Daily Papers

The Liquid Reasoning Transformer (LRT) is a transformer architecture designed for inference with adaptive depths using iterative changes, discard-based correction, and a learned stopping mechanism. Instead of relying on a single feedforward pass, the model updates a recurrent reasoning token across multiple internal steps, allowing it to correct early errors and allocate computation based on input difficulty. We evaluate the LRT on Sudoku as a controlled testbed for structured reasoning and show that it achieves strong performance, reaching 98.68% digit accuracy and 36.30% full-puzzle accuracy without using symbolic rules or search. Analyzing internal patterns shows that the discard and stop gates play different, important roles in stabilizing inferences and adjusting computational depth. We discuss how these mechanisms extend naturally to chess-scale reasoning tasks and outline extensions for multi-token reasoning and larger domains.

Objective. Clinical AI documentation systems require evaluation methodologies that are clinically valid, economically viable, and sensitive to iterative changes. Methods requiring expert review per scoring instance are too slow and expensive for safe, iterative deployment. We present a case-specific, clinician-authored rubric methodology for clinical AI evaluation and examine whether LLM-generated rubrics can approximate clinician agreement. Materials and Methods. Twenty clinicians authored 1,646 rubrics for 823 clinical cases (736 real-world, 87 synthetic) across primary care, psychiatry, oncology, and behavioral health. Each rubric was validated by confirming that an LLM-based scoring agent consistently scored clinician-preferred outputs higher than rejected ones. Seven versions of an EHR-embedded AI agent for clinicians were evaluated across all cases. Results. Clinician-authored rubrics discriminated effectively between high- and low-quality outputs (median score gap: 82.9%) with high scoring stability (median range: 0.00%). Median scores improved from 84% to 95%. In later experiments, clinician-LLM ranking agreement (tau: 0.42-0.46) matched or exceeded clinician-clinician agreement (tau: 0.38-0.43), attributable to both ceiling compression and LLM rubric improvement. Discussion. This convergence supports incorporating LLM rubrics alongside clinician-authored ones. At roughly 1,000 times lower cost, LLM rubrics enable substantially greater evaluation coverage, while continued clinical authorship grounds evaluation in expert judgment. Ceiling compression poses a methodological challenge for future inter-rater agreement studies. Conclusion. Case-specific rubrics offer a path for clinical AI evaluation that preserves expert judgment while enabling automation at three orders lower cost. Clinician-authored rubrics establish the baseline against which LLM rubrics are validated.

Scientific and engineering progress is fundamentally a long-horizon iterative process: proposing changes, running experiments, measuring outcomes, and continuously refining artifacts. Yet existing benchmarks for frontier models primarily evaluate either single-turn responses or short-horizon agent trajectories, failing to capture the challenges of sustained iterative improvement over extended time horizons. To address this gap, we introduce AutoLab, a new benchmark for ultra long-horizon closed-loop optimization. AutoLab consists of 36 realistic, expert-curated tasks spanning four diverse domains: system optimization, puzzle & challenge, model development, and CUDA kernel optimization. Each task begins with a correct but deliberately suboptimal baseline and challenges agents to improve it within a strict wall-clock budget. Evaluating 17 state-of-the-art models reveals the dominant predictor of success is not the quality of an agent's initial attempt, but its persistence in repeatedly benchmarking, editing, and incorporating empirical feedback. While claude-opus-4.6 exhibits strong long-horizon optimization capabilities, most frontier models, including several proprietary ones, either terminate prematurely or exhaust their budgets with minimal progress. These results underscore the importance of time awareness and persistent iteration in autonomous agents. We open-source the full benchmark, evaluation harness, and task artifacts, to accelerate research toward truly capable long-horizon agents.

Hyperparameter optimization (HPO) is concerned with the automated search for the most appropriate hyperparameter configuration (HPC) of a parameterized machine learning algorithm. A state-of-the-art HPO method is Hyperband, which, however, has its own parameters that influence its performance. One of these parameters, the maximal budget, is especially problematic: If chosen too small, the budget needs to be increased in hindsight and, as Hyperband is not incremental by design, the entire algorithm must be re-run. This is not only costly but also comes with a loss of valuable knowledge already accumulated. In this paper, we propose incremental variants of Hyperband that eliminate these drawbacks, and show that these variants satisfy theoretical guarantees qualitatively similar to those for the original Hyperband with the "right" budget. Moreover, we demonstrate their practical utility in experiments with benchmark data sets.

Iterative self-distillation enables LLM agents to learn from successive deployments, offering a path toward recursive self-improvement (RSI). Yet our experiments with existing methods reveal a collapse in deployment performance across cycles, while task performance with privileged information (PI) also declines. We address this collapse by prioritizing informative interaction steps for distillation and preserving PI-conditioned behavior as the student becomes the next teacher. We introduce Retentive and Selective Augmentation for Iterative Self-Distillation (ReSAIL), a plug-in augmentation for iterative PI-based self-distillation. ReSAIL selects interaction steps where PI most strongly changes the teacher's predictions and balances the resulting distillation losses across trajectories. It also regularizes the student's PI-conditioned output distributions toward those of the frozen teacher at selected and unselected steps to preserve PI-conditioned behavior for supervision in the next cycle. On ALFWorld and TextCraft, ReSAIL sustains substantial gains across model scales over three cycles, with an average absolute gain of 22.5% in final-cycle success rates when added to self-distillation baselines. Sensitivity-guided selection of offline data also improves action prediction accuracy for multimodal GUI agents on AITZ. These findings provide the first evidence that a more robust learning mechanism can effectively mitigate performance collapse in iterative agent self-distillation over deployment trajectories.

Large Language Models (LLMs) have demonstrated strong potential in complex reasoning, yet their progress remains fundamentally constrained by reliance on massive high-quality human-curated tasks and labels, either through supervised fine-tuning (SFT) or reinforcement learning (RL) on reasoning-specific data. This dependence renders supervision-heavy training paradigms increasingly unsustainable, with signs of diminishing scalability already evident in practice. To overcome this limitation, we introduce CPMöbius (CPMobius), a collaborative Coach-Player paradigm for data-free reinforcement learning of reasoning models. Unlike traditional adversarial self-play, CPMöbius, inspired by real world human sports collaboration and multi-agent collaboration, treats the Coach and Player as independent but cooperative roles. The Coach proposes instructions targeted at the Player's capability and receives rewards based on changes in the Player's performance, while the Player is rewarded for solving the increasingly instructive tasks generated by the Coach. This cooperative optimization loop is designed to directly enhance the Player's mathematical reasoning ability. Remarkably, CPMöbius achieves substantial improvement without relying on any external training data, outperforming existing unsupervised approaches. For example, on Qwen2.5-Math-7B-Instruct, our method improves accuracy by an overall average of +4.9 and an out-of-distribution average of +5.4, exceeding RENT by +1.5 on overall accuracy and R-zero by +4.2 on OOD accuracy.

Coding agents are increasingly used as iterative development partners, but most benchmarks still evaluate one specification followed by one final assessment. This leaves out a basic question: can an agent keep its own codebase working as requirements change? We introduce EvoCode-Bench, a benchmark of 26 stateful coding tasks and 227 evaluated rounds. Each task preserves the agent's workspace for 5-15 rounds, states requirements through observable behavior, and uses cumulative executable tests to check new requirements and still-active prior ones. We evaluate 13 coding agents with two metrics: MT@4, a four-attempt fail-stop multi-round score, and SR, a single-round score from a reference-completed prior state. For most agents, SR exceeds MT@4 by 22-40 points. The gap also changes rankings: the highest-SR agent (78.9) ranks only third in persistent execution (44.0 MT@4). Even the strongest agents achieve only about 50% success on multi-turn metrics, and aggregate pass rate drops below half of round-1 performance by round 5. Failure analysis shows tier-dependent behavior: weaker agents fail early, while stronger agents survive long enough to expose specification-tracking and regression failures. We release the benchmark data and Harbor multi-turn infrastructure.

We address a persistent challenge in text-to-image models: accurately generating a specified number of objects. Current models, which learn from image-text pairs, inherently struggle with counting, as training data cannot depict every possible number of objects for any given object. To solve this, we propose optimizing the generated image based on a counting loss derived from a counting model that aggregates an object\'s potential. Employing an out-of-the-box counting model is challenging for two reasons: first, the model requires a scaling hyperparameter for the potential aggregation that varies depending on the viewpoint of the objects, and second, classifier guidance techniques require modified models that operate on noisy intermediate diffusion steps. To address these challenges, we propose an iterated online training mode that improves the accuracy of inferred images while altering the text conditioning embedding and dynamically adjusting hyperparameters. Our method offers three key advantages: (i) it can consider non-derivable counting techniques based on detection models, (ii) it is a zero-shot plug-and-play solution facilitating rapid changes to the counting techniques and image generation methods, and (iii) the optimized counting token can be reused to generate accurate images without additional optimization. We evaluate the generation of various objects and show significant improvements in accuracy. The project page is available at https://ozzafar.github.io/count_token.

Text-to-Image (T2I) models have made remarkable progress in generating images from text prompts, but their output quality and safety still depend heavily on how prompts are phrased. Existing safety methods typically refine prompts using large language models (LLMs), but they overlook the images produced, which can result in unsafe outputs or unnecessary changes to already safe prompts. To address this, we propose an iterative prompt refinement algorithm that uses Vision Language Models (VLMs) to analyze both the input prompts and the generated images. By leveraging visual feedback, our method refines prompts more effectively, improving safety while maintaining user intent and reliability comparable to existing LLM-based approaches. Additionally, we introduce a new dataset labeled with both textual and visual safety signals using off-the-shelf multi-modal LLM, enabling supervised fine-tuning. Experimental results demonstrate that our approach produces safer outputs without compromising alignment with user intent, offering a practical solution for generating safer T2I content. Our code is available at https://github.com/ku-dmlab/IPR. \textcolor{redWARNING: This paper contains examples of harmful or inappropriate images generated by models.

Large Language Models (LLMs) have demonstrated impressive capabilities, but their high computational costs pose challenges for customization. Model merging offers a cost-effective alternative, yet existing methods suffer from interference among parameters, leading to performance degradation. In this work, we propose Optimal Brain Iterative Merging (OBIM), a novel method designed to mitigate both intra-model and inter-model interference. OBIM consists of two key components: (1) A saliency measurement mechanism that evaluates parameter importance based on loss changes induced by individual weight alterations, reducing intra-model interference by preserving only high-saliency parameters. (2) A mutually exclusive iterative merging framework, which incrementally integrates models using a binary mask to avoid direct parameter averaging, thereby mitigating inter-model interference. We validate OBIM through experiments on both Supervised Fine-Tuned (SFT) models and post-pretrained checkpoints. The results show that OBIM significantly outperforms existing merging techniques. Overall, OBIM provides an effective and practical solution for enhancing LLM merging.

Instruction tuning has emerged as a critical paradigm for improving the capabilities and alignment of large language models (LLMs). However, existing iterative model-aware data selection methods incur significant computational overhead, as they rely on repeatedly performing full-dataset model inference to estimate sample utility for subsequent training iterations, creating a fundamental efficiency bottleneck. In this paper, we propose LEAD, an efficient iterative data selection framework that accurately estimates sample utility entirely within the standard training loop, eliminating the need for costly additional model inference. At its core, LEAD introduces Instance-Level Dynamic Uncertainty (IDU), a theoretically grounded utility function combining instantaneous training loss, gradient-based approximation of loss changes, and exponential smoothing of historical loss signals. To further scale efficiently to large datasets, LEAD employs a two-stage, coarse-to-fine selection strategy, adaptively prioritizing informative clusters through a multi-armed bandit mechanism, followed by precise fine-grained selection of high-utility samples using IDU. Extensive experiments across four diverse benchmarks show that LEAD significantly outperforms state-of-the-art methods, improving average model performance by 6.1%-10.8% while using only 2.5% of the training data and reducing overall training time by 5-10x.

Natural data is redundant yet predominant architectures tile computation uniformly across their input and output space. We propose the Recurrent Interface Networks (RINs), an attention-based architecture that decouples its core computation from the dimensionality of the data, enabling adaptive computation for more scalable generation of high-dimensional data. RINs focus the bulk of computation (i.e. global self-attention) on a set of latent tokens, using cross-attention to read and write (i.e. route) information between latent and data tokens. Stacking RIN blocks allows bottom-up (data to latent) and top-down (latent to data) feedback, leading to deeper and more expressive routing. While this routing introduces challenges, this is less problematic in recurrent computation settings where the task (and routing problem) changes gradually, such as iterative generation with diffusion models. We show how to leverage recurrence by conditioning the latent tokens at each forward pass of the reverse diffusion process with those from prior computation, i.e. latent self-conditioning. RINs yield state-of-the-art pixel diffusion models for image and video generation, scaling to 1024X1024 images without cascades or guidance, while being domain-agnostic and up to 10X more efficient than 2D and 3D U-Nets.

We propose a structural default model for portfolio-wide valuation adjustments (xVAs) and represent it as a system of coupled backward stochastic differential equations. The framework is divided into four layers, each capturing a key component: (i) clean values, (ii) initial margin and Collateral Valuation Adjustment (ColVA), (iii) Credit/Debit Valuation Adjustments (CVA/DVA) together with Margin Valuation Adjustment (MVA), and (iv) Funding Valuation Adjustment (FVA). Because these layers depend on one another through collateral and default effects, a naive Monte Carlo approach would require deeply nested simulations, making the problem computationally intractable. To address this challenge, we use an iterative deep BSDE approach, handling each layer sequentially so that earlier outputs serve as inputs to the subsequent layers. Initial margin is computed via deep quantile regression to reflect margin requirements over the Margin Period of Risk. We also adopt a change-of-measure method that highlights rare but significant defaults of the bank or counterparty, ensuring that these events are accurately captured in the training process. We further extend Han and Long's (2020) a posteriori error analysis to BSDEs on bounded domains. Due to the random exit from the domain, we obtain an order of convergence of O(h^{1/4-epsilon}) rather than the usual O(h^{1/2}). Numerical experiments illustrate that this method drastically reduces computational demands and successfully scales to high-dimensional, non-symmetric portfolios. The results confirm its effectiveness and accuracy, offering a practical alternative to nested Monte Carlo simulations in multi-counterparty xVA analyses.

Amazing progress has been made in controllable generative modeling, especially over the last few years. However, some challenges remain. One of them is precise and iterative object editing. In many of the current methods, trying to edit the generated image (for example, changing the color of a particular object in the scene or changing the background while keeping other elements unchanged) by changing the conditioning signals often leads to unintended global changes in the scene. In this work, we take the first steps to address the above challenges. Taking inspiration from the Universal Scene Descriptor (USD) standard developed in the computer graphics community, we introduce the "Neural Universal Scene Descriptor" or Neural USD. In this framework, we represent scenes and objects in a structured, hierarchical manner. This accommodates diverse signals, minimizes model-specific constraints, and enables per-object control over appearance, geometry, and pose. We further apply a fine-tuning approach which ensures that the above control signals are disentangled from one another. We evaluate several design considerations for our framework, demonstrating how Neural USD enables iterative and incremental workflows. More information at: https://escontrela.me/neural_usd .

