanced LLMs like GPT-3.5 exhibit limited performance on Verilog generation. Regarding this issue, we observe that (1) Verilog code collected from the real world has higher quality than those generated by LLMs. (2) LLMs like GPT-3.5 excel in summarizing Verilog code rather than generating it. Based on these observations, this paper introduces CodeV, a series of open-source instruction-tuned Verilog generation LLMs. Instead of generating descriptions first and then getting the corresponding code from advanced LLMs, we prompt the LLM with Verilog code and let the LLM generate the corresponding natural language description by multi-level summarization. Experimental results show that CodeV relatively surpasses the previous open-source SOTA by 14.4% (BetterV in VerilogEval) and 11.3% (RTLCoder in RTLLM) respectively, and also relatively outperforms previous commercial SOTA GPT-4 by 22.1% in VerilogEval.

The use of Large Language Models (LLMs) in hardware design has taken off in recent years, principally through its incorporation in tools that increase chip designer productivity. There has been considerable discussion about the use of LLMs in RTL specifications of chip designs, for which the two most popular languages are Verilog and VHDL. LLMs and their use in Verilog design has received significant attention due to the higher popularity of the language, but little attention so far has been given to VHDL despite its continued popularity in the industry. There has also been little discussion about the unique needs of organizations that engage in high-performance processor design, and techniques to deploy AI solutions in these settings. In this paper, we describe our journey in developing a Large Language Model (LLM) specifically for the purpose of explaining VHDL code, a task that has particular importance in an organization with decades of experience and assets in high-performance processor design. We show how we developed test sets specific to our needs and used them for evaluating models as we performed extended pretraining (EPT) of a base LLM. Expert evaluation of the code explanations produced by the EPT model increased to 69% compared to a base model rating of 43%. We further show how we developed an LLM-as-a-judge to gauge models similar to expert evaluators. This led us to deriving and evaluating a host of new models, including an instruction-tuned version of the EPT model with an expected expert evaluator rating of 71%. Our experiments also indicate that with the potential use of newer base models, this rating can be pushed to 85% and beyond. We conclude with a discussion on further improving the quality of hardware design LLMs using exciting new developments in the Generative AI world.

In modern Very Large Scale Integrated (VLSI) circuit design flow, the Register-Transfer Level (RTL) stage presents a critical opportunity for timing optimization. Addressing timing violations at this early stage is essential, as modern systems demand higher speeds, where even minor timing violations can lead to functional failures or system crashes. However, traditional timing optimization heavily relies on manual expertise, requiring engineers to iteratively analyze timing reports and debug. To automate this process, this paper proposes ViTAD, a method that efficiently analyzes the root causes of timing violations and dynamically generates targeted repair strategies. Specifically, we first parse Verilog code and timing reports to construct a Signal Timing Dependency Graph (STDG). Based on the STDG, we perform violation path analysis and use large language models (LLMs) to infer the root causes of violations. Finally, by analyzing the causes of violations, we selectively retrieve relevant debugging knowledge from a domain-specific knowledge base to generate customized repair solutions. To evaluate the effectiveness of our method, we construct a timing violation dataset based on real-world open-source projects. This dataset contains 54 cases of violations. Experimental results show that our method achieves a 73.68% success rate in repairing timing violations, while the baseline using only LLM is 54.38%. Our method improves the success rate by 19.30%.

Cross-device Federated Learning (FL) is a distributed learning paradigm with several challenges that differentiate it from traditional distributed learning, variability in the system characteristics on each device, and millions of clients coordinating with a central server being primary ones. Most FL systems described in the literature are synchronous - they perform a synchronized aggregation of model updates from individual clients. Scaling synchronous FL is challenging since increasing the number of clients training in parallel leads to diminishing returns in training speed, analogous to large-batch training. Moreover, stragglers hinder synchronous FL training. In this work, we outline a production asynchronous FL system design. Our work tackles the aforementioned issues, sketches of some of the system design challenges and their solutions, and touches upon principles that emerged from building a production FL system for millions of clients. Empirically, we demonstrate that asynchronous FL converges faster than synchronous FL when training across nearly one hundred million devices. In particular, in high concurrency settings, asynchronous FL is 5x faster and has nearly 8x less communication overhead than synchronous FL.

Learning and decision making in the brain are key processes critical to survival, and yet are processes implemented by non-ideal biological building blocks which can impose significant error. We explore quantitatively how the brain might cope with this inherent source of error by taking advantage of two ubiquitous mechanisms, redundancy and synchronization. In particular we consider a neural process whose goal is to learn a decision function by implementing a nonlinear gradient dynamics. The dynamics, however, are assumed to be corrupted by perturbations modeling the error which might be incurred due to limitations of the biology, intrinsic neuronal noise, and imperfect measurements. We show that error, and the associated uncertainty surrounding a learned solution, can be controlled in large part by trading off synchronization strength among multiple redundant neural systems against the noise amplitude. The impact of the coupling between such redundant systems is quantified by the spectrum of the network Laplacian, and we discuss the role of network topology in synchronization and in reducing the effect of noise. A range of situations in which the mechanisms we model arise in brain science are discussed, and we draw attention to experimental evidence suggesting that cortical circuits capable of implementing the computations of interest here can be found on several scales. Finally, simulations comparing theoretical bounds to the relevant empirical quantities show that the theoretical estimates we derive can be tight.

We propose 4Real-Video, a novel framework for generating 4D videos, organized as a grid of video frames with both time and viewpoint axes. In this grid, each row contains frames sharing the same timestep, while each column contains frames from the same viewpoint. We propose a novel two-stream architecture. One stream performs viewpoint updates on columns, and the other stream performs temporal updates on rows. After each diffusion transformer layer, a synchronization layer exchanges information between the two token streams. We propose two implementations of the synchronization layer, using either hard or soft synchronization. This feedforward architecture improves upon previous work in three ways: higher inference speed, enhanced visual quality (measured by FVD, CLIP, and VideoScore), and improved temporal and viewpoint consistency (measured by VideoScore and Dust3R-Confidence).

We present PyCARL, a PyNN-based common Python programming interface for hardware-software co-simulation of spiking neural network (SNN). Through PyCARL, we make the following two key contributions. First, we provide an interface of PyNN to CARLsim, a computationally-efficient, GPU-accelerated and biophysically-detailed SNN simulator. PyCARL facilitates joint development of machine learning models and code sharing between CARLsim and PyNN users, promoting an integrated and larger neuromorphic community. Second, we integrate cycle-accurate models of state-of-the-art neuromorphic hardware such as TrueNorth, Loihi, and DynapSE in PyCARL, to accurately model hardware latencies that delay spikes between communicating neurons and degrade performance. PyCARL allows users to analyze and optimize the performance difference between software-only simulation and hardware-software co-simulation of their machine learning models. We show that system designers can also use PyCARL to perform design-space exploration early in the product development stage, facilitating faster time-to-deployment of neuromorphic products. We evaluate the memory usage and simulation time of PyCARL using functionality tests, synthetic SNNs, and realistic applications. Our results demonstrate that for large SNNs, PyCARL does not lead to any significant overhead compared to CARLsim. We also use PyCARL to analyze these SNNs for a state-of-the-art neuromorphic hardware and demonstrate a significant performance deviation from software-only simulations. PyCARL allows to evaluate and minimize such differences early during model development.

In real-world Tool-Integrated Reasoning (TIR) scenarios, where LLMs interleave reasoning with external tool calls, a major source of inefficiency is that the toolcalls create pauses between LLM requests and cause KV-Cache eviction, forcing recomputation. Also, the long, unfiltered response returned by external tools inflates the KV-Cache, so each decode step spends more time loading the growing cache and thus becomes steadily slower as context length increases. However, existing efficiency metrics like token counts and toolcall counts fail to capture the real model inference latency. To address this, we introduce PTE (Prefill Token Equivalents), a hardware-aware TIR-efficiency metric that unifies internal reasoning and external tool-use costs while explicitly accounting for non-reusable KV-Cache and long-tool-response scenarios. Validation in a high-concurrency industrial setting indicates that PTE aligns significantly better with wall-clock latency than standard token counts, while maintaining consistent efficiency rankings across diverse hardware profiles. We conduct extensive experiments across five TIR benchmarks, quantify their PTE costs, and identify four inefficiency patterns that appear in TIR. We also discover that trajectories with higher PTE costs tend to have lower reasoning correctness, indicating that simply using more tools does not improve the quality of the answer.

Large language models (LLMs) have transformed code generation, yet their application in hardware design produces gate counts 38\%--1075\% higher than human designs. We present CircuitMind, a multi-agent framework that achieves human-competitive efficiency through three key innovations: syntax locking (constraining generation to basic logic gates), retrieval-augmented generation (enabling knowledge-driven design), and dual-reward optimization (balancing correctness with efficiency). To evaluate our approach, we introduce TC-Bench, the first gate-level benchmark harnessing collective intelligence from the TuringComplete ecosystem -- a competitive circuit design platform with hundreds of thousands of players. Experiments show CircuitMind enables 55.6\% of model implementations to match or exceed top-tier human experts in composite efficiency metrics. Most remarkably, our framework elevates the 14B Phi-4 model to outperform both GPT-4o mini and Gemini 2.0 Flash, achieving efficiency comparable to the top 25\% of human experts without requiring specialized training. These innovations establish a new paradigm for hardware optimization where collaborative AI systems leverage collective human expertise to achieve optimal circuit designs. Our model, data, and code are open-source at https://github.com/BUAA-CLab/CircuitMind.

Oscillations and synchronization are widely believed to play a fundamental role in representation and computation. However, existing machine learning approaches based on synchronization dynamics have largely been confined to specialized settings such as object discovery, with limited evidence of scalability to standard vision benchmarks or logic reasoning tasks. We propose the Winfree Oscillatory Neural Network (WONN), a dynamical neural architecture based on generalized Winfree dynamics. WONN evolves representations on the torus (S^1)^d through structured oscillatory interactions, combining phase-based inductive biases with flexible and hierarchical interaction mechanisms instantiated as either fixed trigonometric mappings or learnable neural networks. We evaluate WONN on image recognition and complex reasoning tasks, including CIFAR, ImageNet, Maze-hard, and Sudoku. Across these domains, WONN achieves competitive or superior performance with strong parameter efficiency. In particular, WONN is, to our knowledge, the first synchronization-based oscillatory architecture to scale competitively to ImageNet-1K. Furthermore, on Maze-hard, WONN achieves 80.1% accuracy using only 1% of the parameters of prior state-of-the-art models. These results suggest that structured oscillatory dynamics provide a scalable and parameter-efficient alternative to conventional neural architectures.

Limitations in Large Language Model (LLM) capabilities for hardware design tasks, such as generating functional Verilog codes, have motivated various fine-tuning optimizations utilizing curated hardware datasets from open-source repositories. However, these datasets remain limited in size and contain minimal checks on licensing for reuse, resulting in potential copyright violations by fine-tuned LLMs. Therefore, we propose an evaluation benchmark to estimate the risk of Verilog-trained LLMs to generate copyright-protected codes. To minimize this risk, we present an open-source Verilog dataset, FreeSet, containing over 220k files, along with the automated dataset curation framework utilized to provide additional guarantees of fair-use Verilog data. We then execute an LLM fine-tuning framework consisting of continual pre-training, resulting in a fine-tuned Llama model for Verilog, FreeV. Our results indicate that FreeV demonstrates the smallest risk of copyright-infringement among prior works, with only a 3% violation rate. Furthermore, experimental results demonstrate improvements in Verilog generation functionality over its baseline model, improving VerilogEval pass@10 rates by over 10%.

A delayed feedback reservoir (DFR) is a type of reservoir computing system well-suited for hardware implementations owing to its simple structure. Most existing DFR implementations use analog circuits that require both digital-to-analog and analog-to-digital converters for interfacing. However, digital DFRs emulate analog nonlinear components in the digital domain, resulting in a lack of design flexibility and higher power consumption. In this paper, we propose a novel modular DFR model that is suitable for fully digital implementations. The proposed model reduces the number of hyperparameters and allows flexibility in the selection of the nonlinear function, which improves the accuracy while reducing the power consumption. We further present two DFR realizations with different nonlinear functions, achieving 10x power reduction and 5.3x throughput improvement while maintaining equal or better accuracy.