Instruction-guided image editing offers an intuitive way for users to edit images with natural language. However, diffusion-based editing models often struggle to accurately interpret complex user instructions, especially those involving compositional relationships, contextual cues, or referring expressions, leading to edits that drift semantically or fail to reflect the intended changes. We tackle this problem by proposing MIRA (Multimodal Iterative Reasoning Agent), a lightweight, plug-and-play multimodal reasoning agent that performs editing through an iterative perception-reasoning-action loop, effectively simulating multi-turn human-model interaction processes. Instead of issuing a single prompt or static plan, MIRA predicts atomic edit instructions step by step, using visual feedback to make its decisions. Our 150K multimodal tool-use dataset, MIRA-Editing, combined with a two-stage SFT + GRPO training pipeline, enables MIRA to perform reasoning and editing over complex editing instructions. When paired with open-source image editing models such as Flux.1-Kontext, Step1X-Edit, and Qwen-Image-Edit, MIRA significantly improves both semantic consistency and perceptual quality, achieving performance comparable to or exceeding proprietary systems such as GPT-Image and Nano-Banana.

Repository-level software engineering (SWE) comprises heterogeneous task categories, whose progress under pooled agentic reinforcement learning can be uneven: gains in some categories coincide with regressions in others, while aggregate resolution obscures these changes. Motivated by this category see-saw, we develop a category-aware expert-training and policy-integration framework. Executable task construction and SWE Labeler, an evidence-grounded multi-axis labeling system, organize the training pools. Initial category-specific RL improves average training success while leaving uneven instance-level progress, motivating explicit consolidation of successful behavior and policy-adaptive task selection. Same-origin category experts alternate long-horizon Agentic-miniRL with Refresh-Repair-Expand (RRE): the updated policy refreshes instance mastery, reuses its own verified successful trajectories for Repair SFT, and reselects tasks for further RL. Label-routed multi-teacher on-policy distillation (MOPD) consolidates the experts into one deployable student, with ReLU-gated reward extrapolation keeping only each teacher's improving direction over the reference. Expert training and policy integration require no external model to provide solution trajectories or action targets. We evaluate Pooled RL and Balanced RL, expert development, and single-model integration through aggregate and per-category resolution, the minimum category lift over each joint-RL baseline, and expert-gain recovery. The final MOPD policy achieves mean resolution of 58.04% on Pro-618 and 59.00% on SWE-bench Multilingual, improving over the base model by 5.39 and 2.78 percentage points, respectively.

Recent prompt-based image editing models have demonstrated impressive prompt-following capability at structural editing tasks. However, existing models still fail to perform local edits, follow detailed editing prompts, or maintain global image quality beyond a single editing step. To address these challenges, we introduce SPICE, a training-free workflow that accepts arbitrary resolutions and aspect ratios, accurately follows user requirements, and improves image quality consistently during more than 100 editing steps. By synergizing the strengths of a base diffusion model and a Canny edge ControlNet model, SPICE robustly handles free-form editing instructions from the user. SPICE outperforms state-of-the-art baselines on a challenging realistic image-editing dataset consisting of semantic editing (object addition, removal, replacement, and background change), stylistic editing (texture changes), and structural editing (action change) tasks. Not only does SPICE achieve the highest quantitative performance according to standard evaluation metrics, but it is also consistently preferred by users over existing image-editing methods. We release the workflow implementation for popular diffusion model Web UIs to support further research and artistic exploration.

Monocular metric depth estimation (MMDE) is a crucial task to solve for indoor scene reconstruction on edge devices. Despite this importance, existing models are sensitive to factors such as boundary frequency of objects in the scene and scene complexity, failing to fully capture many indoor scenes. In this work, we propose to close this gap through the task of monocular metric depth refinement (MMDR) by leveraging state-of-the-art MMDE models. MultiDepth proposes a solution by taking samples of the image along with the initial depth map prediction made by a pre-trained MMDE model. Compared to existing iterative depth refinement techniques, MultiDepth does not employ normal map prediction as part of its architecture, effectively lowering the model size and computation overhead while outputting impactful changes from refining iterations. MultiDepth implements a lightweight encoder-decoder architecture for the refinement network, processing multiple samples from the given image, including segmentation masking. We evaluate MultiDepth on four datasets and compare them to state-of-the-art methods to demonstrate its effective refinement with minimal overhead, displaying accuracy improvement upward of 45%.

While reasoning on autoregressive (AR) models is often performed by chain-of-thought reasoning and reflection, their refinement of previous outputs still relies on fully sequential generation, even when only local edits are needed. In contrast, the masking mechanism in Mask Diffusion Models (MDMs) naturally supports explicit local edits on previous outputs, allowing selective refinement without discarding previous answers and generating another from scratch. While this property more closely aligns with how humans correct mistakes by iterative local refinement, existing MDMs do not support multi-turn masking and denoising. We propose Reflective Masking (RM), which elicits such an intrinsic reasoning capability in MDMs via lightweight post-training. RM provides a native test-time scaling, where an MDM iteratively revisits and revises its prior outputs based on evolving context. To exploit insights from previous turns like AR reasoning, we further introduce History Reference, a parameter-free mechanism that leverages intermediate denoising states during revision. Our approach requires no architectural changes and is easily applicable to existing MDMs. Across diverse tasks and modalities, including text generation, Sudoku, and image editing, Reflective Masking consistently outperforms standard masking-based baselines and demonstrates strong generality, positioning RM as a fundamental primitive for reasoning on MDMs.

The performance of LLM-based agents is jointly shaped by their base models and the harnesses that mediate their interaction with the environment. Because different models exhibit distinct behaviors, effective harness design is inherently model-specific. Yet agent harnesses are still largely engineered by human experts, a paradigm that scales poorly as modern LLMs become increasingly diverse and rapidly evolving. In this paper, we introduce Self-Harness, a new paradigm in which an LLM-based agent improves its own operating harness, without relying on human engineers or stronger external agents. We operationalize Self-Harness as an iterative loop with three stages: Weakness Mining, which identifies model-specific failure patterns from execution traces; Harness Proposal, which generates diverse yet minimal harness modifications tied to these failures; and Proposal Validation, which accepts candidate edits only after regression testing. We instantiate Self-Harness on Terminal-Bench-2.0 using a minimal initial harness and three base models from diverse families: MiniMax M2.5, Qwen3.5-35B-A3B, and GLM-5. Across all three models, Self-Harness consistently improves performance, with held-out pass rates increasing from 40.5% to 61.9%, 23.8% to 38.1%, and 42.9% to 57.1%, respectively. Qualitative analyses further show that Self-Harness does not simply add generic instructions, but effectively turns model-specific weaknesses into concrete, executable harness changes. These results suggest a path toward LLM-based agents that are not merely shaped by their harnesses, but can also participate in reshaping them.

Though modern AI models like LLMs predict discrete tokens, today's robotic foundation models represent actions as continuous vectors. In this paper, we challenge this common consensus by asking if continuous action parametrizations are superior to their discrete counterparts. We conduct an extensive comparison of single-step regression and multi-step flow variants of both continuous and discrete policies in both from-scratch single-task and multi-task VLA training, in both simulation and on real hardware. In all regimes, we find that discrete action prediction, even the most naive, uniform-bin quantization, can match or even outperform continuous-action policies in task success rate. Moreover, we find that the challenge to discrete action policies is not action precision, but rather factorization error introduced by product-distribution predictions across time and action dimensions. We show that, when paired with the correct interventions---iterative computation through discrete flows, or distribution sharpening through classifier-free guidance---discrete flow policies can turn this weakness into a strength, enabling more responsive action changes during a predicted action chunk. Lastly, we show that attempts to explicitly inject geometric information into discrete policies, e.g. through corruption processes that emulate continuous flow matching, do not yield consistent improvements. Taken together, our findings question existing assumptions that robotic action prediction requires distinct design decisions compared to other AI domains, and motivates the possibility of discrete action prediction as a compelling alternative to today's continuous action parametrizations. Link for the webpage https://iscoyizj.github.io/discrete-action-website/{https://iscoyizj.github.io/discrete-action-website/}

Instruction-based image editing enables natural-language control over visual modifications, yet existing models falter under Instruction-Visual Complexity (IV-Complexity), where intricate instructions meet cluttered or ambiguous scenes. We introduce RePlan (Region-aligned Planning), a plan-then-execute framework that couples a vision-language planner with a diffusion editor. The planner decomposes instructions via step-by-step reasoning and explicitly grounds them to target regions; the editor then applies changes using a training-free attention-region injection mechanism, enabling precise, parallel multi-region edits without iterative inpainting. To strengthen planning, we apply GRPO-based reinforcement learning using 1K instruction-only examples, yielding substantial gains in reasoning fidelity and format reliability. We further present IV-Edit, a benchmark focused on fine-grained grounding and knowledge-intensive edits. Across IV-Complex settings, RePlan consistently outperforms strong baselines trained on far larger datasets, improving regional precision and overall fidelity. Our project page: https://replan-iv-edit.github.io

As LLM-based agents are deployed in increasingly complex real-world settings, existing benchmarks underrepresent key challenges such as enforcing global constraints, coordinating multi-tool reasoning, and adapting to evolving user behavior over long, multi-turn interactions. To bridge this gap, we introduce TRIP-Bench, a long-horizon benchmark grounded in realistic travel-planning scenarios. TRIP-Bench leverages real-world data, offers 18 curated tools and 40+ travel requirements, and supports automated evaluation. It includes splits of varying difficulty; the hard split emphasizes long and ambiguous interactions, style shifts, feasibility changes, and iterative version revision. Dialogues span up to 15 user turns, can involve 150+ tool calls, and may exceed 200k tokens of context. Experiments show that even advanced models achieve at most 50\% success on the easy split, with performance dropping below 10\% on hard subsets. We further propose GTPO, an online multi-turn reinforcement learning method with specialized reward normalization and reward differencing. Applied to Qwen2.5-32B-Instruct, GTPO improves constraint satisfaction and interaction robustness, outperforming Gemini-3-Pro in our evaluation. We expect TRIP-Bench to advance practical long-horizon interactive agents, and GTPO to provide an effective online RL recipe for robust long-horizon training.

Existing auto-research benchmarks often entangle multiple sources of improvement, including training frameworks, hyperparameters, compute budgets, and data, making it difficult to attribute why one frontier agent outperforms another to specific research capabilities. In this work, we isolate and systematically evaluate Data Intelligence: an agent's ability to understand, manipulate, and improve the data that shapes model capabilities. We introduce AutoDataBench, a controlled testbed built on a conceptual framework of data intelligence spanning data diagnosis, data organization, and data construction, instantiated through three highly curated optimization tasks while holding non-data factors fixed. Across tool use, retrieval, and knowledge injection, we evaluate frontier LLMs' ability to improve training data through iterative experimentation under task-specific resource budgets. Beyond optimization performance, we ask: do LLMs understand what their data interventions do? We compare predictions made before training with observed outcomes to seek evidence of data-effect reasoning beyond trial and error, and explore whether iterative feedback helps LLMs better understand how changes to training data affect model performance. Finally, we show that reusing AutoDataBench trajectories for mid-training improves downstream coding performance, highlighting its value in both evaluating data intelligence and generating high-quality training data. Code and resources are available at https://github.com/AutoDataBench/AutoDataBench.

Generative image models produce striking visuals yet often misrepresent culture. Prior work has examined cultural bias mainly in text-to-image (T2I) systems, leaving image-to-image (I2I) editors underexplored. We bridge this gap with a unified evaluation across six countries, an 8-category/36-subcategory schema, and era-aware prompts, auditing both T2I generation and I2I editing under a standardized protocol that yields comparable diagnostics. Using open models with fixed settings, we derive cross-country, cross-era, and cross-category evaluations. Our framework combines standard automatic metrics, a culture-aware retrieval-augmented VQA, and expert human judgments collected from native reviewers. To enable reproducibility, we release the complete image corpus, prompts, and configurations. Our study reveals three findings: (1) under country-agnostic prompts, models default to Global-North, modern-leaning depictions that flatten cross-country distinctions; (2) iterative I2I editing erodes cultural fidelity even when conventional metrics remain flat or improve; and (3) I2I models apply superficial cues (palette shifts, generic props) rather than era-consistent, context-aware changes, often retaining source identity for Global-South targets. These results highlight that culture-sensitive edits remain unreliable in current systems. By releasing standardized data, prompts, and human evaluation protocols, we provide a reproducible, culture-centered benchmark for diagnosing and tracking cultural bias in generative image models.

Revision is an essential part of the human writing process. It tends to be strategic, adaptive, and, more importantly, iterative in nature. Despite the success of large language models on text revision tasks, they are limited to non-iterative, one-shot revisions. Examining and evaluating the capability of large language models for making continuous revisions and collaborating with human writers is a critical step towards building effective writing assistants. In this work, we present a human-in-the-loop iterative text revision system, Read, Revise, Repeat (R3), which aims at achieving high quality text revisions with minimal human efforts by reading model-generated revisions and user feedbacks, revising documents, and repeating human-machine interactions. In R3, a text revision model provides text editing suggestions for human writers, who can accept or reject the suggested edits. The accepted edits are then incorporated into the model for the next iteration of document revision. Writers can therefore revise documents iteratively by interacting with the system and simply accepting/rejecting its suggested edits until the text revision model stops making further revisions or reaches a predefined maximum number of revisions. Empirical experiments show that R3 can generate revisions with comparable acceptance rate to human writers at early revision depths, and the human-machine interaction can get higher quality revisions with fewer iterations and edits. The collected human-model interaction dataset and system code are available at https://github.com/vipulraheja/IteraTeR. Our system demonstration is available at https://youtu.be/lK08tIpEoaE.

Iterative repair loops have become a core design pattern in LLM-based software engineering systems. These workflows repeatedly generate, validate, and repair artifacts using feedback such as compiler errors or test failures. Despite their widespread use, the impact of repair-loop iteration limits remains poorly understood, as most prior work adopts fixed, often arbitrary, repair budgets. We study repair-loop effectiveness across multiple software engineering tasks, including code generation, test generation, and code translation. Across several representative workflows, datasets, and contemporary low-cost LLMs, we observe a consistent pattern of diminishing returns: the first three to four repair iterations account for most achievable gains, while later iterations contribute only marginal improvements. We further find that repair behavior is influenced more strongly by workflow orchestration and feedback design than by the underlying model itself. These results suggest that repair budgets should be treated as an explicit experimental variable, as they directly affect evaluation outcomes, computational cost, runtime, and reproducibility in LLM-based software engineering research.

Iterative text revision improves text quality by fixing grammatical errors, rephrasing for better readability or contextual appropriateness, or reorganizing sentence structures throughout a document. Most recent research has focused on understanding and classifying different types of edits in the iterative revision process from human-written text instead of building accurate and robust systems for iterative text revision. In this work, we aim to build an end-to-end text revision system that can iteratively generate helpful edits by explicitly detecting editable spans (where-to-edit) with their corresponding edit intents and then instructing a revision model to revise the detected edit spans. Leveraging datasets from other related text editing NLP tasks, combined with the specification of editable spans, leads our system to more accurately model the process of iterative text refinement, as evidenced by empirical results and human evaluations. Our system significantly outperforms previous baselines on our text revision tasks and other standard text revision tasks, including grammatical error correction, text simplification, sentence fusion, and style transfer. Through extensive qualitative and quantitative analysis, we make vital connections between edit intentions and writing quality, and better computational modeling of iterative text revisions.

Continual skill evolution enables LLM agents to accumulate and refine reusable procedural knowledge from interaction experience without updating model parameters. Its effectiveness depends on determining not only what to change, but also why a change is justified and when it should become persistent guidance. However, existing experience-driven methods can lose the behavioral evidence and task contexts supporting edits. Moreover, a global validation outcome provides an incomplete judgment of its constituent changes: locally supported corrections may be discarded with a rejected revision, while evidence may require further experience to inform useful updates. To this end, we introduce EVISKILL, an evidence-driven framework that organizes execution observations into Replayable Evidence Cards and synthesizes edits with explicit links to their supporting contexts. Targeted replay verifies these edits through re-execution and provides feedback for correction. Across epochs, EVISKILL preserves evidence and provisionally retains supported edits for further refinement, while global validation governs their incorporation into the final skill. Experiments on three interactive benchmarks across six LLM backbones demonstrate the effectiveness of this approach.