The growing demand for efficient long-sequence modeling on edge devices has propelled widespread adoption of State Space Models (SSMs) like Mamba, due to their superior computational efficiency and scalability. As its autoregressive generation process remains memory-bound, speculative decoding has been proposed that incorporates draft model generation and target model verification. However, directly applying speculative decoding to SSMs faces three key challenges: (1) hidden state backtracking difficulties, (2) tree-based parallel verification incompatibility, and (3) hardware workload mismatch. To address these challenges, we propose SpecMamba, the first FPGA-based accelerator for Mamba with speculative decoding, which features system, algorithm, and hardware co-design. At the system level, we present a memory-aware hybrid backtracking strategy to coordinate both models. At the algorithm level, we propose first-in-first-out (FIFO)-based tree verification with tiling to minimize memory access. At the hardware level, we customize a dataflow that computes linear layers in parallel and SSM layers in series to enable maximal overlapping. Implemented on AMD FPGA platforms (VHK158 and VCK190), SpecMamba achieves a 2.27x speedup over GPU baselines and a 2.85x improvement compared to prior FPGA solutions, while demonstrating 5.41x and 1.26x higher energy efficiency, respectively.

Parkinsons disease (PD) alters cortical neural dynamics, yet reliable non-invasive electrophysiological biomarkers remain elusive. This study examined whether interpretable EEG features capturing complementary aspects of neural dynamics can discriminate Parkinsonian neural states. A comprehensive set of interpretable features was extracted and grouped into Standard descriptors (spectral power, phase synchronization, time-domain statistics) and Dynamical descriptors (aperiodic activity, cross-frequency coupling, scale-free dynamics, neuronal avalanche statistics, and instantaneous frequency measures). A multi-head attention transformer classifier was trained using strict LOSO validation. Group-level comparisons were performed to identify electrophysiological differences associated with disease and medication state. Standard feature sets achieved strongest performance in discriminating medication states (PDoff vs PDon), whereas Dynamical performed competitively in contrasts between PD patients and healthy controls. Random feature ablation analyses indicated that Dynamical descriptors provide complementary information distributed across features while correlation analysis revealed low redundancy within both feature sets. Group-level comparisons revealed medication-sensitive reductions in delta power and voltage variance, modulation of neuronal avalanche statistics, persistent increases in theta phase synchronization in PD patients, and disease-related alterations in cross-frequency interactions. Traditional spectral and synchronization features primarily reflect medication-related neural modulation, whereas dynamical descriptors reveal broader alterations in cortical network organization associated with disease but also with medication. These findings support multivariate EEG representations as a promising framework for developing non-invasive biomarkers of PD.

Electromagnetic (EM) side-channel analysis traditionally assumes a stationary, close-proximity probe - a threat model that underestimates aerial adversaries. TriSweep is a simulation framework that designs and evaluates a four-drone swarm architecture for autonomous standoff EM-SCA of embedded microcontrollers at 0.25-1.5 m. Three spatially specialized collector drones - Anchor (full-spectrum), Mask Probe (mask-register loading leakage), and Cipher Probe (masked SubBytes output leakage) - feed a stationary Accumulator drone that performs coherent combining (+4.8 dB SNR gain) and second-order mask cancellation via a centered product of the two spatially separated leakage streams. Evaluated against three real ANSSI ASCAD datasets (ATmega8515 masked AES-128 and 50/100-sample desynchronized variants), the framework achieves a simulated key rank of 18 +/- 1.7 (five-seed) at 0.25 m on the primary masked dataset. Profiling-trace cross-correlation alignment reduces single-drone rank from 89 to 21 on the 100-sample-jitter variant, demonstrating compensation for drone hover vibration. A two-channel CNN in the Accumulator converges to a loss of 0.454 (vs. random baseline 5.545) and improves rank on desynchronized datasets. No physical hardware has been fabricated; prototype construction is the planned next step.

The emergence of Software-Defined Vehicles represents a fundamental shift in automotive design, prioritizing software-centric architectures over traditional hardware-driven models. SDVs require modularity, interoperability, real-time processing, and over-the-air update capabilities throughout the vehicle lifecycle. However, current vehicle systems, characterized by tightly coupled software and hardware, struggle to meet these demands due to their complexity and heterogeneity. A critical first step toward enabling SDVs is the decoupling of software from hardware, which can be facilitated through a robust Hardware Abstraction Layer. While existing HALs offer hardware independence and standardized interfaces, their applicability and effectiveness in SDV contexts remain uncertain. This paper systematically evaluates current automotive HALs and explores HAL mechanisms from non-automotive domains, including smartphones, networking, and industrial automation, to extract cross-domain insights relevant to SDV development. A criteria-driven evaluation framework is developed to assess HALs against SDV-specific needs. Findings reveal that while middleware-based HALs offer portability and modularity, hypervisor-based approaches better support safety, OTA readiness, and hardware efficiency. Limitations in both approaches are identified, prompting recommendations for a hybrid HAL design that integrates hypervisor isolation with middleware standardization. This paper contributes to the ongoing developments in automotive software architecture by offering insights into the applicability and effectiveness of current HAL strategies. It provides actionable guidance for designing flexible, scalable, and future-ready HALs to support SDVs across their lifecycle.

QDNA-ID is a trust-chain framework that links physical quantum behavior to digitally verified records. The system first executes standard quantum circuits with random shot patterns across different devices to generate entropy profiles and measurement data that reveal device-specific behavior. A Bell or CHSH test is then used to confirm that correlations originate from genuine non classical processes rather than classical simulation. The verified outcomes are converted into statistical fingerprints using entropy, divergence, and bias features to characterize each device. These features and metadata for device, session, and random seed parameters are digitally signed and time stamped to ensure integrity and traceability. Authenticated artifacts are stored in a hierarchical index for reproducible retrieval and long term auditing. A visualization and analytics interface monitors drift, policy enforcement, and device behavior logs. A machine learning engine tracks entropy drift, detects anomalies, and classifies devices based on evolving patterns. An external verification API supports independent recomputation of hashes, signatures, and CHSH evidence. QDNA-ID operates as a continuous feedback loop that maintains a persistent chain of trust for quantum computing environments.