Large language models (LLMs) can suggest missing elements from items listed in a prompt, which can be used for list completion or recommendations based on users' history. However, their performance degrades when presented with too many items, as they start to suggest items already included in the input list. This occurs at around 100 items for mid-2024 flagship LLMs. We evaluate this phenomenon on both synthetic problems (e.g., finding missing numbers in a given range of shuffled integers) and realistic movie recommendation scenarios. We refer to this issue as attention overflow, as preventing repetition requires attending to all items simultaneously. Although iterative loops can mitigate this problem, their costs increase with the repetition rate, affecting the language models' ability to derive novelty from lengthy inputs.

Writing is, by nature, a strategic, adaptive, and more importantly, an iterative process. A crucial part of writing is editing and revising the text. Previous works on text revision have focused on defining edit intention taxonomies within a single domain or developing computational models with a single level of edit granularity, such as sentence-level edits, which differ from human's revision cycles. This work describes IteraTeR: the first large-scale, multi-domain, edit-intention annotated corpus of iteratively revised text. In particular, IteraTeR is collected based on a new framework to comprehensively model the iterative text revisions that generalize to various domains of formal writing, edit intentions, revision depths, and granularities. When we incorporate our annotated edit intentions, both generative and edit-based text revision models significantly improve automatic evaluations. Through our work, we better understand the text revision process, making vital connections between edit intentions and writing quality, enabling the creation of diverse corpora to support computational modeling of iterative text revisions.

When we speak of recursive self-improvement (RSI), are we speaking of a phenomenon, a mechanism, or a prospect? Towards autonomous and evolving intelligence, RSI is being claimed at many scales, while no single framework that formally describes these emerging instances exists. Its counterpart in the classical realm, iterative policy improvement, is characterized by generalized policy iteration (GPI), a framework of broad applicability with well-understood theoretical properties, but only where the update principle and the evaluation base lie outside the agent. In this paper, we propose Generalized Agent Iteration (GAI), a formal framework that describes iterative policy improvement and RSI as two cases of a single learning paradigm. GAI defines the agent as a configuration of modifiable components within a system and models the learning process as a cycle of agent evaluation and agent improvement. Two pivotal dials then distinguish the instances: whether the improving mechanism is part of the agent and whether the standard it is measured against is grounded outside it. The former dial delineates the boundary between GPI and RSI, and the latter determines a system's polarity as anchored, goal drift, or fully self-referential. Moreover, we use these coordinates to place existing systems on the same two axes and make the defects of recursive self-improvement statable one condition at a time. We see this paper as a first step toward exploring a formal characterization of RSI that rests on the classical account, makes existing systems comparable, and provides a principled basis for analyzing and designing new ones.

Many real world learning tasks involve complex or hard-to-specify objectives, and using an easier-to-specify proxy can lead to poor performance or misaligned behavior. One solution is to have humans provide a training signal by demonstrating or judging performance, but this approach fails if the task is too complicated for a human to directly evaluate. We propose Iterated Amplification, an alternative training strategy which progressively builds up a training signal for difficult problems by combining solutions to easier subproblems. Iterated Amplification is closely related to Expert Iteration (Anthony et al., 2017; Silver et al., 2017), except that it uses no external reward function. We present results in algorithmic environments, showing that Iterated Amplification can efficiently learn complex behaviors.

Classical continual learning (CL) has primarily focused on enabling models to update and retain knowledge through parameter-centric mechanisms, e.g., training strategies, architectural designs, and weight adaptation. However, emerging paradigms are reshaping the scope of CL beyond this traditional model adaptation view. For instance, on-policy learning broadens the space of update mechanisms; test-time training extends CL from the training phase to inference; and external harness components such as memory, skill libraries, and interaction protocols extend the evolutionary boundaries of model capabilities far beyond the static parameter space. Collectively, these developments indicate a transition from parameter-centric learning toward system-level adaptation. To characterize this transition, we examine the evolution of continual learning through three dimensions: When, How, and Where learning occurs. The How dimension encompasses off-policy, on-policy, and beyond-gradient optimization mechanics. The When dimension captures evolution across pre-training, post-training, and inference-time stages. The Where dimension delineates updates occurring within internal parameters versus external structural constraints. Anchored by this tri-axial framework, we systematically survey representative methods, trace the ongoing transition of continual learning, and discuss the key challenges, broader implications, and future directions arising from this paradigm shift.

This study examined code issue detection and revision automation by integrating Large Language Models (LLMs) such as OpenAI's GPT-3.5 Turbo and GPT-4o into software development workflows. A static code analysis framework detects issues such as bugs, vulnerabilities, and code smells within a large-scale software project. Detailed information on each issue was extracted and organized to facilitate automated code revision using LLMs. An iterative prompt engineering process is applied to ensure that prompts are structured to produce accurate and organized outputs aligned with the project requirements. Retrieval-augmented generation (RAG) is implemented to enhance the relevance and precision of the revisions, enabling LLM to access and integrate real-time external knowledge. The issue of LLM hallucinations - where the model generates plausible but incorrect outputs - is addressed by a custom-built "Code Comparison App," which identifies and corrects erroneous changes before applying them to the codebase. Subsequent scans using the static code analysis framework revealed a significant reduction in code issues, demonstrating the effectiveness of combining LLMs, static analysis, and RAG to improve code quality, streamline the software development process, and reduce time and resource expenditure.

Recursive self-improvement (RSI) describes a system that improves not only its behavior but also the process by which it improves. Recent digital agents test this idea by rewriting their own code and checking each version with executable tests. Bringing these mechanisms into the physical world requires learning from partial observations through costly trials, while accounting for changing operating conditions and potentially irreversible consequences. We position RSI within robot learning and trace pathways from improving robot capabilities to improving the processes that generate them. We examine how physical experience can strengthen these improvement mechanisms and when the resulting gains can support further self-improvement of the mechanisms themselves. Gains carry forward only when feedback addresses remaining learning needs, the receiving component can use the change, its value survives changes in tasks or hardware, and continued practice remains safe and affordable. Existing studies, concentrated in manipulation, support behavioral improvement, benefits to later learning, and procedure improvement. Some systems also change the improver's knowledge or tools, but the physical studies reviewed here have yet to isolate gains attributable to recursion. We synthesize these findings into evaluation principles and research directions for machines that, trial by trial, safely improve the way they improve.

Class-incremental learning (CIL) aims to enable models to continuously learn new classes while overcoming catastrophic forgetting. The introduction of pre-trained models has brought new tuning paradigms to CIL. In this paper, we revisit different parameter-efficient tuning (PET) methods within the context of continual learning. We observe that adapter tuning demonstrates superiority over prompt-based methods, even without parameter expansion in each learning session. Motivated by this, we propose incrementally tuning the shared adapter without imposing parameter update constraints, enhancing the learning capacity of the backbone. Additionally, we employ feature sampling from stored prototypes to retrain a unified classifier, further improving its performance. We estimate the semantic shift of old prototypes without access to past samples and update stored prototypes session by session. Our proposed method eliminates model expansion and avoids retaining any image samples. It surpasses previous pre-trained model-based CIL methods and demonstrates remarkable continual learning capabilities. Experimental results on five CIL benchmarks validate the effectiveness of our approach, achieving state-of-the-art (SOTA) performance.

Modern language models are likely to be updated throughout their lifetime rather than trained once and frozen. Each update therefore participates in a recurring cycle: decide which experience to learn from, understand what that update changes, and remain capable of learning from what comes next. We show that these challenges are governed by the same evolving update--behavior interaction. We derive a token- and layer-wise decomposition of how learning from one token changes another prediction. By separating the softmax force, shared readout geometry, and residual connections, it exposes two interaction channels and yields a forward-computable approximation. Following this interaction through time reveals a unified picture of continual adaptation. Positive interaction identifies useful experience; negative interaction produces either concentrated collision or accumulated erosion; over longer horizons, updates reshape the shared geometry mediating future learning signals, reducing their transmission. These predictions lead to effective data selection, mechanism-specific controls for interference, and a readout-based diagnostic of future learnability whose degradation predicts the benefit of restoring the readout. Across models and training regimes, the same local interaction thus explains both what an update changes now and how learning today changes what can be learned tomorrow. This view connects data attribution, forgetting, and plasticity loss as distinct regimes of the same evolving learning dynamics.

Iterative retrieval refers to the process in which the model continuously queries the retriever during generation to enhance the relevance of the retrieved knowledge, thereby improving the performance of Retrieval-Augmented Generation (RAG). Existing work typically employs few-shot prompting or manually constructed rules to implement iterative retrieval. This introduces additional inference overhead and overlooks the remarkable reasoning capabilities of Large Language Models (LLMs). In this paper, we introduce Auto-RAG, an autonomous iterative retrieval model centered on the LLM's powerful decision-making capabilities. Auto-RAG engages in multi-turn dialogues with the retriever, systematically planning retrievals and refining queries to acquire valuable knowledge. This process continues until sufficient external information is gathered, at which point the results are presented to the user. To this end, we develop a method for autonomously synthesizing reasoning-based decision-making instructions in iterative retrieval and fine-tuned the latest open-source LLMs. The experimental results indicate that Auto-RAG is capable of autonomous iterative interaction with the retriever, effectively leveraging the remarkable reasoning and decision-making abilities of LLMs, which lead to outstanding performance across six benchmarks. Further analysis reveals that Auto-RAG can autonomously adjust the number of iterations based on the difficulty of the questions and the utility of the retrieved knowledge, without requiring any human intervention. Moreover, Auto-RAG expresses the iterative retrieval process in natural language, enhancing interpretability while providing users with a more intuitive experienceCode is available at \url{https://github.com/ictnlp/Auto-RAG.

We introduce a unified framework for iterative reasoning that leverages non-Euclidean geometry via Bregman divergences, higher-order operator averaging, and adaptive feedback mechanisms. Our analysis establishes that, under mild smoothness and contractivity assumptions, a generalized update scheme not only unifies classical methods such as mirror descent and dynamic programming but also captures modern chain-of-thought reasoning processes in large language models. In particular, we prove that our accelerated iterative update achieves an O(1/t^2) convergence rate in the absence of persistent perturbations, and we further demonstrate that feedback (iterative) architectures are necessary to approximate certain fixed-point functions efficiently. These theoretical insights bridge classical acceleration techniques with contemporary applications in neural computation and optimization.

Low-Rank Adaptive Residual Connections (LARC) give a frozen model a compact numerical state that can learn from feedback. The map h+BAh adds a low-rank correction to a hidden representation. A slow state ρ learns starting factors across tasks; a private fast state Φ copies them, changes with feedback, and resets to the trained initialization. This report specifies an input-side realization of the numerical policy carrier in Memory-Mediated Learning Architecture and examines its factor-space dynamics and learning lifetime. We study a rank-4 input residual with 12,288 trainable parameters on a frozen MiniCPM5-1B-SFT substrate. In a four-candidate program-selection task, two feedback-gradient steps reduce expected query execution error by 24.65 and 36.65 percentage points relative to resetting to the respective trained static and post-adaptation initializations. These development results cover 16 parameter groups and three paired training seeds. A direct support-loss selection rule is much more accurate, reaching 0.78125% error. In a repository-balanced chronological replay of public continuous-integration jobs, retaining online updates raises half-Brier loss from 0.1274 to 0.1808. A fixed follow-up intervention records same-batch non-descent and inconsistent future benefit from shrinking updates. Together, the algebra and measurements distinguish residual capacity, adaptation relative to a starting point, and usefulness on later decisions.

Incremental Task learning (ITL) is a category of continual learning that seeks to train a single network for multiple tasks (one after another), where training data for each task is only available during the training of that task. Neural networks tend to forget older tasks when they are trained for the newer tasks; this property is often known as catastrophic forgetting. To address this issue, ITL methods use episodic memory, parameter regularization, masking and pruning, or extensible network structures. In this paper, we propose a new incremental task learning framework based on low-rank factorization. In particular, we represent the network weights for each layer as a linear combination of several rank-1 matrices. To update the network for a new task, we learn a rank-1 (or low-rank) matrix and add that to the weights of every layer. We also introduce an additional selector vector that assigns different weights to the low-rank matrices learned for the previous tasks. We show that our approach performs better than the current state-of-the-art methods in terms of accuracy and forgetting. Our method also offers better memory efficiency compared to episodic memory- and mask-based approaches. Our code will be available at https://github.com/CSIPlab/task-increment-rank-update.git

Real-world deployment of machine learning models is challenging because data evolves over time. While no model can work when data evolves in an arbitrary fashion, if there is some pattern to these changes, we might be able to design methods to address it. This paper addresses situations when data evolves gradually. We introduce a time-varying propensity score that can detect gradual shifts in the distribution of data which allows us to selectively sample past data to update the model -- not just similar data from the past like that of a standard propensity score but also data that evolved in a similar fashion in the past. The time-varying propensity score is quite general: we demonstrate different ways of implementing it and evaluate it on a variety of problems ranging from supervised learning (e.g., image classification problems) where data undergoes a sequence of gradual shifts, to reinforcement learning tasks (e.g., robotic manipulation and continuous control) where data shifts as the policy or the task changes.

The ability to learn different tasks sequentially is essential to the development of artificial intelligence. In general, neural networks lack this capability, the major obstacle being catastrophic forgetting. It occurs when the incrementally available information from non-stationary data distributions is continually acquired, disrupting what the model has already learned. Our approach remembers old tasks by projecting the representations of new tasks close to that of old tasks while keeping the decision boundaries unchanged. We employ the center loss as a regularization penalty that enforces new tasks' features to have the same class centers as old tasks and makes the features highly discriminative. This, in turn, leads to the least forgetting of already learned information. This method is easy to implement, requires minimal computational and memory overhead, and allows the neural network to maintain high performance across many sequentially encountered tasks. We also demonstrate that using the center loss in conjunction with the memory replay outperforms other replay-based strategies. Along with standard MNIST variants for continual learning, we apply our method to continual domain adaptation scenarios with the Digits and PACS datasets. We demonstrate that our approach is scalable, effective, and gives competitive performance compared to state-of-the-art continual learning methods.

Automatic academic paper-to-slide generation is inherently iterative, because creating an effective presentation requires repeated cycles of generation, critique, and revision. Recent multi-agent systems partially acknowledge this through internal critique-and-revise loops, while conversational approaches allow users to refine generated slide decks through dialog. However, these refinement processes either remain largely closed to the user or introduce feedback only after a complete deck has been produced, limiting the user's ability to participate in the iterative refinement of narrative flow, content allocation, and presentation emphasis. To address this gap, we introduce ConvDeck, a multi-agent pipeline for conversational paper-to-slide generation that distributes interaction across the pipeline through stage-specific loops, allowing users to iteratively refine both the presentation outline and the final slide deck at the stages where each kind of decision is made. These loops are driven by a refinement mechanism in which agents can think, speak, and act, enabling them to either directly apply edits or respond conversationally to clarify user feedback and discuss revision options. Our evaluation shows that stage-specific conversational feedback improves user-goal satisfaction while preserving narrative coherence, content quality, and visual presentation.

Iterative methods are ubiquitous in large-scale scientific computing applications, and a number of approaches based on meta-learning have been recently proposed to accelerate them. However, a systematic study of these approaches and how they differ from meta-learning is lacking. In this paper, we propose a framework to analyze such learning-based acceleration approaches, where one can immediately identify a departure from classical meta-learning. We show that this departure may lead to arbitrary deterioration of model performance. Based on our analysis, we introduce a novel training method for learning-based acceleration of iterative methods. Furthermore, we theoretically prove that the proposed method improves upon the existing methods, and demonstrate its significant advantage and versatility through various numerical applications.

Coding agents can answer analytical questions over a data lake by discovering, cleaning, and joining the relevant data. However, they discard this work after each question and redo it from scratch for the next one. Tool evolution, which automatically builds and refines reusable tools across tasks, is a natural fit for this repetition. Since a ground-truth label for a data-lake question requires an expert to solve it first, we consider the unsupervised setting. We propose TEAL (Tool Evolution for Analytics over data Lakes), which evolves a library of tools and usage skills for a given Worker agent without labels. Two agents propose tools from complementary evidence, an Explorer from the data lake itself and a Critic from Worker trajectories. A proposed change is kept only if the Worker adopts the tool on a rerun without extra steps and any changed answer is supported by trajectory evidence. We also introduce TEAL-Q, which generates synthetic questions for tool evolution when real ones are unavailable. We evaluate on KramaBench and LakeQA with four Worker LLMs under step budgets, which cap the number of steps the Worker may take per question. With a tight budget of 10 or 15 steps, TEAL improves every Worker on both benchmarks, lifting Sonnet-5 at 15 steps by 9.3 points on KramaBench and 21.7 points on LakeQA. A tighter budget also yields better feedback for evolution. For example, Sonnet-5's LakeQA library evolved at 20 steps and deployed unchanged at 30 steps scores 68.3, above both the baseline (59.6) and a library evolved directly at 30 steps (64.2). Additionally, a library evolved on synthetic questions performs comparably to one evolved on real questions. These results show that useful tools can be evolved without labels, and hopefully inspire future work on what to evolve and how to obtain feedback in unsupervised agent evolution.

Harness self-evolution revises an agent's software scaffolding, including prompts, memory, workflows, and executable components, while keeping model weights fixed. We formalize a feedback-driven process in which accepted revisions persist across runs. The framework separates update targets from proposal and admission mechanisms. It distinguishes changes to interpreted state from revisions to tools and code, repository-level control logic, and plugin composition. We characterize search through evolutionary optimization and examine its reliability through continual PAC-learning. Under explicit assumptions, the analysis yields an expected generalization bound, a retention bound conditional on historical regression budgets, and a high-probability admission rule using fresh, independent validation data. We examine how persistent harness revisions affect knowledge sharing and organizational workflows, with implications for scientific reliability, physical safety, and institutional accountability. Cases from prior work illustrate model--harness co-design, distributed execution, and plugin reuse. Reliable deployment requires continual validation as task distributions and evaluators change, with independent safeguards for learning, runtime privileges, and consequential actions. We provide a comprehensive 66-page discussion of related work, theory, algorithms, evaluation, applications, and the broader impact of Harness RSI, together with continuously updated code and supplementary materials, at https://github.com/zgcagi/Harness-RSI.

With software maintenance accounting for 50% of the cost of developing software, enhancing code quality and reliability has become more critical than ever. In response to this challenge, this doctoral research proposal aims to explore innovative solutions by focusing on the deployment of agents powered by Large Language Models (LLMs) to perform software maintenance tasks. The iterative nature of agents, which allows for continuous learning and adaptation, can help surpass common challenges in code generation. One distinct challenge is the last-mile problems, errors at the final stage of producing functionally and contextually relevant code. Furthermore, this project aims to surpass the inherent limitations of current LLMs in source code through a collaborative framework where agents can correct and learn from each other's errors. We aim to use the iterative feedback in these systems to further fine-tune the LLMs underlying the agents, becoming better aligned to the task of automated software improvement. Our main goal is to achieve a leap forward in the field of automatic software improvement by developing new tools and frameworks that can enhance the efficiency and reliability of software development.

We introduce Memento-Skills, a generalist, continually-learnable LLM agent system that functions as an agent-designing agent: it autonomously constructs, adapts, and improves task-specific agents through experience. The system is built on a memory-based reinforcement learning framework with stateful prompts, where reusable skills (stored as structured markdown files) serve as persistent, evolving memory. These skills encode both behaviour and context, enabling the agent to carry forward knowledge across interactions. Starting from simple elementary skills (like Web search and terminal operations), the agent continually improves via the Read--Write Reflective Learning mechanism introduced in Memento~2~wang2025memento2. In the read phase, a behaviour-trainable skill router selects the most relevant skill conditioned on the current stateful prompt; in the write phase, the agent updates and expands its skill library based on new experience. This closed-loop design enables continual learning without updating LLM parameters, as all adaptation is realised through the evolution of externalised skills and prompts. Unlike prior approaches that rely on human-designed agents, Memento-Skills enables a generalist agent to design agents end-to-end for new tasks. Through iterative skill generation and refinement, the system progressively improves its own capabilities. Experiments on the General AI Assistants benchmark and Humanity's Last Exam demonstrate sustained gains, achieving 26.2\% and 116.2\% relative improvements in overall accuracy, respectively. Code is available at https://github.com/Memento-Teams/Memento-Skills.

Post-training for large language models (LLMs) is constrained by the high cost of acquiring new knowledge or correcting errors and by the unintended side effects that frequently arise from retraining. To address these issues, we introduce REPAIR (Robust Editing via Progressive Adaptive Intervention and Reintegration), a lifelong editing framework designed to support precise and low-cost model updates while preserving non-target knowledge. REPAIR mitigates the instability and conflicts of large-scale sequential edits through a closed-loop feedback mechanism coupled with dynamic memory management. Furthermore, by incorporating frequent knowledge fusion and enforcing strong locality guards, REPAIR effectively addresses the shortcomings of traditional distribution-agnostic approaches that often overlook unintended ripple effects. Our experiments demonstrate that REPAIR boosts editing accuracy by 10%-30% across multiple model families and significantly reduces knowledge forgetting. This work introduces a robust framework for developing reliable, scalable, and continually evolving LLMs.

Class-Incremental Learning (CIL) requires models to continually acquire knowledge of new classes without forgetting old ones. Despite Pre-trained Models (PTMs) have shown excellent performance in CIL, catastrophic forgetting still occurs as the model learns new concepts. Existing work seeks to utilize lightweight components to adjust the PTM, while the forgetting phenomenon still comes from {\em parameter and retrieval} levels. Specifically, iterative updates of the model result in parameter drift, while mistakenly retrieving irrelevant modules leads to the mismatch during inference. To this end, we propose MOdel Surgery (MOS) to rescue the model from forgetting previous knowledge. By training task-specific adapters, we continually adjust the PTM to downstream tasks. To mitigate parameter-level forgetting, we present an adapter merging approach to learn task-specific adapters, which aims to bridge the gap between different components while reserve task-specific information. Besides, to address retrieval-level forgetting, we introduce a training-free self-refined adapter retrieval mechanism during inference, which leverages the model's inherent ability for better adapter retrieval. By jointly rectifying the model with those steps, MOS can robustly resist catastrophic forgetting in the learning process. Extensive experiments on seven benchmark datasets validate MOS's state-of-the-art performance. Code is available at: https://github.com/sun-hailong/AAAI25-MOS

Harnessing parallelism in seemingly sequential models is a central challenge for modern machine learning. Several approaches have been proposed for evaluating sequential processes in parallel using iterative fixed-point methods, like Newton, Picard, and Jacobi iterations. In this work, we show that these methods can be understood within a common framework based on linear dynamical systems (LDSs), where different iteration schemes arise naturally as approximate linearizations of a nonlinear recursion. Moreover, we theoretically analyze the rates of convergence of these methods, and we verify the predictions of this theory with several case studies. This unifying framework highlights shared principles behind these techniques and clarifies when particular fixed-point methods are most likely to be effective. By bridging diverse algorithms through the language of LDSs, the framework provides a clearer theoretical foundation for parallelizing sequential models and points toward new opportunities for efficient and scalable computation.

Language model agents increasingly operate over long interaction streams, requiring online adaptation to distribution shifts through continual learning. However, existing agent harnesses typically either evolve their states only through forward information flow or rely on additional replay or validation data for harness optimization. To address this, we propose ReHarness, a recurrent harness framework for agentic continual learning that complements forward read and write with backward revision under a strictly online streaming protocol. We ask what information could have been captured differently in the harness state to better inform the current instance in the stream. Specifically, after each instance, we leverage the resulting trajectory as feedback to revise the reflections retrieved for that instance, thereby propagating feedback backward through the textual harness state. Across three continual learning benchmarks and three language model backbones, ReHarness consistently outperforms strong raw-context baselines, memory- and reflection-based methods, and prompt optimization approaches. Further analysis shows that ReHarness produces source-grounded and meaningful revisions, corrects overgeneralized or outdated experience under distribution shifts, and improves both stability and plasticity during continual learning.

To cope with real-world dynamics, an intelligent system needs to incrementally acquire, update, accumulate, and exploit knowledge throughout its lifetime. This ability, known as continual learning, provides a foundation for AI systems to develop themselves adaptively. In a general sense, continual learning is explicitly limited by catastrophic forgetting, where learning a new task usually results in a dramatic performance degradation of the old tasks. Beyond this, increasingly numerous advances have emerged in recent years that largely extend the understanding and application of continual learning. The growing and widespread interest in this direction demonstrates its realistic significance as well as complexity. In this work, we present a comprehensive survey of continual learning, seeking to bridge the basic settings, theoretical foundations, representative methods, and practical applications. Based on existing theoretical and empirical results, we summarize the general objectives of continual learning as ensuring a proper stability-plasticity trade-off and an adequate intra/inter-task generalizability in the context of resource efficiency. Then we provide a state-of-the-art and elaborated taxonomy, extensively analyzing how representative methods address continual learning, and how they are adapted to particular challenges in realistic applications. Through an in-depth discussion of promising directions, we believe that such a holistic perspective can greatly facilitate subsequent exploration in this field and beyond.

Computer-use agents can execute increasingly complex tasks in graphical interfaces, but their interaction experience is typically transient: procedural knowledge acquired from one rollout is not systematically retained, refined, and reused in later tasks. Existing skill libraries provide external procedural knowledge, yet their incremental value over the same agent operating without skills, as well as their longitudinal dynamics under repeated interaction, remain insufficiently characterized. We present an online skill-evolution framework that converts interaction trajectories and evaluator feedback into a persistent, versioned library of reusable procedures. Each iteration executes against a frozen library snapshot, and evidence-guided skill updates become available in subsequent iterations without changing model parameters. We compare the full evolving-library system with a configuration-matched empty-library control across four OSWorld application domains under the same fixed action-generation and GUI-grounding stack, task sets, and iteration horizons. Following a five-iteration empty-library warm-up, Full attains a higher post-warm-up mean evaluator score in all four observed domain runs, with mean differences ranging from 5.7 to 18.6 percentage points and domain-dependent temporal stability. In GIMP, provenance-aware analysis reveals retrieval across task-of-origin boundaries and revision churn, where repeated accepted edits fail to recover the originating task. These findings characterize evolving skill libraries as auditable, shared procedural memory that can improve a fixed computer-use stack, while showing that their benefits are conditional and repeated revision does not guarantee recovery. Code is released at https://github.com/LongtaoHu/Skill-Evo4GUI.

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

We introduce Reprompting, an iterative sampling algorithm that searches for the Chain-of-Thought (CoT) recipes for a given task without human intervention. Through Gibbs sampling, we infer CoT recipes that work consistently well for a set of training samples. Our method iteratively samples new recipes using previously sampled solutions as parent prompts to solve other training problems. On five Big-Bench Hard tasks that require multi-step reasoning, Reprompting achieves consistently better performance than the zero-shot, few-shot, and human-written CoT baselines. Reprompting can also facilitate transfer of knowledge from a stronger model to a weaker model leading to substantially improved performance of the weaker model. Overall, Reprompting brings up to +17 point improvements over the previous state-of-the-art method that uses human-written CoT prompts.

Continual learning treats degradation on previously seen data as evidence of failure, a convention inherited from settings with a stationary prediction target, where a correct label remains correct indefinitely. World models do not satisfy this condition. Their prediction target is the environment, which changes, so knowledge that was accurate when acquired may later become false, and discarding it is required behavior rather than a defect. Non-stationary ground truth is well studied in the concept drift literature and in the temporal factuality of language models, but has not been formulated for world models, which are distinctive in that they also encode knowledge that must never be revised. We argue that continual world models require retention stratified by invariance timescale, separating invariants such as physics and object permanence, which must never be revised, from instance-level facts that should be revised as soon as the environment changes. Standard forgetting metrics cannot distinguish a world model that has correctly revised outdated knowledge from one that has suffered catastrophic forgetting, and consequently rank a frozen model highest, while existing physical-reasoning benchmarks evaluate only frozen checkpoints. We propose differential retention, which reports invariant regression testing across the adaptation stream jointly with revision latency, without aggregation.

Iterative self-training (self-distillation) repeatedly refits a model on pseudo-labels generated by its own predictions. We study this procedure in overparameterized linear regression: an initial estimator is trained on noisy labels, and each subsequent iterate is trained on fresh covariates with noiseless pseudo-labels from the previous model. In the high-dimensional regime, we derive deterministic-equivalent recursions for the prediction risk and effective noise across iterations, and prove that the empirical quantities concentrate sharply around these limits. The recursion separates two competing forces: a systematic component that grows with iteration due to progressive signal forgetting, and a stochastic component that decays due to denoising via repeated data-dependent projections. Their interaction yields a U-shaped test-risk curve and an optimal early-stopping time. In spiked covariance models, iteration further acts as an iteration-dependent spectral filter that preserves strong eigendirections while suppressing weaker ones, inducing an implicit form of soft feature selection distinct from ridge regression. Finally, we propose an iterated generalized cross-validation criterion and prove its uniform consistency for estimating the risk along the self-training trajectory, enabling fully data-driven selection of the stopping time and regularization. Experiments on synthetic covariances validate the theory and illustrate the predicted denoising-forgetting trade-off.

Humans continuously learn from experience, whereas conventional large language model (LLM) evaluations ignore the models' ability to improve through inference-time interaction. In this paper, we study how LLMs learn from iterative experience at test time, a setting we refer to as Chain-of-Experience (CoE), where models accumulate experiential traces through iterative interactions with self or environmental feedback to form a continual improvement loop beyond zero-shot inference. We instantiate CoE with diverse feedback mechanisms, including model self-feedback and environmental signals such as correctness or public coding test pass rates, and evaluate across math, coding, and knowledge domains using 8 LLMs, including GPT-5, Gemini-2.5 Pro, Claude-4.5 Sonnet. Our study shows that leveraging iterative experience consistently outperforms feedback-free baselines, achieving substantial gains with self feedback alone, alongside a 5.6% overall improvement and 19% lower API cost across tasks and models. We further show that combining complementary feedback channels (e.g., model and correctness signals) yields additional gains, and that CoE delivers higher accuracy per token than existing test-time strategies. We observe a positive correlation between LLM base ability and improvement capacity, and show that models remain robust under weak or spurious feedback, with different feedback contributing to distinct improvement aspects and most gains emerging early in the iterations.

Change data synthesis provides a cost-effective solution for expanding training data and improving the performance of change detection models. However, existing synthesis methods typically rely on handcrafted rules to simulate changes, where limited coverage of class transitions restricts the diversity of synthesized data, while predefined transition designs limit their flexibility in accommodating varied change types. In this work, we introduce KnowChange, a knowledge-guided change data synthesis framework that leverages pretrained vision-language models as knowledge sources to reason about plausible change locations and class transitions from pre-change scenes and desired change types. By integrating knowledge-guided change simulation with generalizable synthesis models, KnowChange enables flexible synthesis of diverse change types within a unified framework. Extensive experiments demonstrate that KnowChange-generated data consistently outperforms existing synthetic datasets in both synthetic-to-real transfer and synthetic data augmentation, despite being generated at a compact scale. Further analyses show that the knowledge-guided change simulation can be seamlessly integrated into existing synthesis pipelines and enhance the downstream utility of synthesized data.