Deploying LLMs efficiently requires testing hundreds of serving configurations, but evaluating each one on a GPU cluster takes hours and costs thousands of dollars. Discrete-event simulators are faster and cheaper, but they require re-implementing the serving system's control logic -- a burden that compounds as frameworks evolve. We present Revati, a time-warp emulator that enables performance modeling by directly executing real serving system code at simulation-like speed. The system intercepts CUDA API calls to virtualize device management, allowing serving frameworks to run without physical GPUs. Instead of executing GPU kernels, it performs time jumps -- fast-forwarding virtual time by predicted kernel durations. We propose a coordination protocol that synchronizes these jumps across distributed processes while preserving causality. On vLLM and SGLang, Revati achieves less than 5% prediction error across multiple models and parallelism configurations, while running 5-17x faster than real GPU execution.

As hardware design complexity escalates, there is an urgent need for advanced automation in electronic design automation (EDA). Traditional register transfer level (RTL) design methods are manual, time-consuming, and prone to errors. While commercial (instruction-tuned) large language models (LLMs) shows promising performance for automation, they pose security and privacy concerns. Open-source models offer alternatives; however, they frequently fall short in quality/correctness, largely due to limited, high-quality RTL code data essential for effective training and generalization. This paper proposes RTL++, a first-of-its-kind LLM-assisted method for RTL code generation that utilizes graph representations of code structures to enhance the quality of generated code. By encoding RTL code into a textualized control flowgraphs (CFG) and data flow graphs (DFG), RTL++ captures the inherent hierarchy, dependencies, and relationships within the code. This structured graph-based approach enhances the context available to LLMs, enabling them to better understand and generate instructions. By focusing on data generation through graph representations, RTL++ addresses the limitations of previous approaches that rely solely on code and suffer from lack of diversity. Experimental results demonstrate that RTL++ outperforms state-of-the-art models fine-tuned for RTL generation, as evaluated using the VerilogEval benchmark's Pass@1/5/10 metric, as well as the RTLLM1.1 model, which highlight the effectiveness of graph-enhanced context in advancing the capabilities of LLM-assisted RTL code generation.

We introduce stale synchronous parallel as a mode of execution in parallel sparse triangular linear system solve and present a general directed-acyclic-graph scheduler capable of producing such schedules. Stale-synchronous-parallel schedules allow the overlap of synchronisation and compute which results in a geometric-mean speed-up of 7-30% of our scheduler, ElasticDivide, over state-of-the-art synchronous scheduler GrowLocal on an ARM machine using 48 cores. On an x86 machine using 48 cores, we report geometric-mean speed-ups of 19-60% over SpMP.

We study the dynamics of Stochastic Gradient Descent (SGD), which is known to steer deep neural networks toward invariant sets that correspond to simpler subnetworks. How this steering unfolds over time remains poorly understood. We answer this by modeling the stochastic gradient flow (SGF) as a percolation process, in which architectural symmetries force subnetworks to merge in discrete simultaneous blocks rather than one at a time. These structural transitions register as variance spikes in a macroscopic order parameter, echoing physical phase transitions. We further show this trapping mechanism and its associated scaling cascade extend to Adam and AdamW under an explicit heavy-tailed noise model.

Modern large-scale LLM pretraining benefits from utilizing Pipeline Parallelism; however, synchronous implementations leave GPUs idle during pipeline bubbles, wasting computational resources. Asynchronous Pipeline Parallelism eliminates these bubbles, maximizing throughput at the cost of gradient staleness. Among asynchronous schedules, PipeDream-2BW is particularly appealing: unlike the original PipeDream schedule, it ensures a constant one-step gradient delay regardless of pipeline depth. However, its adoption remains limited due to the common belief that optimizing under staleness is fundamentally unstable. In this work, we challenge this assumption, demonstrating that degradation under one-step delay depends strongly on optimizer choice rather than being an intrinsic limitation. We provide the first comprehensive empirical analysis showing that while AdamW, the predominant optimizer at the time when PipeDream-2BW was introduced, indeed suffers from severe degradation, recent methods like Muon exhibit strong robustness under a one-step delay. We introduce an optimizer-agnostic Error Feedback-inspired correction to further mitigate delay effects. We provide supporting theoretical analysis demonstrating convergence for Muon with and without this correction. Extensive evaluation on models up to 10B parameters confirms that our strategies bridge the performance gap with synchronous training, highlighting the practical potential of asynchronous pipeline parallelism at scale.

Mechanistic interpretability work attempts to reverse engineer the learned algorithms present inside neural networks. One focus of this work has been to discover 'circuits' -- subgraphs of the full model that explain behaviour on specific tasks. But how do we measure the performance of such circuits? Prior work has attempted to measure circuit 'faithfulness' -- the degree to which the circuit replicates the performance of the full model. In this work, we survey many considerations for designing experiments that measure circuit faithfulness by ablating portions of the model's computation. Concerningly, we find existing methods are highly sensitive to seemingly insignificant changes in the ablation methodology. We conclude that existing circuit faithfulness scores reflect both the methodological choices of researchers as well as the actual components of the circuit - the task a circuit is required to perform depends on the ablation used to test it. The ultimate goal of mechanistic interpretability work is to understand neural networks, so we emphasize the need for more clarity in the precise claims being made about circuits. We open source a library at https://github.com/UFO-101/auto-circuit that includes highly efficient implementations of a wide range of ablation methodologies and circuit discovery algorithms.

This paper introduces VeriThoughts, a novel dataset designed for reasoning-based Verilog code generation. We establish a new benchmark framework grounded in formal verification methods to evaluate the quality and correctness of generated hardware descriptions. Additionally, we present a suite of specialized small-scale models optimized specifically for Verilog generation. Our work addresses the growing need for automated hardware design tools that can produce verifiably correct implementations from high-level specifications, potentially accelerating the hardware development process while maintaining rigorous correctness guarantees. Our code and data are available at https://github.com/wilyub/VeriThoughts{this URL}.