Continual learning systems are increasingly deployed in environments where retraining or reset is infeasible, yet many approaches emphasize task performance rather than the evolution of internal representations over time. In this work, we study a minimal continual learning agent designed to isolate representational dynamics from architectural complexity and optimization objectives. The agent maintains a persistent state vector across executions and incrementally updates it as new textual data is introduced. We quantify representational change using cosine similarity between successive normalized state vectors and define a stability metric over time intervals. Longitudinal experiments across eight executions reveal a transition from an initial plastic regime to a stable representational regime under consistent input. A deliberately introduced semantic perturbation produces a bounded decrease in similarity, followed by recovery and restabilization under subsequent coherent input. These results demonstrate that meaningful stability plasticity tradeoffs can emerge in a minimal, stateful learning system without explicit regularization, replay, or architectural complexity. The work establishes a transparent empirical baseline for studying representational accumulation and adaptation in continual learning systems.

A language-model agent is jointly defined by its model and its harness, the executable program that organizes model calls, tool use, and information flow. Because different tasks call for different ways of organizing these operations, the harness needs to be adapted using feedback from the task at hand. We introduce harness learning, which trains a proposer model to revise a solver's harness using execution feedback. We formulate this process as meta-learning over executable programs, with harness revisions playing the role of weight updates in gradient-based adaptation. We train the proposer with reinforcement learning, using the task performance of revised harnesses as the reward. At test time, the proposer uses feedback from successive executions on a new task to refine the harness, without performing any parameter-space update. Experiments on reasoning and multi-hop question answering show that harness learning improves revision quality and that the ability to adapt at test time transfers to unseen tasks. Policies trained on individual revisions can continue improving harnesses over multiple rounds, while the benefits of training on revision sequences vary across settings. These findings suggest a path towards continually learning agents that turn accumulated experience into generalizable improvements.

Test-time scaling via sequential revision has emerged as a powerful paradigm for enhancing Large Language Model (LLM) reasoning. However, standard post-training methods primarily optimize single-shot objectives, creating a fundamental misalignment with multi-step inference dynamics. While recent work treats this as multi-turn reinforcement learning (RL), conventional approaches optimize over the multi-step trajectories directly, failing to further exploit the high-quality mistakes in intermediate steps that model can learn from correcting them. We propose a two-stage iterative framework that alternates between online data/prompt augmentation and policy optimization. By converting the intermediate steps (``near-miss'' answers) in the successful recovery trajectories into decoupled revision and verification prompts, our approach concentrates training on both effective answer transformation and error identification. This approach enables efficient off-policy data generation and reduces the computational overhead of long-horizon sampling compared to standard multi-turn RL. On LiveCodeBench, using publicly available test cases as feedback, we observe gains of +6.5 points over the RL baseline and +4.0 points over standard multi-turn training. Beyond coding, our approach matches the previously reported SOTA result on circle packing while using the smallest base model (4B) and far fewer rollouts than the much larger evolutionary search systems. Math results under ground-truth verification further confirm improved correction ability. It also generalizes to out-of-distribution constraint-satisfaction puzzles such as n\_queens and mini\_sudoku, where correctness is defined entirely by problem constraints. Code is available at https://github.com/yxliu02/REVES.git.

Recent work using pretrained transformers has shown impressive performance when fine-tuned with data from the downstream problem of interest. However, they struggle to retain that performance when the data characteristics changes. In this paper, we focus on continual learning, where a pre-trained transformer is updated to perform well on new data, while retaining its performance on data it was previously trained on. Earlier works have tackled this primarily through methods inspired from prompt tuning. We question this choice, and investigate the applicability of Low Rank Adaptation (LoRA) to continual learning. On a range of domain-incremental learning benchmarks, our LoRA-based solution, CoLoR, yields state-of-the-art performance, while still being as parameter efficient as the prompt tuning based methods.

As large language models are increasingly responsible for online content, concerns arise about the impact of repeatedly processing their own outputs. Inspired by the "broken telephone" effect in chained human communication, this study investigates whether LLMs similarly distort information through iterative generation. Through translation-based experiments, we find that distortion accumulates over time, influenced by language choice and chain complexity. While degradation is inevitable, it can be mitigated through strategic prompting techniques. These findings contribute to discussions on the long-term effects of AI-mediated information propagation, raising important questions about the reliability of LLM-generated content in iterative workflows.

Online continual learning (CL) studies the problem of learning continuously from a single-pass data stream while adapting to new data and mitigating catastrophic forgetting. Recently, by storing a small subset of old data, replay-based methods have shown promising performance. Unlike previous methods that focus on sample storage or knowledge distillation against catastrophic forgetting, this paper aims to understand why the online learning models fail to generalize well from a new perspective of shortcut learning. We identify shortcut learning as the key limiting factor for online CL, where the learned features may be biased, not generalizable to new tasks, and may have an adverse impact on knowledge distillation. To tackle this issue, we present the online prototype learning (OnPro) framework for online CL. First, we propose online prototype equilibrium to learn representative features against shortcut learning and discriminative features to avoid class confusion, ultimately achieving an equilibrium status that separates all seen classes well while learning new classes. Second, with the feedback of online prototypes, we devise a novel adaptive prototypical feedback mechanism to sense the classes that are easily misclassified and then enhance their boundaries. Extensive experimental results on widely-used benchmark datasets demonstrate the superior performance of OnPro over the state-of-the-art baseline methods. Source code is available at https://github.com/weilllllls/OnPro.

Industrial recommender systems face the challenge of operating in non-stationary environments, where data distribution shifts arise from evolving user behaviors over time. To tackle this challenge, a common approach is to periodically re-train or incrementally update deployed deep models with newly observed data, resulting in a continual training process. However, the conventional learning paradigm of neural networks relies on iterative gradient-based updates with a small learning rate, making it slow for large recommendation models to adapt. In this paper, we introduce ReLoop2, a self-correcting learning loop that facilitates fast model adaptation in online recommender systems through responsive error compensation. Inspired by the slow-fast complementary learning system observed in human brains, we propose an error memory module that directly stores error samples from incoming data streams. These stored samples are subsequently leveraged to compensate for model prediction errors during testing, particularly under distribution shifts. The error memory module is designed with fast access capabilities and undergoes continual refreshing with newly observed data samples during the model serving phase to support fast model adaptation. We evaluate the effectiveness of ReLoop2 on three open benchmark datasets as well as a real-world production dataset. The results demonstrate the potential of ReLoop2 in enhancing the responsiveness and adaptiveness of recommender systems operating in non-stationary environments.

Adapting to concept drift is a challenging task in machine learning, which is usually tackled using incremental learning techniques that periodically re-fit a learning model leveraging newly available data. A primary limitation of these techniques is their reliance on substantial amounts of data for retraining. The necessity of acquiring fresh data introduces temporal delays prior to retraining, potentially rendering the models inaccurate if a sudden concept drift occurs in-between two consecutive retrainings. In communication networks, such issue emerges when performing traffic forecasting following a~failure event: post-failure re-routing may induce a drastic shift in distribution and pattern of traffic data, thus requiring a timely model adaptation. In this work, we address this challenge for the problem of traffic forecasting and propose an approach that exploits adaptive learning algorithms, namely, liquid neural networks, which are capable of self-adaptation to abrupt changes in data patterns without requiring any retraining. Through extensive simulations of failure scenarios, we compare the predictive performance of our proposed approach to that of a reference method based on incremental learning. Experimental results show that our proposed approach outperforms incremental learning-based methods in situations where the shifts in traffic patterns are drastic.

AI systems built around large models increasingly use experience and feedback to make persistent changes to models, prompts, memories, tools, and workflows. Recursive self-improvement (RSI) extends this process to inductive biases and to the mechanisms that govern future updates, which can themselves be revised and reused across improvement cycles. Yet self-modification alone does not guarantee trustworthy improvement. Reported gains may reflect flawed evaluations, previously acquired capabilities may deteriorate, and compliance with behavioral constraints may weaken. Compromised artifacts or sensitive information may also persist in successor systems. Changes to improvement mechanisms may invalidate earlier verification results and make human oversight less effective. This survey presents an operational definition and process framework for RSI and organizes the requirements for trustworthy RSI into four interconnected themes: genuine and sustained improvement; behavioral constraints, alignment, and fairness; system security and privacy; and transparency and controllability. We examine these themes from three perspectives: Improvement Validity, Constraint Preservation, and Effective Oversight. This analysis covers improvement diagnosis, proposal generation, proposal evaluation, and update implementation (S1--S4), including the recursive application of these stages to improvement mechanisms (RI). We review risks, safeguards, and evaluation evidence for individual updates, effects inherited by successor systems, and revisions to improvement mechanisms, while distinguishing direct RSI findings from evidence in related systems. Finally, we examine evaluation settings, identify requirements for independent and longitudinal assessment, and discuss applications and open research problems.

Editing knowledge in large language models is an attractive capability to have which allows us to correct incorrectly learnt facts during pre-training, as well as update the model with an ever-growing list of new facts. While existing model editing techniques have shown promise, they are usually evaluated using metrics for reliability, specificity and generalization over one or few edits. We argue that for model editing to have practical utility, we must be able to make multiple edits to the same model. With this in mind, we evaluate the current model editing methods at scale, focusing on two state of the art methods: ROME and MEMIT. We find that as the model is edited sequentially with multiple facts, it continually forgets previously edited facts and the ability to perform downstream tasks. This forgetting happens in two phases -- an initial gradual but progressive forgetting phase followed by abrupt or catastrophic forgetting phase. Both gradual and catastrophic forgetting limit the usefulness of model editing methods at scale -- the former making model editing less effective as multiple edits are made to the model while the latter caps the scalability of such model editing methods. Our analysis also highlights other key limitations of ROME and MEMIT at scale. With our work, we push for the development and evaluation of model editing methods keeping scalability in mind.

Large pre-trained models decay over long-term deployment as input distributions shift, user requirements change, or crucial knowledge gaps are discovered. Recently, model editors have been proposed to modify a model's behavior by adjusting its weights during deployment. However, when editing the same model multiple times, these approaches quickly decay a model's performance on upstream data and forget how to fix previous errors. We propose and study a novel Lifelong Model Editing setting, where streaming errors are identified for a deployed model and we update the model to correct its predictions without influencing unrelated inputs without access to training edits, exogenous datasets, or any upstream data for the edited model. To approach this problem, we introduce General Retrieval Adaptors for Continual Editing, or GRACE, which learns to cache a chosen layer's activations in an adaptive codebook as edits stream in, leaving original model weights frozen. GRACE can thus edit models thousands of times in a row using only streaming errors, without influencing unrelated inputs. Experimentally, we show that GRACE improves over recent alternatives and generalizes to unseen inputs. Our code is available at https://www.github.com/thartvigsen/grace.

Recent advancements in prompt engineering strategies, such as Chain-of-Thought (CoT) and Self-Discover, have demonstrated significant potential in improving the reasoning abilities of Large Language Models (LLMs). However, these state-of-the-art (SOTA) prompting strategies rely on single or fixed set of static seed reasoning modules like "think step by step" or "break down this problem" intended to simulate human approach to problem-solving. This constraint limits the flexibility of models in tackling diverse problems effectively. In this paper, we introduce Auto-Evolve, a novel framework that enables LLMs to self-create dynamic reasoning modules and downstream action plan, resulting in significant improvements over current SOTA methods. We evaluate Auto-Evolve on the challenging BigBench-Hard (BBH) dataset with Claude 2.0, Claude 3 Sonnet, Mistral Large, and GPT 4, where it consistently outperforms the SOTA prompt strategies. Auto-Evolve outperforms CoT by up to 10.4% and on an average by 7% across these four models. Our framework introduces two innovations: a) Auto-Evolve dynamically generates reasoning modules for each task while aligning with human reasoning paradigm, thus eliminating the need for predefined templates. b) We introduce an iterative refinement component, that incrementally refines instruction guidance for LLMs and helps boost performance by average 2.8% compared to doing it in a single step.

Self-evolving skill systems promise to improve agents by turning execution feedback into persistent skill updates without changing the underlying model. Yet it remains unclear when further evolution helps, how successful and failed trajectories shape revision, and whether extra test-time computation can recover the same gains. To address these questions, we present a controlled evaluation framework across five benchmarks and three models. Our primary study contains 42 feedback runs across 14 supported model-benchmark settings. Within each setting, we hold the executor and optimizer configuration, revision procedure, validation rule, and round budget fixed, while varying only the feedback shown to the optimizer: successes and failures (Normal), failures only, or successes only. Evolution is sparse: only 55 of 388 candidates establish byte-distinct validation bests. Validation-based selection chooses an evolved skill in 11 of 14 settings, nine of which improve released-test performance. All 11 selections come from feedback conditions that include failed trajectories, although the relative ranking of Normal and Fail-only varies across settings. Validation and downstream evaluations on test, robustness, and transfer sometimes favor different feedback views. A broader SearchQA analysis covering eight models shows similarly sparse, feedback-dependent dynamics. In the GPT-5.5 test-time-scaling controls, oracle Parallel Sampling comes within 0.43 points of the evolved SearchQA skill but remains 30.96 points behind on SpreadsheetBench; Sequential Refinement recovers neither gain. Overall, persistent skill self-evolution is better understood as sparse, validation-filtered search with model- and benchmark-dependent returns, rather than steady improvement from additional rounds. The implementation is available at https://github.com/HKUST-KnowComp/rethinkskill.

A long-standing goal of AI is a model that can continually learn and improve itself. On post-trained models, supervised finetuning (SFT) on new data often causes poor generalization and catastrophic forgetting. As such, the conventional wisdom is that on-policy training is a prerequisite for continual learning. In practice, however, data containing new knowledge or capabilities are often off-policy. While methods such as on-policy self-distillation (OPSD) try to bridge this gap by converting off-policy data into on-policy signal, they have been shown to cause reasoning collapse. In this paper, we show that off-policy merging beats OPSD for continual learning. We first show that SFT learns a useful signal from new data, but naively applying its update interferes with existing capabilities. We reduce this interference with a simple recipe we term grafting, which changes where the update is learned and how it is applied: (1) learning the update on an earlier donor checkpoint, ideally even before the end of pretraining, and applying the weight update to the post-trained model; (2) scaling the weight update, equivalent to a form of model merging; and (3) optionally, masking the most sensitive update directions when the new data distribution is far from the post-trained model. Across continual learning settings including (1) distilling from expert traces, (2) self-improvement with STaR and Pedagogical RL, and (3) injecting knowledge after pretraining cutoff, grafting Pareto-dominates both SFT and OPSD in new-task and old-task performance, while avoiding expensive on-policy sampling. Therefore, our work challenges on-policy training as a necessity for continual learning on RL-trained models.

Recent personalization methods for diffusion models, such as Dreambooth, allow fine-tuning pre-trained models to generate new concepts. However, applying these techniques across multiple tasks in order to include, e.g., several new objects or styles, leads to mutual interference between their adapters. While recent studies attempt to mitigate this issue by combining trained adapters across tasks after fine-tuning, we adopt a more rigorous regime and investigate the personalization of large diffusion models under a continual learning scenario, where such interference leads to catastrophic forgetting of previous knowledge. To that end, we evaluate the na\"ive continual fine-tuning of customized models and compare this approach with three methods for consecutive adapters' training: sequentially merging new adapters, merging orthogonally initialized adapters, and updating only relevant parameters according to the task. In our experiments, we show that the proposed approaches mitigate forgetting when compared to the na\"ive approach.

Stronger AI agents do not automatically produce better organizations: teams must also learn which work arrangements to retain and when to reconsider them. We propose a modeling specification for recursive organization improvement and evaluate it through an executable checker, a public-record mapping, and controlled simulation. The specification connects actor-visible histories, organizational memory, decision rights, and evidence-carrying change contracts. The mechanism study crosses six decision rules, three memory conditions, and three task environments under fixed resource ceilings. In a stationary environment, cumulative evidence raises balanced evaluation's normalized net value per task from 0.45224 to 0.48007. Repeated reassessment's disadvantage relative to this comparator falls from 0.01702 with reset evidence to 0.00007 with cumulative evidence. A reversal of the best workflow reveals the opposite cost: indefinite retention delays adaptation, while a finite window restores eventual performance at a transition cost. In exploratory controls, matching trial acquisition and label reuse reduces the apparent reassessment gain from 0.00607 to 0.00191. Program replacement adds no stable benefit across the tested reversal times. The study identifies evidence acquisition, reuse, and timely updating as mechanisms that must be separated from evaluator replacement when assessing organizational improvement.

Large Vision-Language Models (VLMs) have demonstrated significant potential on complex visual understanding tasks through iterative optimization methods.However, these models generally lack effective self-correction mechanisms, making it difficult for them to independently rectify cognitive biases. Consequently, during multi-turn revisions, they often fall into repetitive and ineffective attempts, failing to achieve stable improvements in answer quality.To address this issue, we propose a novel iterative self-correction framework that endows models with two key capabilities: Capability Reflection and Memory Reflection. This framework guides the model to first diagnose errors and generate a correction plan via Capability Reflection, then leverage Memory Reflection to review past attempts to avoid repetition and explore new solutions, and finally, optimize the answer through rigorous re-reasoning. Experiments on the challenging OCRBench v2 benchmark show that OCR-Agent outperforms the current open-source SOTA model InternVL3-8B by +2.0 on English and +1.2 on Chinese subsets, while achieving state-of-the-art results in Visual Understanding (79.9) and Reasoning (66.5) - surpassing even larger fine-tuned models. Our method demonstrates that structured, self-aware reflection can significantly enhance VLMs' reasoning robustness without additional training. Code: https://github.com/AIGeeksGroup/OCR-Agent.

Large language models often solve independent problems in the same conversation. Can computation from earlier problems help them solve new ones? To answer this question, we first conduct preliminary experiments showing that retained history can raise or lower later-turn accuracy, even within the same domain. To understand these effects, we use controlled replay to isolate internal state changes specific to each problem-history pairing. Across different histories, these changes preserve similar relationships among current problems. To improve reasoning under retained history, we introduce STAIR (Stale-Token Attention for Inter-query Reuse). STAIR captures keys and values from earlier response generation in a fixed bank. It learns to redirect current queries when they read this bank during prompt processing. The base model remains frozen; only 12,288 parameters are trained. Across three Qwen models and four benchmarks, STAIR improves average later-turn accuracy by up to 11.67 percentage points over the unmodified model with history.

Interactive language-model agents increasingly solve complex tasks through long-horizon, multi-call reasoning, where errors in beliefs or actions can compound across tool interactions. Retrospective search can recover from such failures but is prone to misallocation. Delayed outcomes obscure the contribution of intermediate search decisions, leading to Attribution Complexity, while evolving execution evidence leads to Adaptation Complexity, where previously learned estimates become stale. To address these challenges, we first introduce Search Value Dynamics (SVD), which characterizes the evolving trade-off between the gain and cost of retrospective search. Building on SVD, we propose ForkPilot, a self-evolving two-stage policy-learning framework. In the first stage, ForkPilot learns a search-value policy offline from completed trajectories through automatically constructed outcome comparisons. In the second stage, it makes search decisions based on current observations and then self-evolves by incorporating newly completed trajectories into subsequent policy updates. We evaluate ForkPilot across 6 diverse benchmarks and 7 widely used LLM backbone families, including four open-source families, GPT-5.6 Sol, and Opus 4.8 in a production agentic system, against 9 competitive baselines, including a real-world harness deployment used by hundreds of thousands of paid users. ForkPilot achieves comparable state-of-the-art performance while reducing token usage by up to 59.2%, demonstrating its efficacy.

Large language models offer broad capabilities, but adapting them to evolving domains, tools, and requirements often entails repeated post-training. Autonomous systems automate parts of this process by proposing updates, training candidates, and using evaluation feedback to select subsequent proposals. As evidence accumulates, a central problem emerges: which past update evidence remains actionable after subsequent training has changed the parent model? An update's effect depends on its parent, data, and training stage. Treating past success as context-free permission can waste compute. If the resulting child is promoted, it can also degrade the subsequent training trajectory. We formulate this problem as conditional experience transfer and introduce Boundary-Calibrated Intervention Transfer (BCIT), a method that authorizes experience reuse before weight-changing training. BCIT binds an observed effect to its source context, checks applicability conditions, vetoes candidates with named hard conflicts, and obtains current-state evidence through a bounded training trial when needed. Fully trained candidates still face a shared adoption rule, and only observed events extend memory. On one 4B model adapted across finance reasoning, text-to-SQL, and function calling, candidate updates exhibit heterogeneous target and retention effects across the evaluated contexts. Under matched candidates, evidence, and compute, BCIT authorizes fewer harmful updates and attains higher equal-budget final-model quality than the evaluated alternatives. These results support treating experience authorization as a distinct problem in autonomous post-training.

An agent can improve its behavior within an unresolved problem by changing how it acts and which experience it retains. We propose MMLA-RSI, a recursive self-improvement scheme with two implementations in Memory-Mediated Learning Architecture: Reasoning-Time Training (RTT) changes the policy state Φ, while Reasoning-Time Memory Adaptation (RTMA) changes authoritative memory M. Each route also makes its adaptation method an object of improvement. A current numerical updater trains the policy proposing its successor; a current memory manager chooses the records available to the process proposing its successor. An independently admitted successor takes over the same role in the next generation. We give bounded executable rule languages, shared task/proposal interfaces, and one algorithm for either route or their composition. The RTT instance changes scalar schedules in a clipped-momentum update. The RTMA instance chooses NULL or a complete-row write with possible eviction. A fixed interpreter, trusted committer, and independent evaluator bound what can change. State versions, read closures, and conditional properties describe causal execution, accepted transitions, and finite work. Existing numerical-component studies motivate the construction. In four-candidate program selection, retaining LARC feedback updates reduces expected error by 24.65 and 36.65 percentage points for two trained initializations. In chronological continuous-integration replay, feedback binding is positive while retention increases loss. Completed SQL studies improve substantially over an unadapted substrate but do not establish the required additional online benefit. These results characterize their declared components. The two recursive routes and their joint realization are specified here; their beneficial recursive chains and discovery efficiency remain to be evaluated.

In continual learning (CL), model growth enhances adaptability to new data. However, when model growth is applied improperly, especially in task-agnostic CL, where the entire grown model is used for inference, it can lead to severe degradation of learned knowledge, a problem we term growth-induced forgetting. Most existing methods that adopt model growth to improve adaptability often overlook the forgetting issue, resulting in compromised knowledge retention, making them unsuitable for task-agnostic settings. To promote both adaptability and knowledge retention with model growth, we identify the key: gradient and parameter sparsity. Introducing SparseGrow, which increases gradient sparsity through layer expansion and gradient gating to enable focused updates on parameters while preserving critical parameters, thus inhibiting forgetting. Moreover, it promotes parameter sparsity with sparse initialization and training, aiming at better control of model plasticity, improving adaptability over new data. Extensive experiments across diverse datasets, task-agnostic settings, and a large number of tasks demonstrate the necessity of controlled layer expansion and validate the effectiveness of SparseGrow in achieving high adaptability while minimizing forgetting in continual learning. By enabling model growth with sparsified gradients and parameters, SparseGrow paves the way for building scalable lifelong learning systems capable of continual adaptation with better knowledge retention.

Skills have become the de facto way to enable LLM agents to perform complex real-world tasks with customized instructions, workflows, and tools, but how to learn them automatically and effectively remains unclear. We introduce SkillLearnBench, the first benchmark for evaluating continual skill learning methods, comprising 20 verified, skill-dependent tasks across 15 sub-domains derived from a real-world skill taxonomy , evaluated at three levels: skill quality, execution trajectory, and task outcome. Using this benchmark, we evaluate recent continual learning techniques, those leveraging one-shot, self/teacher feedback, and skill creator to generate skills from agent experiences. We find that all continual learning methods improve over the no-skill baseline, yet consistent gains remain elusive: no method leads across all tasks and LLMs, and scaling to stronger LLMs does not reliably help. Continual learning improves tasks with clear, reusable workflows but struggles on open-ended tasks, and using stronger LLM backbones does not consistently produce better skills. Our analysis also revealed that multiple iterations in continual learning facilitate genuine improvement via external feedback, whereas self-feedback alone induces recursive drift. Our data and code are open-source at https://github.com/cxcscmu/SkillLearnBench to enable further studies of automatic skill generation and continual learning techniques.

We introduce a novel interactive satellite image change detection algorithm based on active learning. The proposed method is iterative and consists in frugally probing the user (oracle) about the labels of the most critical images, and according to the oracle's annotations, it updates change detection results. First, we consider a probabilistic framework which assigns to each unlabeled sample a relevance measure modeling how critical is that sample when training change detection functions. We obtain these relevance measures by minimizing an objective function mixing diversity, representativity and uncertainty. These criteria when combined allow exploring different data modes and also refining change detections. Then, we further explore the potential of this objective function, by considering a reinforcement learning approach that finds the best combination of diversity, representativity and uncertainty as well as display-sizes through active learning iterations, leading to better generalization as shown through experiments in interactive satellite image change detection.

A user's movie, news, and dialogue histories differ in their native actions and outputs, yet each interaction supplies evidence that can update user memory. We study whether these histories can train one reusable update mechanism. An action-on-item schema pairs a mapped interaction role with a content embedding, allowing shared update parameters to operate on separate user states. We establish invariance to native relabeling, bounded state changes under item-embedding perturbations, and a pooled-training bound under explicit compatibility conditions. The Multi-Timescale State Hypothesis (MTSH) specifies how this evidence enters, persists, and is consumed; PerTIDE implements it with action gating, three state-space traces, fusion, and command-conditioned readout. On PENS, the same history encoder supports both next-news prediction and personalized headline generation. In a controlled PENS-to-MovieLens experiment, a frozen source-trained core exceeds an identically structured random core by 15.23 MRR points after fitting the same target consumer. On MIND, PerTIDE retains a 4.12-point MRR advantage over a same-input three-branch state-space control. Action, readout, and trace interventions identify complementary contributions to these gains. Together, the theory and experiments support learning history updates across compatible sources and reusing them through predictive and generative consumers.

Agent skill evolution seeks to improve reusable procedural guidance for large language model (LLM) agents through iterative revision. Existing methods base each revision mainly on execution trajectories or feedback, leaving recurring behavioral requirements across tasks implicit and tying revision to the behavior of the current skill. We introduce SkillFocus, which decomposes recurring task requirements into a capability space that remains fixed as the skill evolves, separating what tasks require from how the current skill behaves. SkillFocus maps current task outcomes to this space to identify the capability that leaves the most tasks unresolved, then uses that capability to determine what to revise and which evidence to use. Across four benchmarks spanning heterogeneous tasks, SkillFocus achieves the best held-out accuracy on all four, outperforming the strongest competing result by 5.7 points on average while using 24\% fewer evolution tokens on average than the closest iterative baseline. Controlled studies further show that capabilities derived from recurring task requirements outperform task-semantic and execution-derived alternatives, while randomizing task--capability assignments reduces final accuracy by up to 20.2 points. Matching evidence to the selected capability increases candidate gain by 4.4 points under prioritized revision.

While Pre-trained Language Models (PLMs) internalize a great amount of world knowledge, they have been shown incapable of recalling these knowledge to solve tasks requiring complex & multi-step reasoning. Similar to how humans develop a "chain of thought" for these tasks, how can we equip PLMs with such abilities? In this work, we explore an iterative prompting framework, a new prompting paradigm which progressively elicits relevant knowledge from PLMs for multi-step inference. We identify key limitations of existing prompting methods, namely they are either restricted to queries with a single identifiable relation/predicate, or being agnostic to input contexts, which makes it difficult to capture variabilities across different inference steps. We propose an iterative context-aware prompter, which addresses these limitations by learning to dynamically synthesize prompts conditioned on the current step's contexts. Experiments on three datasets involving multi-step reasoning show the effectiveness of the iterative scheme and the context-aware prompter design.

Large language models hold promise as scientific assistants, yet existing agents either rely solely on algorithm evolution or on deep research in isolation, both of which face critical limitations. Pure algorithm evolution, as in AlphaEvolve, depends only on the internal knowledge of LLMs and quickly plateaus in complex domains, while pure deep research proposes ideas without validation, resulting in unrealistic or unimplementable solutions. We present DeepEvolve, an agent that integrates deep research with algorithm evolution, uniting external knowledge retrieval, cross-file code editing, and systematic debugging under a feedback-driven iterative loop. Each iteration not only proposes new hypotheses but also refines, implements, and tests them, avoiding both shallow improvements and unproductive over-refinements. Across nine benchmarks in chemistry, mathematics, biology, materials, and patents, DeepEvolve consistently improves the initial algorithm, producing executable new algorithms with sustained gains. By bridging the gap between unguided evolution and research without grounding, DeepEvolve provides a reliable framework for advancing scientific algorithm discovery. Our code is available at https://github.com/liugangcode/deepevolve.

The emergence of Agentic AI systems has outpaced the architectural thinking required to operate them effectively. These agents differ fundamentally from traditional software: their behavior is not fixed at deployment but continuously shaped by experience, feedback, and context. Applying operational principles inherited from DevOps or MLOps, built for deterministic software and traditional ML systems, assumes that system behavior can be managed through versioning, monitoring, and rollback. This assumption breaks down for Agentic AI systems whose learning trajectories diverge over time. This introduces non-determinism making system reliability a challenge at runtime. We argue that architecting such systems requires a shift from managing control loops to enabling dynamic co-evolution among agents, infrastructure, and human oversight. To guide this shift, we introduce CHANGE, a conceptual framework comprising six capabilities for operationalizing Agentic AI systems: Contextualize, Harmonize, Anticipate, Negotiate, Generate, and Evolve. CHANGE provides a foundation for architecting an AgentOps platform to manage the lifecycle of evolving Agentic AI systems, illustrated through a customer-support system scenario. In doing so, CHANGE redefines software architecture for an era where adaptation to uncertainty and continuous evolution are inherent properties of the system.

LLM agents increasingly rely on iterative execution to solve tasks through planning, tool use, state updates, and agent collaboration. While this design enables flexible automation, it also creates a new class of failures: an agent may repeatedly execute model calls, tools, workflow transitions, or agent handoffs when the feedback path is not effectively bounded. We call this problem Infinite Agentic Loops (IALs). IALs are not ordinary programming loops; they arise from the interaction between agent logic, framework semantics, runtime observations, and termination mechanisms. Such failures can amplify a single request into long running model and tool execution, causing cost exhaustion, model denial of service, context growth, and repeated external side effects. We propose IAL-Scan, a static analysis tool for detecting IAL failures in real-world LLM agent projects. IAL-Scan abstracts heterogeneous agent code into a framework independent Agent IR, builds an Agentic Loop Dependence Graph (ALDG) to recover explicit and framework induced feedback paths, and checks whether these paths can repeatedly reach costly or state growing operations without an effective bound. We evaluate IAL-Scan on 6,549 LLM agent repositories. It reports 74 potential findings, among which manual review confirms 68 IAL failures across 47 projects, achieving 91.9% precision.