Printed Circuit Board (PCB) schematic design plays an essential role in all areas of electronic industries. Unlike prior works that focus on digital or analog circuits alone, PCB design must handle heterogeneous digital, analog, and power signals while adhering to real-world IC packages and pin constraints. Automated PCB schematic design remains unexplored due to the scarcity of open-source data and the absence of simulation-based verification. We introduce PCBSchemaGen, the first training-free framework for PCB schematic design that comprises LLM agent and Constraint-guided synthesis. Our approach makes three contributions: 1. an LLM-based code generation paradigm with iterative feedback with domain-specific prompts. 2. a verification framework leveraging a real-world IC datasheet derived Knowledge Graph (KG) and Subgraph Isomorphism encoding pin-role semantics and topological constraints. 3. an extensive experiment on 23 PCB schematic tasks spanning digital, analog, and power domains. Results demonstrate that PCBSchemaGen significantly improves design accuracy and computational efficiency.

A frontier AI model is trained in an AI data center, on tens of thousands of accelerators joined by a dedicated network, and every training step ends with all of them exchanging data at once. Between racks, that network is optical, and each of its four layers, from lasers to switches, runs a fixed or after-the-fact policy. Lasers sharing an enclosure, cooling, and power can fail together. At a fixed spare ratio, correlated failure provably caps a pool's availability however large it grows. In this paper, we present a comprehensive predictive control plane framework, called Halley, that reads each resource's next state and acts before the failure occurs. It has four components, each carrying a formal guarantee: LightReserve that sizes the laser pool to provide a coverage bound, FoldFit that schedules the switch within 11/9 of the optimal, ThermaLead that holds a microring with one-step-ahead control, and TriageGuard that protects the highest-risk modules first. Halley gives each layer a predictive controller that defers to the deployed policy when unsure. Composed from simulations at that point, effective goodput, the share of ideal throughput kept, rises from 65.2\% to 76.5\% if a window that exhausts its spares is lost. If only the dark channels' bandwidth is lost, it reaches 67.4\%. Per megawatt, that is up to 1.03--1.17 times the training; for the same training, up to 3.3--14.7\% less data center capacity. Halley's fallback circuits are formally verified and are shown to achieve close timing on a commercial FPGA, and pass a 130~nm signoff.

The increasing popularity of large language models (LLMs) has paved the way for their application in diverse domains. This paper proposes a benchmarking framework tailored specifically for evaluating LLM performance in the context of Verilog code generation for hardware design and verification. We present a comprehensive evaluation dataset consisting of 156 problems from the Verilog instructional website HDLBits. The evaluation set consists of a diverse set of Verilog code generation tasks, ranging from simple combinational circuits to complex finite state machines. The Verilog code completions can be automatically tested for functional correctness by comparing the transient simulation outputs of the generated design with a golden solution. We also demonstrate that the Verilog code generation capability of pretrained language models could be improved with supervised fine-tuning by bootstrapping with LLM generated synthetic problem-code pairs.

Vector search has emerged as the foundation for large-scale information retrieval and machine learning systems, with search engines like Google and Bing processing tens of thousands of queries per second on petabyte-scale document datasets by evaluating vector similarities between encoded query texts and web documents. As performance demands for vector search systems surge, accelerated hardware offers a promising solution in the post-Moore's Law era. We introduce FANNS, an end-to-end and scalable vector search framework on FPGAs. Given a user-provided recall requirement on a dataset and a hardware resource budget, FANNS automatically co-designs hardware and algorithm, subsequently generating the corresponding accelerator. The framework also supports scale-out by incorporating a hardware TCP/IP stack in the accelerator. FANNS attains up to 23.0times and 37.2times speedup compared to FPGA and CPU baselines, respectively, and demonstrates superior scalability to GPUs, achieving 5.5times and 7.6times speedup in median and 95th percentile (P95) latency within an eight-accelerator configuration. The remarkable performance of FANNS lays a robust groundwork for future FPGA integration in data centers and AI supercomputers.

Large language models (LLMs) have shown strong performance in Verilog generation from natural language description. However, ensuring the functional correctness of the generated code remains a significant challenge. This paper introduces a method that integrates verification insights from testbench into the training of Verilog generation LLMs, aligning the training with the fundamental goal of hardware design: functional correctness. The main obstacle in using LLMs for Verilog code generation is the lack of sufficient functional verification data, particularly testbenches paired with design specifications and code. To address this problem, we introduce an automatic testbench generation pipeline that decomposes the process and uses feedback from the Verilog compiler simulator (VCS) to reduce hallucination and ensure correctness. We then use the testbench to evaluate the generated codes and collect them for further training, where verification insights are introduced. Our method applies reinforcement learning (RL), specifically direct preference optimization (DPO), to align Verilog code generation with functional correctness by training preference pairs based on testbench outcomes. In evaluations on VerilogEval-Machine, VerilogEval-Human, RTLLM v1.1, RTLLM v2, and VerilogEval v2, our approach consistently outperforms state-of-the-art baselines in generating functionally correct Verilog code. We open source all training code, data, and models at https://anonymous.4open.science/r/VeriPrefer-E88B.

In VLSI physical design, many algorithms require the solution of difficult combinatorial optimization problems such as max/min-cut, max-flow problems etc. Due to the vast number of elements typically found in this problem domain, these problems are computationally intractable leading to the use of approximate solutions. In this work, we explore the Ising spin glass model as a solution methodology for hard combinatorial optimization problems using the general purpose GPU (GPGPU). The Ising model is a mathematical model of ferromagnetism in statistical mechanics. Ising computing finds a minimum energy state for the Ising model which essentially corresponds to the expected optimal solution of the original problem. Many combinatorial optimization problems can be mapped into the Ising model. In our work, we focus on the max-cut problem as it is relevant to many VLSI physical design problems. Our method is inspired by the observation that Ising annealing process is very amenable to fine-grain massive parallel GPU computing. We will illustrate how the natural randomness of GPU thread scheduling can be exploited during the annealing process to create random update patterns and allow better GPU resource utilization. Furthermore, the proposed GPU-based Ising computing can handle any general Ising graph with arbitrary connections, which was shown to be difficult for existing FPGA and other hardware based implementation methods. Numerical results show that the proposed GPU Ising max-cut solver can deliver more than 2000X speedup over the CPU version of the algorithm on some large examples, which shows huge performance improvement for addressing many hard optimization algorithms for practical VLSI physical design.

We present a hardware-oriented description of GoldenFloat (GF), a static-split floating-point family generated by a single closed rule, and three concrete artefacts: (i) an open multi-width RTL generator covering GF4-GF256 with a continuous-integration differential sweep against a correctly-rounded reference; (ii) an integer-backed Lucas-exact accumulator path verified at 500-digit precision for n = 1, ..., 256; and (iii) a GF16 FPGA codec passing a 35-of-35 testbench at 323 MHz on Artix-7 (Xilinx XC7A35T). For each total width N >= 4, the exponent width is e = round((N-1)/phi^2) with fraction f = N-1-e and phi = (1+sqrt(5))/2. The rule reproduces the realised exponent widths of nine formats (9/9) and extends consistently to GF128, GF512, GF1024. The rule is positioned alongside posit, takum, OCP-MX, and the IEEE P3109 multi-width float draft. We make no per-rung accuracy or superiority claim against any of them. The breadth/toolchain-coherence framing is recorded as an open conjecture with a pre-registered falsification path. A falsification ledger (FL-002) records open questions and the experiments that would settle them. An RTL-correctness erratum dated 2026-05-31 is reported; the fabricated TTSKY26b dies carry the defective multiplier portfolio, and the corrected generator is the regeneration baseline.

Cross-silo federated learning offers a promising solution to collaboratively train robust and generalized AI models without compromising the privacy of local datasets, e.g., healthcare, financial, as well as scientific projects that lack a centralized data facility. Nonetheless, because of the disparity of computing resources among different clients (i.e., device heterogeneity), synchronous federated learning algorithms suffer from degraded efficiency when waiting for straggler clients. Similarly, asynchronous federated learning algorithms experience degradation in the convergence rate and final model accuracy on non-identically and independently distributed (non-IID) heterogeneous datasets due to stale local models and client drift. To address these limitations in cross-silo federated learning with heterogeneous clients and data, we propose FedCompass, an innovative semi-asynchronous federated learning algorithm with a computing power-aware scheduler on the server side, which adaptively assigns varying amounts of training tasks to different clients using the knowledge of the computing power of individual clients. FedCompass ensures that multiple locally trained models from clients are received almost simultaneously as a group for aggregation, effectively reducing the staleness of local models. At the same time, the overall training process remains asynchronous, eliminating prolonged waiting periods from straggler clients. Using diverse non-IID heterogeneous distributed datasets, we demonstrate that FedCompass achieves faster convergence and higher accuracy than other asynchronous algorithms while remaining more efficient than synchronous algorithms when performing federated learning on heterogeneous clients. The source code for FedCompass is available at https://github.com/APPFL/FedCompass.

Why do neurons communicate through spikes? By definition, spikes are all-or-none neural events which occur at continuous times. In other words, spikes are on one side binary, existing or not without further details, and on the other can occur at any asynchronous time, without the need for a centralized clock. This stands in stark contrast to the analog representation of values and the discretized timing classically used in digital processing and at the base of modern-day neural networks. As neural systems almost systematically use this so-called event-based representation in the living world, a better understanding of this phenomenon remains a fundamental challenge in neurobiology in order to better interpret the profusion of recorded data. With the growing need for intelligent embedded systems, it also emerges as a new computing paradigm to enable the efficient operation of a new class of sensors and event-based computers, called neuromorphic, which could enable significant gains in computation time and energy consumption -- a major societal issue in the era of the digital economy and global warming. In this review paper, we provide evidence from biology, theory and engineering that the precise timing of spikes plays a crucial role in our understanding of the efficiency of neural networks.

Insertion of hardware Trojans (HTs) in integrated circuits is a pernicious threat. Since HTs are activated under rare trigger conditions, detecting them using random logic simulations is infeasible. In this work, we design a reinforcement learning (RL) agent that circumvents the exponential search space and returns a minimal set of patterns that is most likely to detect HTs. Experimental results on a variety of benchmarks demonstrate the efficacy and scalability of our RL agent, which obtains a significant reduction (169times) in the number of test patterns required while maintaining or improving coverage (95.75%) compared to the state-of-the-art techniques.

Large language model (LLM) serving infrastructures are undergoing a shift toward heterogeneity and disaggregation. Modern deployments increasingly integrate diverse accelerators and near-memory processing technologies, introducing significant hardware heterogeneity, while system software increasingly separates computation, memory, and model components across distributed resources to improve scalability and efficiency. As a result, LLM serving performance is no longer determined by hardware or software choices in isolation, but by their runtime interaction through scheduling, data movement, and interconnect behavior. However, understanding these interactions remains challenging, as existing simulators lack the ability to jointly model heterogeneous hardware and disaggregated serving techniques within a unified, runtime-driven framework. This paper presents LLMServingSim 2.0, a unified system-level simulator designed to make runtime-driven hardware-software interactions in heterogeneous and disaggregated LLM serving infrastructures explicit and analyzable. LLMServingSim 2.0 embeds serving decisions and hardware behavior into a single runtime loop, enabling interaction-aware modeling of batching, routing, offloading, memory, and power. The simulator supports extensible integration of emerging accelerators and memory systems through profile-based modeling, while capturing dynamic serving behavior and system-level effects. We validate LLMServingSim 2.0 against real deployments, showing that it reproduces key performance, memory, and power metrics with an average error of 0.95%, while maintaining simulation times of around 10 minutes even for complex configurations. These results demonstrate that LLMServingSim 2.0 provides a practical bridge between hardware innovation and serving-system design, enabling systematic exploration and co-design for next-generation LLM serving infrastructures.

Automatic algorithm-hardware co-design for DNN has shown great success in improving the performance of DNNs on FPGAs. However, this process remains challenging due to the intractable search space of neural network architectures and hardware accelerator implementation. Differing from existing hardware-aware neural architecture search (NAS) algorithms that rely solely on the expensive learning-based approaches, our work incorporates integer programming into the search algorithm to prune the design space. Given a set of hardware resource constraints, our integer programming formulation directly outputs the optimal accelerator configuration for mapping a DNN subgraph that minimizes latency. We use an accuracy predictor for different DNN subgraphs with different quantization schemes and generate accuracy-latency pareto frontiers. With low computational cost, our algorithm can generate quantized networks that achieve state-of-the-art accuracy and hardware performance on Xilinx Zynq (ZU3EG) FPGA for image classification on ImageNet dataset. The solution searched by our algorithm achieves 72.5% top-1 accuracy on ImageNet at framerate 50, which is 60% faster than MnasNet and 135% faster than FBNet with comparable accuracy.