Continual learning can incrementally absorb new concepts without interfering with previously learned knowledge. Motivated by the characteristics of neural networks, in which information is stored in weights on connections, we investigated how to design an Innately Forgetting-Free Network (IF2Net) for continual learning context. This study proposed a straightforward yet effective learning paradigm by ingeniously keeping the weights relative to each seen task untouched before and after learning a new task. We first presented the novel representation-level learning on task sequences with random weights. This technique refers to tweaking the drifted representations caused by randomization back to their separate task-optimal working states, but the involved weights are frozen and reused (opposite to well-known layer-wise updates of weights). Then, sequential decision-making without forgetting can be achieved by projecting the output weight updates into the parsimonious orthogonal space, making the adaptations not disturb old knowledge while maintaining model plasticity. IF2Net allows a single network to inherently learn unlimited mapping rules without telling task identities at test time by integrating the respective strengths of randomization and orthogonalization. We validated the effectiveness of our approach in the extensive theoretical analysis and empirical study.

Recursive self-improvement requires agents to turn accumulated experience into better future behavior. Personal AI agents offer a concrete setting for studying this capability because they retain preferences, task histories, tool routines, and learned skills across sessions. Yet whether retained experience actually improves them over time has not been systematically tested. We introduce PAST-Bench, a benchmark designed to isolate this question. Each agent runs through ordered sequences of fresh-session tasks under matched conditions that turn retained experience on and off. It spans 26 scenarios and 204 episodes across memory, procedural reuse, information gathering, and update. We report both later-task gains and whether those gains follow the intended save, retrieve, and update pathway. Across seven base models and four agent frameworks, improvement is real but uneven across capabilities. Agents with the same headline gain can differ markedly in whether that gain is supported by evidence of the intended pathway. Guided by these findings, we develop Hermes+, which extends Hermes with five targeted interventions across stages of the agent loop. Hermes+ raises the average gain from retained experience and provides clearer pathway evidence, with its strongest improvement on tasks requiring outdated state to be replaced, although the effect remains capability- and model-dependent. Together, PAST-Bench and Hermes+ provide an evaluation and diagnostic foundation for studying how persistent agents can progress from retaining experience to systematically improving through it. Code: https://github.com/Gen-Verse/PAST-Bench

Catastrophic forgetting, the tendency of neural networks to forget previously learned knowledge when learning new tasks, has been a major challenge in continual learning (CL). To tackle this challenge, CL methods have been proposed and shown to reduce forgetting. Furthermore, CL models deployed in mission-critical settings can benefit from uncertainty awareness by calibrating their predictions to reliably assess their confidences. However, existing uncertainty-aware continual learning methods suffer from high computational overhead and incompatibility with mainstream replay methods. To address this, we propose idempotent experience replay (IDER), a novel approach based on the idempotent property where repeated function applications yield the same output. Specifically, we first adapt the training loss to make model idempotent on current data streams. In addition, we introduce an idempotence distillation loss. We feed the output of the current model back into the old checkpoint and then minimize the distance between this reprocessed output and the original output of the current model. This yields a simple and effective new baseline for building reliable continual learners, which can be seamlessly integrated with other CL approaches. Extensive experiments on different CL benchmarks demonstrate that IDER consistently improves prediction reliability while simultaneously boosting accuracy and reducing forgetting. Our results suggest the potential of idempotence as a promising principle for deploying efficient and trustworthy continual learning systems in real-world applications.Our code is available at https://github.com/YutingLi0606/Idempotent-Continual-Learning.

Generative recommendation has emerged as a promising end-to-end paradigm for personalized recommendation. However, user preferences continuously evolve over time, making self-evolving an essential capability for generative recommender systems. Existing evolving strategies, such as continual retraining and distillation-based adaptation, directly update the shared model parameters using streaming interactions. Nevertheless, we find that directly applying such strategies to generative recommendation introduces a critical issue, termed evolution conflict. Specifically, heterogeneous preference shifts from different users are optimized within a fully shared autoregressive parameter space, causing dominant behavioral patterns to progressively dominate the model evolution process while underrepresented patterns become increasingly overlooked. To address this issue, we propose a self-evolving memory paradigm for generative recommendation, aiming to enable effective evolution across heterogeneous behavioral patterns. We further identify three key principles for effective self-evolving recommendation systems, including isolated memorization, reinforced evolution, and scalable application. Guided by these principles, we develop LION, a simple yet effective framework centered on a sparse Key-Value memory layer. Specifically, LION introduces sparse memory activation to isolate the evolution of different behavioral patterns, while a consolidation loss is designed to reinforce the learning of underrepresented preference dynamics during continual adaptation. Extensive experiments on diverse real-world datasets demonstrate the effectiveness of LION under various continual evolution settings (e.g., per-period evaluation, user/item group evaluation, and evolution convergence analysis). The codes are released at https://github.com/JazyJiang/Self-Evolving-Memory-for-Generative-Recommendation.

Large language model (LLM) agents are increasingly equipped with memory, which are stored experience and reusable guidance that can improve task-solving performance. Recent self-evolving systems update memory based on interaction outcomes, but most existing evolution pipelines are developed for static train/test splits and only approximate online learning by folding static benchmarks, making them brittle under true distribution shift and continuous feedback. We introduce Live-Evo, an online self-evolving memory system that learns from a stream of incoming data over time. Live-Evo decouples what happened from how to use it via an Experience Bank and a Meta-Guideline Bank, compiling task-adaptive guidelines from retrieved experiences for each task. To manage memory online, Live-Evo maintains experience weights and updates them from feedback: experiences that consistently help are reinforced and retrieved more often, while misleading or stale experiences are down-weighted and gradually forgotten, analogous to reinforcement and decay in human memory. On the live Prophet Arena benchmark over a 10-week horizon, Live-Evo improves Brier score by 20.8\% and increases market returns by 12.9\%, while also transferring to deep-research benchmarks with consistent gains over strong baselines. Our code is available at https://github.com/ag2ai/Live-Evo.

Solving problems through repeated attempts is a sequential modeling task: at each step, the solver receives feedback and decides how to revise their solutions. Predicting whether performance improves, plateaus, or regresses across attempts is central to understanding any iterative problem-solving process in both human learners and autonomous agents. Beyond outcomes, modeling what errors persist and how strategies shift across attempts provides deeper insight into the mechanics of sequential learning. Studying these dynamics requires observing many solvers as they attempt, receive feedback, and revise. Programming courses with automated grading provide this setting, as students iteratively submit code to test suites and receive feedback on every attempt. We therefore curate CodeInsight, a large-scale dataset of over 3 million submissions from 3,286 undergraduates across 2 introductory C++ courses in 2 academic years, with test-case-level outcomes, timestamps, and source code. On this dataset, we build a benchmark that evaluates models spanning parametric, sequential, and generative traditions under a shared calibration-and-scoring protocol, including a Recurrent State Space Model (RSSM) adapted to track solver characteristics through discrete latent variables and an LLM-based predictor that generates explicit solutions. The adapted RSSM achieves the strongest predictive accuracy on three of the four courses. The LLM predictor is less accurate but produces full submissions at each attempt, enabling direct analysis of failure modes. We find that the model's coding proficiency is inversely related to predictive performance in this setting, with the LLM better understood as a generative solver conditioned on context rather than a faithful predictor of solver behavior. We publicly release our code and the dataset on request to facilitate future research.

Large language models (LLMs) demonstrate exceptional performance in numerous tasks but still heavily rely on knowledge stored in their parameters. Moreover, updating this knowledge incurs high training costs. Retrieval-augmented generation (RAG) methods address this issue by integrating external knowledge. The model can answer questions it couldn't previously by retrieving knowledge relevant to the query. This approach improves performance in certain scenarios for specific tasks. However, if irrelevant texts are retrieved, it may impair model performance. In this paper, we propose Retrieval Augmented Iterative Self-Feedback (RA-ISF), a framework that iteratively decomposes tasks and processes them in three submodules to enhance the model's problem-solving capabilities. Experiments show that our method outperforms existing benchmarks, performing well on models like GPT3.5, Llama2, significantly enhancing factual reasoning capabilities and reducing hallucinations.

Large language models frequently fail to produce correct code on their first attempt, yet most benchmarks evaluate them in a single-shot setting. We investigate iterative self-repair (feeding execution errors back to the model for correction) across seven models spanning three families and both open-weight and proprietary providers: Llama 3.1 8B, Llama 3.3 70B, Llama 4 Scout (MoE, 16 experts), Llama 4 Maverick (MoE, 128 experts), Qwen3 32B, Gemini 2.5 Flash, and Gemini 2.5 Pro. On HumanEval (164 problems) and MBPP Sanitized (257 problems) with up to five attempts, self-repair universally improves pass rates: +4.9 to +17.1 pp on HumanEval and +16.0 to +30.0 pp on MBPP. Gemini 2.5 Flash achieves the highest final pass rates (96.3% HumanEval, 93.8% MBPP). Most gains concentrate in the first two rounds.Error-type analysis shows assertion errors (logical mistakes) are the hardest to repair at ~45%, while syntax and name errors are repaired at substantially higher rates, connecting to broader findings on the limits of LLM self-correction. Prior work found that weaker models fail at self-repair or require fine-tuning; we show that modern instruction-tuned models succeed with prompting alone, even at 8B scale. We also provide the first comparison of dense and MoE architectures for self-repair, and extend the repair-vs-resampling tradeoff analysis to modern models. A prompt ablation reveals chain-of-thought repair yields up to +5.5 pp additional self-repair gain (measured as improvement in repair delta) over minimal prompting for capable models.

Current Large Language Model (LLM) agents show strong performance in tool use, but lack the crucial capability to systematically learn from their own experiences. While existing frameworks mainly focus on mitigating external knowledge gaps, they fail to address a more fundamental limitation: the inability to iteratively refine problem-solving strategies. In this work, we introduce EvolveR, a framework designed to enable agent to self-improve through a complete, closed-loop experience lifecycle. This lifecycle comprises two key stages: (1) Offline Self-Distillation, where the agent's interaction trajectories are synthesized into a structured repository of abstract, reusable strategic principles; (2) Online Interaction, where the agent interacts with tasks and actively retrieves distilled principles to guide its decision-making, accumulating a diverse set of behavioral trajectories. This loop employs a policy reinforcement mechanism to iteratively update the agent based on its performance. We demonstrate the effectiveness of EvolveR on complex multi-hop question-answering benchmarks, where it achieves superior performance over strong agentic baselines. Our work presents a comprehensive blueprint for agents that learn not only from external data but also from the consequences of their own actions, paving the way for more autonomous and continuously improving systems. Code is available at https://github.com/Edaizi/EvolveR.

Since experiencing domain shifts during test-time is inevitable in practice, test-time adaption (TTA) continues to adapt the model after deployment. Recently, the area of continual and gradual test-time adaptation (TTA) emerged. In contrast to standard TTA, continual TTA considers not only a single domain shift, but a sequence of shifts. Gradual TTA further exploits the property that some shifts evolve gradually over time. Since in both settings long test sequences are present, error accumulation needs to be addressed for methods relying on self-training. In this work, we propose and show that in the setting of TTA, the symmetric cross-entropy is better suited as a consistency loss for mean teachers compared to the commonly used cross-entropy. This is justified by our analysis with respect to the (symmetric) cross-entropy's gradient properties. To pull the test feature space closer to the source domain, where the pre-trained model is well posed, contrastive learning is leveraged. Since applications differ in their requirements, we address several settings, including having source data available and the more challenging source-free setting. We demonstrate the effectiveness of our proposed method 'robust mean teacher' (RMT) on the continual and gradual corruption benchmarks CIFAR10C, CIFAR100C, and Imagenet-C. We further consider ImageNet-R and propose a new continual DomainNet-126 benchmark. State-of-the-art results are achieved on all benchmarks.

Continual learning consists of algorithms that learn from a stream of data/tasks continuously and adaptively thought time, enabling the incremental development of ever more complex knowledge and skills. The lack of consensus in evaluating continual learning algorithms and the almost exclusive focus on forgetting motivate us to propose a more comprehensive set of implementation independent metrics accounting for several factors we believe have practical implications worth considering in the deployment of real AI systems that learn continually: accuracy or performance over time, backward and forward knowledge transfer, memory overhead as well as computational efficiency. Drawing inspiration from the standard Multi-Attribute Value Theory (MAVT) we further propose to fuse these metrics into a single score for ranking purposes and we evaluate our proposal with five continual learning strategies on the iCIFAR-100 continual learning benchmark.

A large body of research in continual learning is devoted to overcoming the catastrophic forgetting of neural networks by designing new algorithms that are robust to the distribution shifts. However, the majority of these works are strictly focused on the "algorithmic" part of continual learning for a "fixed neural network architecture", and the implications of using different architectures are mostly neglected. Even the few existing continual learning methods that modify the model assume a fixed architecture and aim to develop an algorithm that efficiently uses the model throughout the learning experience. However, in this work, we show that the choice of architecture can significantly impact the continual learning performance, and different architectures lead to different trade-offs between the ability to remember previous tasks and learning new ones. Moreover, we study the impact of various architectural decisions, and our findings entail best practices and recommendations that can improve the continual learning performance.

Recommendation algorithm iteration is moving from an artisanal, engineer-bound process toward an industrialized research loop, but this transition remains blocked by a structural execution bottleneck: the idea-to-launch cycle still depends on human engineers to generate hypotheses, modify production code, launch A/B experiments, and attribute online results. Innovation therefore scales linearly with headcount rather than compounding with evidence, compute, and accumulated experimental knowledge. We present AgentX, a production-deployed multi-agent system that fundamentally restructures this production function. AgentX operates as a self-evolving development engine: it autonomously generates, implements, evaluates, and learns from recommendation experiments at a scale and pace that no manual workflow can sustain. The system orchestrates four tightly coupled stages in a closed loop. A Brainstorm Agent synthesizes evidence from historical experiments, system architecture, data analysis, and external research into ranked, executable proposals. A Developing Agent translates each proposal into production-ready code through repository-grounded generation and multi-dimensional reliability verification. An Evaluation Agent conducts safe online rollout with guardrail-vetoed A/B judgment, converting both successes and failures into structured knowledge assets. A Harness Evolution layer (SGPO) then distills execution trajectories into semantic-gradient updates that continuously sharpen the agents themselves -- making the system not merely automated, but self-improving.

Many people aim for change, but not everyone succeeds. While there are a number of social psychology theories that propose motivation-related characteristics of those who persist with change, few computational studies have explored the motivational stage of personal change. In this paper, we investigate a new dataset consisting of the writings of people who manifest intention to change, some of whom persist while others do not. Using a variety of linguistic analysis techniques, we first examine the writing patterns that distinguish the two groups of people. Persistent people tend to reference more topics related to long-term self-improvement and use a more complicated writing style. Drawing on these consistent differences, we build a classifier that can reliably identify the people more likely to persist, based on their language. Our experiments provide new insights into the motivation-related behavior of people who persist with their intention to change.