The convergence of Information Technology and Operational Technology has exposed Industrial Control Systems (ICS) to multi-stage cyberattacks that traverse software, network, and physical process layers simultaneously. Although Provenance-based Intrusion Detection Systems (PIDS) are effective in Information Technology (IT) environments, their applicability to Industrial Cyber-Physical Systems (CPS) remains largely unexplored because of the absence of datasets that jointly capture host-level causal behavior, industrial network semantics, and physical process state. To address this gap, we design an open-source, Hardware-in-the-Loop (HIL) CPS testbed that replicates an industrial chemical reactor control architecture across the Purdue model layers. Using this testbed, we propose ProvICS, a multimodal provenance dataset purpose-built for CPS intrusion detection, which synchronously captures four streams: whole-system provenance graphs from the supervisory host and the resource-constrained PLC, decoded Modbus deep-packet inspection records, and physical process telemetry. The collection comprises a 48-hour benign phase and a 22-hour attack phase across four campaigns covering 20 ICS ATT&CK techniques over 32 attack events, ranging from reconnaissance to physical process manipulation. Comparative analysis shows that ProvICS is among the few existing ICS/CPS benchmarks with multi-host kernel-level provenance, real PLC hardware-in-the-loop execution, decoded Modbus traffic, physical process-state measurements, and auxiliary raw PCAP traces in a time-synchronized collection. Baseline detection further confirms that cross-modal fusion can detect all 32 labeled attack events (F1 = 0.913, false-positive rate (FPR) = 1.40%), demonstrating the dataset's ability to expose complementary attack signals across modalities and addressing a gap not covered by prior benchmarks.

Optimizing Register Transfer Level (RTL) code is crucial for improving the power, performance, and area (PPA) of digital circuits in the early stages of synthesis. Manual rewriting, guided by synthesis feedback, can yield high-quality results but is time-consuming and error-prone. Most existing compiler-based approaches have difficulty handling complex design constraints. Large Language Model (LLM)-based methods have emerged as a promising alternative to address these challenges. However, LLM-based approaches often face difficulties in ensuring alignment between the generated code and the provided prompts. This paper presents SymRTLO, a novel neuron-symbolic RTL optimization framework that seamlessly integrates LLM-based code rewriting with symbolic reasoning techniques. Our method incorporates a retrieval-augmented generation (RAG) system of optimization rules and Abstract Syntax Tree (AST)-based templates, enabling LLM-based rewriting that maintains syntactic correctness while minimizing undesired circuit behaviors. A symbolic module is proposed for analyzing and optimizing finite state machine (FSM) logic, allowing fine-grained state merging and partial specification handling beyond the scope of pattern-based compilers. Furthermore, a fast verification pipeline, combining formal equivalence checks with test-driven validation, further reduces the complexity of verification. Experiments on the RTL-Rewriter benchmark with Synopsys Design Compiler and Yosys show that SymRTLO improves power, performance, and area (PPA) by up to 43.9%, 62.5%, and 51.1%, respectively, compared to the state-of-the-art methods.

The rapid advancement of large language models (LLMs) has enabled the ability to effectively analyze and generate code nearly instantaneously, resulting in their widespread adoption in software development. Following this advancement, researchers and companies have begun integrating LLMs across the hardware design and verification process. However, these highly potent LLMs can also induce new attack scenarios upon security vulnerabilities across the hardware development process. One such attack vector that has not been explored is intellectual property (IP) piracy. Given that this attack can manifest as rewriting hardware designs to evade piracy detection, it is essential to thoroughly evaluate LLM capabilities in performing this task and assess the mitigation abilities of current IP piracy detection tools. Therefore, in this work, we propose LLMPirate, the first LLM-based technique able to generate pirated variations of circuit designs that successfully evade detection across multiple state-of-the-art piracy detection tools. We devise three solutions to overcome challenges related to integration of LLMs for hardware circuit designs, scalability to large circuits, and effectiveness, resulting in an end-to-end automated, efficient, and practical formulation. We perform an extensive experimental evaluation of LLMPirate using eight LLMs of varying sizes and capabilities and assess their performance in pirating various circuit designs against four state-of-the-art, widely-used piracy detection tools. Our experiments demonstrate that LLMPirate is able to consistently evade detection on 100% of tested circuits across every detection tool. Additionally, we showcase the ramifications of LLMPirate using case studies on IBEX and MOR1KX processors and a GPS module, that we successfully pirate. We envision that our work motivates and fosters the development of better IP piracy detection tools.

Long-sequence memory tracking places two opposing demands on a recurrent state: near-lossless retention of stored bindings over long horizons, and active overwriting of stale ones. In our diagnostic suite, the strongest efficient baselines tend to solve only one side well. Continuous-time-parameterized state-space models (SSMs) such as Mamba obtain their discrete recurrence by zero-order-hold discretization of a continuous-time system; we argue that this detour is unnecessary for memory tracking and parameterize the discrete transition directly. Naju (Native Adaptive Junction Unit) factorizes the recurrent update, schematically x_n = f_nodot x_{n-1} + i_nodot(B_n u_n), into an explicit discrete pole (a learned forget gate f_n), an independent write gain i_n, and input-dependent write/read maps. Since the sigmoid pole satisfies 0<f_n<1, each frozen local coordinate is Schur-stable by construction, and the full time-varying recurrence satisfies a fading-memory/BIBO bound under uniform boundedness assumptions, with no stability regularizer. We formalize the key structural limitation of coupled designs: any non-expansive complementary single-gate recurrence ties the effective retention r and write gain w through |r|+wle 1, so near-complete retention forces weak writing; decoupling f_n from i_n removes this constraint. Empirically, Naju is the only evaluated model that remains strong on both retention and overwriting at 4x the training length. Beyond the diagnostic suite, we evaluate Naju on WikiText-103 language modeling, Long Range Arena, and multi-query associative recall. Across these settings, Naju consistently combines strong long-range memory with competitive or superior performance, outperforming the Mamba baselines in the principal comparisons while remaining competitive with the Transformer and preserving linear-time, linear-memory scaling.

As the complexities of processors keep increasing, the task of effectively verifying their integrity and security becomes ever more daunting. The intricate web of instructions, microarchitectural features, and interdependencies woven into modern processors pose a formidable challenge for even the most diligent verification and security engineers. To tackle this growing concern, recently, researchers have developed fuzzing techniques explicitly tailored for hardware processors. However, a prevailing issue with these hardware fuzzers is their heavy reliance on static strategies to make decisions in their algorithms. To address this problem, we develop a novel dynamic and adaptive decision-making framework, MABFuzz, that uses multi-armed bandit (MAB) algorithms to fuzz processors. MABFuzz is agnostic to, and hence, applicable to, any existing hardware fuzzer. In the process of designing MABFuzz, we encounter challenges related to the compatibility of MAB algorithms with fuzzers and maximizing their efficacy for fuzzing. We overcome these challenges by modifying the fuzzing process and tailoring MAB algorithms to accommodate special requirements for hardware fuzzing. We integrate three widely used MAB algorithms in a state-of-the-art hardware fuzzer and evaluate them on three popular RISC-V-based processors. Experimental results demonstrate the ability of MABFuzz to cover a broader spectrum of processors' intricate landscapes and doing so with remarkable efficiency. In particular, MABFuzz achieves up to 308x speedup in detecting vulnerabilities and up to 5x speedup in achieving coverage compared to a state-of-the-art technique.

Decoder-only Transformer models such as GPT have demonstrated superior performance in text generation, by autoregressively predicting the next token. However, the performance of GPT is bounded by low compute-to-memory-ratio and high memory access. Throughput-oriented architectures such as GPUs target parallel processing rather than sequential token generation, and are not efficient for GPT acceleration, particularly on-device inference applications. Process-in-memory (PIM) architectures can significantly reduce data movement and provide high computation parallelism, and are promising candidates to accelerate GPT inference. In this work, we propose PIM-GPT that aims to achieve high throughput, high energy efficiency and end-to-end acceleration of GPT inference. PIM-GPT leverages DRAM-based PIM solutions to perform multiply-accumulate (MAC) operations on the DRAM chips, greatly reducing data movement. A compact application-specific integrated chip (ASIC) is designed and synthesized to initiate instructions to PIM chips and support data communication along with necessary arithmetic computations. At the software level, the mapping scheme is designed to maximize data locality and computation parallelism by partitioning a matrix among DRAM channels and banks to utilize all in-bank computation resources concurrently. We develop an event-driven clock-cycle accurate simulator to validate the efficacy of the proposed PIM-GPT architecture. Overall, PIM-GPT achieves 41-137times, 631-1074times speedup and 339-1085times, 890-1632times energy efficiency over GPU and CPU baseline, respectively, on 8 GPT models with up to 1.4 billion parameters.

Large Language Models (LLMs) have proved effective and efficient in generating code, leading to their utilization within the hardware design process. Prior works evaluating LLMs' abilities for register transfer level code generation solely focus on functional correctness. However, the creativity associated with these LLMs, or the ability to generate novel and unique solutions, is a metric not as well understood, in part due to the challenge of quantifying this quality. To address this research gap, we present CreativeEval, a framework for evaluating the creativity of LLMs within the context of generating hardware designs. We quantify four creative sub-components, fluency, flexibility, originality, and elaboration, through various prompting and post-processing techniques. We then evaluate multiple popular LLMs (including GPT models, CodeLlama, and VeriGen) upon this creativity metric, with results indicating GPT-3.5 as the most creative model in generating hardware designs.

Industrial plants are prone to faults. To notify the operator of a fault occurrence, alarms are utilized as a basic part of modern computer-controlled plants. However, due to the interconnections of different parts of a plant, a single fault often propagates through the plant and triggers a (sometimes large) number of alarms. A graphical plant topology can help operators, process engineers and maintenance experts find the root cause of a plant upset or discover the propagation path of a fault. In this paper, a method is developed to extract plant topology form alarm data. The method is based on process mining, a collection of concepts and algorithms that model a process (not necessarily an engineering one) based on recorded events. The event based nature of alarm data as well as the chronological order of recorded alarms make them suitable for process mining. The methodology developed in this paper is based on preparing alarm data for process mining and then using the suitable process mining algorithms to extract plant topology. The extracted topology is represented by the familiar Petri net which can be used for root cause analysis and discovering fault propagation paths. The methods to evaluate the extracted topology are also discussed. A case study on the well-known Tennessee Eastman process demonstrates the utility of the proposed method.

Foundation models for time series analysis (TSA) have attracted significant attention. However, challenges such as training data scarcity and imbalance continue to hinder their development. Inspired by complex dynamic system theories, we design a series-symbol data generation mechanism, enabling the unrestricted creation of high-quality time series data paired with corresponding symbolic expressions. To leverage series-symbol data pairs with strong correlations, we develop SymTime, a pre-trained foundation model for enhancing time series representation using symbolic information. SymTime demonstrates competitive performance across five major TSA tasks when fine-tunes with downstream tasks, rivaling foundation models pre-trained on real-world datasets. This approach underscores the potential of series-symbol data generation and pretraining mechanisms in overcoming data scarcity and enhancing task performance. The code is available at https://github.com/wwhenxuan/SymTime.

Automating hardware design could obviate a significant amount of human error from the engineering process and lead to fewer errors. Verilog is a popular hardware description language to model and design digital systems, thus generating Verilog code is a critical first step. Emerging large language models (LLMs) are able to write high-quality code in other programming languages. In this paper, we characterize the ability of LLMs to generate useful Verilog. For this, we fine-tune pre-trained LLMs on Verilog datasets collected from GitHub and Verilog textbooks. We construct an evaluation framework comprising test-benches for functional analysis and a flow to test the syntax of Verilog code generated in response to problems of varying difficulty. Our findings show that across our problem scenarios, the fine-tuning results in LLMs more capable of producing syntactically correct code (25.9% overall). Further, when analyzing functional correctness, a fine-tuned open-source CodeGen LLM can outperform the state-of-the-art commercial Codex LLM (6.5% overall). Training/evaluation scripts and LLM checkpoints are available: https://github.com/shailja-thakur/VGen.