Advanced diffusion models like RPG, Stable Diffusion 3 and FLUX have made notable strides in compositional text-to-image generation. However, these methods typically exhibit distinct strengths for compositional generation, with some excelling in handling attribute binding and others in spatial relationships. This disparity highlights the need for an approach that can leverage the complementary strengths of various models to comprehensively improve the composition capability. To this end, we introduce IterComp, a novel framework that aggregates composition-aware model preferences from multiple models and employs an iterative feedback learning approach to enhance compositional generation. Specifically, we curate a gallery of six powerful open-source diffusion models and evaluate their three key compositional metrics: attribute binding, spatial relationships, and non-spatial relationships. Based on these metrics, we develop a composition-aware model preference dataset comprising numerous image-rank pairs to train composition-aware reward models. Then, we propose an iterative feedback learning method to enhance compositionality in a closed-loop manner, enabling the progressive self-refinement of both the base diffusion model and reward models over multiple iterations. Theoretical proof demonstrates the effectiveness and extensive experiments show our significant superiority over previous SOTA methods (e.g., Omost and FLUX), particularly in multi-category object composition and complex semantic alignment. IterComp opens new research avenues in reward feedback learning for diffusion models and compositional generation. Code: https://github.com/YangLing0818/IterComp

In Continual learning (CL) balancing effective adaptation while combating catastrophic forgetting is a central challenge. Many of the recent best-performing methods utilize various forms of prior task data, e.g. a replay buffer, to tackle the catastrophic forgetting problem. Having access to previous task data can be restrictive in many real-world scenarios, for example when task data is sensitive or proprietary. To overcome the necessity of using previous tasks' data, in this work, we start with strong representation learning methods that have been shown to be less prone to forgetting. We propose a holistic approach to jointly learn the representation and class prototypes while maintaining the relevance of old class prototypes and their embedded similarities. Specifically, samples are mapped to an embedding space where the representations are learned using a supervised contrastive loss. Class prototypes are evolved continually in the same latent space, enabling learning and prediction at any point. To continually adapt the prototypes without keeping any prior task data, we propose a novel distillation loss that constrains class prototypes to maintain relative similarities as compared to new task data. This method yields state-of-the-art performance in the task-incremental setting, outperforming methods relying on large amounts of data, and provides strong performance in the class-incremental setting without using any stored data points.

Time series forecasting always faces the challenge of concept drift, where data distributions evolve over time, leading to a decline in forecast model performance. Existing solutions are based on online learning, which continually organize recent time series observations as new training samples and update model parameters according to the forecasting feedback on recent data. However, they overlook a critical issue: obtaining ground-truth future values of each sample should be delayed until after the forecast horizon. This delay creates a temporal gap between the training samples and the test sample. Our empirical analysis reveals that the gap can introduce concept drift, causing forecast models to adapt to outdated concepts. In this paper, we present Proceed, a novel proactive model adaptation framework for online time series forecasting. Proceed first estimates the concept drift between the recently used training samples and the current test sample. It then employs an adaptation generator to efficiently translate the estimated drift into parameter adjustments, proactively adapting the model to the test sample. To enhance the generalization capability of the framework, Proceed is trained on synthetic diverse concept drifts. Extensive experiments on five real-world datasets across various forecast models demonstrate that Proceed brings more performance improvements than the state-of-the-art online learning methods, significantly facilitating forecast models' resilience against concept drifts. Code is available at https://github.com/SJTU-DMTai/OnlineTSF.

Iterative refinement has been a promising paradigm to enable large language models (LLMs) to resolve difficult reasoning and problem-solving tasks. One of the key challenges, however, is how to effectively search through the enormous search space of possible refinements. Existing methods typically fall back on predefined heuristics, which are troubled by the exploration-exploitation dilemma and cannot adapt based on past refinement outcomes. We introduce Tree-Guided Policy Refinement (TGPR), a novel framework that combines GRPO with a Thompson-Sampling-based tree search. TGPR explores both failed and successful refinement paths actively, with denser training trajectories and more adaptive policies. On HumanEval, MBPP, and APPS benchmarks, our method achieves up to +4.2 percentage points absolute improvement in pass@1 (on MBPP) and up to +12.51 percentage points absolute improvement in pass@10 (on APPS) compared to a competitive GRPO baseline. Apart from debugging code, TGPR focuses on a principled approach to combining learned policies with structured search methods, offering a general framework for enhancing iterative refinement and stateful reasoning in LLMs.

Recent work identifies a mid-depth band of verbalisable, causally potent representations in a standard feedforward transformer --- a functional analogue of a global workspace. Whether the same workspace functionality emerges when depth is implemented through recurrence rather than a stack of distinct layers remains unknown. Looped and depth-recurrent transformers provide a direct test of this question because they reuse the same weights across depth. We extend the Jacobian lens to iterated architectures using a virtual-unrolling adapter. We apply the full workspace suite --- lens fitting, readout, and eleven causal experiment families --- to Ouro-2.6B (48 layers looped 4 times, deeply supervised) and Huginn-0125 (a 4-layer core recurred 16 times, trained for latent reasoning), using Qwen3.6-27B (64 untied layers) as the standard baseline. We find that a workspace forms in the iterated part of each architecture, but that recurrence changes how it can be accessed. Ouro reconstructs workspace content in every loop, and linear transport cannot carry that content across loop boundaries; writes and ablations must therefore span every remaining loop. Huginn carries content forward across all sixteen recurrences, while reads, writes, and ablations act only within a sliding window of roughly two recurrences. Whether newly injected content can be verbalised tracks explicit per-iteration supervision; whether existing content can be steered does not.

Looped Transformers repeatedly apply the same set of Transformer layers, giving them a recurrent architecture for latent computation. Their strong performance on iterative reasoning and length-generalization tasks suggests an appealing explanation: recurrence may provide an inductive bias that lets the model reuse a learned algorithm across loops. However, weight sharing alone does not imply that every loop performs the same operation. This raises a basic question: is each loop actually repeating the same computation, and if not, what routes the shared parameters to different operations? We study this question using graph walks as a test case. In the model's native trajectories, decoded predictions can advance by different numbers of graph steps or remain at a reached target, showing that recurrent progress need not follow a fixed one-loop-one-step pattern. We then show that a frozen loop can be steered toward different transitions by modifying its entering hidden state: a learned linear layer J selects the desired transition without changing the shared Transformer layers. To test how this steering works, we use activation patching and find that attention patterns can recover its effects and switch the selected transition. Across five matched pairs of graph models, changing intermediate supervision during backbone training changes which transitions J can induce. This suggests that J selects computations learned by the backbone rather than creating new algorithms. Together, these results show that the hidden state can control shared computation, with attention routing as a causal pathway.

Recently, large language models (LLMs) have demonstrated excellent performance in understanding human instructions and generating code, which has inspired researchers to explore the feasibility of generating RTL code with LLMs. However, the existing approaches to fine-tune LLMs on RTL codes typically are conducted on fixed datasets, which do not fully stimulate the capability of LLMs and require large amounts of reference data. To mitigate these issues , we introduce a simple yet effective iterative training paradigm named ITERTL. During each iteration, samples are drawn from the model trained in the previous cycle. Then these new samples are employed for training in this loop. Through this iterative approach, the distribution mismatch between the model and the training samples is reduced. Additionally, the model is thus enabled to explore a broader generative space and receive more comprehensive feedback. Theoretical analyses are conducted to investigate the mechanism of the effectiveness. Experimental results show the model trained through our proposed approach can compete with and even outperform the state-of-the-art (SOTA) open-source model with nearly 37\% reference samples, achieving remarkable 42.9\% and 62.2\% pass@1 rate on two VerilogEval evaluation datasets respectively. While using the same amount of reference samples, our method can achieved a relative improvement of 16.9\% and 12.5\% in pass@1 compared to the non-iterative method. This study facilitates the application of LLMs for generating RTL code in practical scenarios with limited data.

Foundation models are transitioning from offline predictors to deployed systems expected to operate over long time horizons. In real deployments, objectives are not fixed: domains drift, user preferences evolve, and new tasks appear after the model has shipped. This elevates continual learning and instant personalization from optional features to core architectural requirements. Yet most adaptation pipelines still follow a static weight paradigm: after training (or after any adaptation step), inference executes a single parameter vector regardless of user intent, domain, or instance-specific constraints. This treats the trained or adapted model as a single point in parameter space. In heterogeneous and continually evolving regimes, distinct objectives can induce separated feasible regions over parameters, forcing any single shared update into compromise, interference, or overspecialization. As a result, continual learning and personalization are often implemented as repeated overwriting of shared weights, risking degradation of previously learned behaviors. We propose HY-WU (Weight Unleashing), a memory-first adaptation framework that shifts adaptation pressure away from overwriting a single shared parameter point. HY-WU implements functional (operator-level) memory as a neural module: a generator that synthesizes weight updates on-the-fly from the instance condition, yielding instance-specific operators without test-time optimization.

LLM agents increasingly adapt to recurring tasks by accumulating procedural knowledge in skills. These skills are lightweight, reusable textual artifacts that are loaded into the agent's context without weight updates. Recent methods refine skills through iterative task execution, failure diagnosis, and trajectory-guided text-space updates. However, existing frameworks lack explicit diagnosis--outcome feedback and treat deletion as a generic edit operation rather than a dedicated mechanism for consolidating accumulated knowledge. We introduce SkillProx, a proximal-gradient-inspired forward--backward framework that couples closed-loop diagnostic evolution with utility-aware proximal refinement. Motivated by a composite objective balancing task loss and skill complexity, the forward stage re-executes diagnosis-driven edits on the same task batch, rolls back regressions, and feeds measured outcomes into subsequent diagnoses. The backward stage decomposes the resulting skill into auditable knowledge units, estimates their contributions using a frozen leave-one-out utility audit, and applies validation-gated consolidation, demotion, or removal. Experiments on in-distribution and out-of-distribution benchmarks across multiple backbone LLMs show that SkillProx improves average accuracy by 3.0 percentage points over the strongest gradient-based baseline. Component ablations demonstrate the complementary effects of closed-loop diagnosis and proximal refinement.

Long-horizon autonomous agents require memory systems to retain historical information, track evolving states, and reuse relevant knowledge beyond finite context windows. Existing agentic memory systems typically follow a memory construction-retrieval (MCR) pipeline, but often adapt mainly the memory bank while keeping the surrounding pipeline fixed after deployment. This fixed-pipeline design struggles to handle heterogeneous task-specific failure modes and can become misaligned with memory banks that evolve in scale and structure over time. To address these limitations, we propose MemPro, a system-level evolution framework that treats the entire MCR pipeline as an evolvable program rather than adapting only the memory bank or prompt text. MemPro maintains a version tree of runnable memory-system implementations, where an Evolving Agent iteratively selects promising versions, diagnoses recurring failures, and creates improved child versions through failure-mode-guided edit-debug refinement. Experiments on LongMemEval, LoCoMo, HotpotQA, and NarrativeQA show that MemPro consistently outperforms strong static and prompt-level evolving baselines within a few iterations, continues to improve with evolution, and achieves a favorable performance-cost trade-off. Code is available at https://github.com/wanghai673/MemPro.

Continual learning has largely been model-centric, treating model parameters as the state that changes with sequential experience. Modern agents can also adapt through a harness of prompts, memories, tools, skills, and routing rules. Because these contents jointly shape later execution, a harness update can disrupt previously reliable behavior even when the model is frozen. This raises a new question: how can an agent continually improve its state outside the model while retaining behavior acquired earlier? We formulate Harness Continual Learning (HCL), a new continual learning paradigm in which the harness evolves around a frozen foundation model, and define the resulting loss of earlier behavior as harness-level forgetting. We instantiate HCL with four execution-facing components: the Task Interface, Experience Memory, Capability Map, and Adaptive Router. We further introduce guarded harness evolution to separate update generation from state commitment. A Continual Optimizer proposes candidate harnesses from post-execution feedback, and a Continual Evaluator commits the resulting candidate harness only after checking current improvement, historical retention, and validity. Experiments on textual reasoning, multimodal perception, and open-world interaction demonstrate capability accumulation and failure recovery, with relative gains exceeding 10% over corresponding baselines in multiple settings. Component ablations assess the contribution of each harness component, while controlled retention sweeps reveal measurable harness-level forgetting and show that the stability--plasticity trade-off can be explicitly adjusted.

Building learning agents that can progressively learn and accumulate knowledge is the core goal of the continual learning (CL) research field. Unfortunately, training a model on new data usually compromises the performance on past data. In the CL literature, this effect is referred to as catastrophic forgetting (CF). CF has been largely studied, and a plethora of methods have been proposed to address it on short sequences of non-overlapping tasks. In such setups, CF always leads to a quick and significant drop in performance in past tasks. Nevertheless, despite CF, recent work showed that SGD training on linear models accumulates knowledge in a CL regression setup. This phenomenon becomes especially visible when tasks reoccur. We might then wonder if DNNs trained with SGD or any standard gradient-based optimization accumulate knowledge in such a way. Such phenomena would have interesting consequences for applying DNNs to real continual scenarios. Indeed, standard gradient-based optimization methods are significantly less computationally expensive than existing CL algorithms. In this paper, we study the progressive knowledge accumulation (KA) in DNNs trained with gradient-based algorithms in long sequences of tasks with data re-occurrence. We propose a new framework, SCoLe (Scaling Continual Learning), to investigate KA and discover that catastrophic forgetting has a limited effect on DNNs trained with SGD. When trained on long sequences with data sparsely re-occurring, the overall accuracy improves, which might be counter-intuitive given the CF phenomenon. We empirically investigate KA in DNNs under various data occurrence frequencies and propose simple and scalable strategies to increase knowledge accumulation in DNNs.

A dense, pretrained language model can be retrofitted with recurrent depth and learn an iterative latent transition that persists after outcome-only annealing. Qwen2.5-0.5B-Instruct is split into a Prelude, a weight-tied Recurrent Block, and a Coda, with an identity-preserving one-loop path and a re-entry bridge on later loops. At loop 1 the retrofit remains non-inferior to its base on a preregistered ARC battery. Three findings. First, the mechanism is a reusable procedure rather than terminal-answer lookup, and installs at two budgets: 6M trained parameters over frozen base weights and 180M full-block. With intermediate-step supervision, the model computes one task step per loop and persists when only final answers are graded. The adapter matched the full block overall (83.8% versus 84.0%), led through depth 11, and trailed beyond. Verbal fine-tuning reached 79-86% on controlled verbal renderings (zero-shot transfer was minimal), and adapter verbal training begun from the installed mechanism outpaced matched fresh training by 18.6 points, including on a held-out test set. Second, the operation extrapolates to roughly 1.5 times its supervised depth, holding 70% accuracy through depth 18. Third, a same-size scratchpad-trained model matched the recurrent model within its learned horizon but collapsed beyond it. The recurrent model won overall, 84% versus 72%, retained 53% versus 2.5% beyond depth 10, and answered 7.6 times faster. An iterative transformer can therefore perform deeper reasoning in latent space faster than comparable or larger models fine-tuned on the same task, in a system-level comparison. A second task, running the rule in reverse, exposed the limits: the inverse was learnable in isolation, but no continuation acquired it while preserving the installed mechanism and general capability, a catastrophic-interference boundary. Learned depth selection remains open.

Continual learning is a promising machine learning paradigm to learn new tasks while retaining previously learned knowledge over streaming training data. Till now, rehearsal-based methods, keeping a small part of data from old tasks as a memory buffer, have shown good performance in mitigating catastrophic forgetting for previously learned knowledge. However, most of these methods typically treat each new task equally, which may not adequately consider the relationship or similarity between old and new tasks. Furthermore, these methods commonly neglect sample importance in the continual training process and result in sub-optimal performance on certain tasks. To address this challenging problem, we propose Relational Experience Replay (RER), a bi-level learning framework, to adaptively tune task-wise relationships and sample importance within each task to achieve a better `stability' and `plasticity' trade-off. As such, the proposed method is capable of accumulating new knowledge while consolidating previously learned old knowledge during continual learning. Extensive experiments conducted on three publicly available datasets (i.e., CIFAR-10, CIFAR-100, and Tiny ImageNet) show that the proposed method can consistently improve the performance of all baselines and surpass current state-of-the-art methods.